• 제목/요약/키워드: Fine powder

검색결과 1,185건 처리시간 0.022초

전기로 제강분진에 함유된 금속원소의 휘발거동에 대한 속도론적 연구 (A Study on Kinetic of Volatilization Behavior of Metal Elements Contained in Electric Arc Furnace Dust)

  • 윤재홍;윤치현;이명원
    • 자원리싸이클링
    • /
    • 제26권3호
    • /
    • pp.17-25
    • /
    • 2017
  • 전기로 제강분진은 고철을 전기로에서 용해하는 과정에서 발생하는 휘발성분들이 공기 중의 산소와 반응하여 산화물형태로 포집된 미세분말로써 다양한 특성을 가지고 있다. 이러한 전기로 제강분진의 효율적인 자원화를 위해서 반응속도론적 기초실험과 Pilot 규모의 생산실험을 병행하여 실시하였다. 그 결과 전기로 제강분진은 다양한 구성성분과 화합물로 구성되어 있었으며 공통적으로 Cl과 알카리 성분이 다량으로 존재함에 따라 자원화를 위한 실제 조업에 큰 악영향을 미치는 화합물의 형성이 예상된다. 휘발거동은 $1100^{\circ}C$ 영역에서 활발히 진행되고 $1250^{\circ}C$ 영역에서는 용융현상이 나타남을 확인할 수 있었다. 이러한 결과는 Pilot규모의 실증테스트의 결과로 얻은 조산화아연과 환원철의 형성거동에서도 동일한 결과를 얻었다. 이러한 결과는 전기로 제강분진의 자원화 플랜트의 설계 및 조업조건 설정에 유용한 기초자료로 활용이 기대된다.

이수석고가 고로슬래그 미분말 베이스 무시멘트 모르타르의 기초물성에 미치는 영향 (Effect of Calcium Sulfate Dihydrate (Gypsum) on the Fundamental Properties of Slag-based Mortar)

  • 백병훈;한천구
    • 한국건축시공학회지
    • /
    • 제14권3호
    • /
    • pp.252-258
    • /
    • 2014
  • 최근에 저탄소녹색성장 및 OPC 절감의 요구에 따라 BS와 같은 산업 부산물을 많이 사용하고 재건축의 증가 및 건설폐기물 발생량이 많아지면서 RA 사용 확대하게 되며, RA 및 무 시멘트 결합재 관심 증대 되고 있다. 무 시멘트 결합재와 RA의 활용을 모두 만족시키기 위하여, RA와 철강 산업 부산물인 BS을 혼합함으로써, 100% 순환자원만을 활용하여 무 시멘트 상태에서 강도발현성을 확인한 바 있다.이에 본 연구는 OPC를 사용하지 않고, BS과 RA 및 CS를 사용하여 모르타르를 제조함으로써 기존 강알칼리를 투입하여 제조하는 지오폴리머 모르타르(Geopolymermortar)와 또 다른 관점에서 접근하였다. 결과적으로, RFA의 유동성 저하 및 초기강도 저하문제만 해결 될 수 있다면, BS에 CS를 15% 치환하고 RFA골재를 사용하는 무 시멘트 모르타르가 OPC 100%를 사용한 종래의 시멘트 모르타르 만큼의 품질을 발휘할 수 있을 것으로 사료된다.

Sol-gel 합성에 의한 자성 garnet $Y_{3-x}Bi_xFe_5O_{12}$의 결정학적 및 Mossbauer 분광학 연구 (Crystallographic and Mossbauer Studies of Magnetic Garnet $Y_{3-x}Bi_xFe_5O_{12}$ by a Sol-Gel Method)

  • 엄영란;김철성;이재광
    • 한국자기학회지
    • /
    • 제8권4호
    • /
    • pp.203-209
    • /
    • 1998
  • Single phase garmet Y3-xBixFe5O12(x=0.0, 0.25, 0.5, 0.75, 1.0)을 ethylene glycol을 용매로 하여 sol-gel 법으로 합성후 x-ray diffraction, Mossbauer 분광기, vibrating sample magnetometer (VSM)를 이용하여 결정학적 및 자기적 특성을 연구하였다. Y과 Fe의 수화 반응을 통하여 얻은 Y3Fe5O12의 x-ray 회절 분석 결과는 결정구조가 cubic임을 알 수 있었고 Y에 Bi를 치환한 경우 또한 cubic 구조이었으며 Bi의 치환 량이 증가할수록 격자 상수가 선형적으로 증가함을 알수 있었다. Bi를 첨가한 Y3-xBixFe5O12 (x=0.0, 0.25, 0.5, 0.75, 1.0)의 단일상의 garnet이 형성되기 시작하는 온도는 80$0^{\circ}C$이고 secound phase (BiFeO3)가 생성되기 시작하는 온도는 x=0.75는 100$0^{\circ}C$이며 x-1.0은 95$0^{\circ}C$였다. Mossbauer 분광 실험과 VSM측정 결과 Birk 치환 될수록 포화 자화 값과 coercivity값이 감소하는 경향을 보였으며 Curic 온도는 Bi의 치환 양이 증가할수록 약간 증가하는 경향을 보임을 알 수 있었다.

  • PDF

벤조피렌으로 유도된 마우스 폐선종에 대한 인삼분말의 연근별 항발암효과(II) (Anticarcinogenic Effect of Ginseng Extracts Depending on the Types and Ages Using Yun's Anticarcinogenicity Test(II))

  • Yun, Taik-Koo;Lee, Yun-Sil
    • Journal of Ginseng Research
    • /
    • 제18권3호
    • /
    • pp.160-164
    • /
    • 1994
  • In this study, we investigeated the anticarcinogenicity of various types and ages of ginseng extracts as an extended study using Yun's anticarcinogenicity test. Fresh ginseng at 1.5, 3, 4, 5 and 6 years was dried and powdered. And white ginseng was processed in the same way that of fresh ginseng after removal fo the ginseng cortex and fine root. For red ginsneg, fresh ginseng was steamed and dried. Each ginseng powder was extracted and extracts was freeze dried. Newborn N:GP(S) mice were given a single subcutaneous injection of 0.5 mg of benzo(a)pyrene(BP). Various types and ages of ginseng extracts at 2.5mg/ml were orally administered. All the mice were sacrificed at the 9th week. The following results were obtained. In the dried fresh ginseng extract treated group, the incidence of lung adenoma induced by BP was 63.9% and its incidence was reduced to 48.3%, 52.5%, 51.8%, 47.5% and 44.1% after co-treatment with 1.5, 3, 4, 5 and 6 year-dried fresh ginseng, respectively. The incidence of lung adenoma induced by BP on the white ginseng extract treated group was 41.3% and decreased to 31.0%, 46.0%, 44.0% and 26.5% after co-treatment with 3, 4, 5 and 6 year-white ginseng, respectively. In the red ginseng extract treated group, the incidence of lung adenoma induced by BP was 47.5% and its incidence diminished to 40.7%, 35.0%, 30.1%, 30.0% and 26.3% after co-treatment with 1.5, 3, 4, 5 and 6 year-red ginseng, respectively. From the above results, we concluded that a statistically significant anticarcinogenic effect was observed in extracts of 6 year-dried fresh ginseng, 6 year-white ginseng, and 4, 5 and 6 year-red ginseng and it is suggested that the anticarcinogenicity of ginseng varies according to the types and ages Key words Ginseng extract, types and ages. anticarcinogenic, newborn mice, lung tumor.

  • PDF

광촉매 및 다채널 세라믹 정밀여과 혼성공정에 의한 고탁도 원수의 고도정수처리: 유기물의 영향 (Advanced Water Treatment by Hybrid Process of Multi-channel Ceramic MF and Photocatalyst: Effect of Organic Materials)

  • 볼러 암말사나;박진용
    • 멤브레인
    • /
    • 제21권4호
    • /
    • pp.351-359
    • /
    • 2011
  • For advanced drinking water treatment of high turbidity water, we used the hybrid process that was composed of photocatalyst packing in space of between outside of multi-channel ceramic microfiltration membrane and membrane module inside. Photocatalyst was polypropylene (PP) beads coated $TiO_2$ powder by CVD (chemical vapor deposition) process. Instead of natural organic matters (NOM) and fine inorganic particles in natural water source, standard NOM solution was prepared with humic acid and kaolin. Water-back-flushing of 10 sec was performed per every period of 10 min to minimize membrane fouling. Resistance of membrane fouling ($R_f$) increased and J decreased as concentration of humic acid changed from 2 mg/L to 10 mg/L, and finally the highest total permeate volume ($V_T$) could be obtained at 2 mg/L. Then, treatment efficiency of turbidity and $UV_{254}$ absorbance were above 96.4% and 78.9%, respectively. As results of treatment portions by membrane filtration, photocatalyst adsorption, and photo-oxidation in (MF), (MF + $TiO_2$), (MF + $TiO_2$ + UV) processes, turbidity was treated little by photocatalyst adsorption, and photo-oxidation. However, treatment portions of $UV_{254}$ absorbance by adsorption (MF + $TiO_2$) and photo-oxidation (MF + $TiO_2$ + UV) at humic acid of 4 mg/L and 6 mg/L were above 9.0, 9.5 and 8.1, 10.9%, respectively.

가열방법에 따른 LaCrO$_3$ 연소합성분말의 특성 (Characterization of LaCrO$_3$ Powders Synthesized by Combustion Process with Different Heating Methods)

  • 정층환;박홍규;오석진;박지연
    • 한국세라믹학회지
    • /
    • 제35권10호
    • /
    • pp.1078-1084
    • /
    • 1998
  • 금속 질산염과 urea를 사용하여 연소합성법에 의해 LaCrO3 분말을 제조하고, 용액의 pH를 HNO3와 NH4OH로 조절한 후, 용매의 가열방법에 따른 연소 생성물인 LaCrO3의 형상을 고찰하였다. 연소생성물의 수율은 용액의 pH에 의해 크게 좌우되었다. 용액의 pH가 0.7~4 사이에서는 90% 이상의 수율이 얻어졌으나, 5 이상 또는 0.5 이하의 pH에서는 수율이 크게 감소하였다. 한편, 연소생성물의 형상은 용액의 pH에 무관하였고 용액의 가열방법에 좌우되었다. 용액을 저항가열법으로 가열하여 연소반응시킨 경우의 분말은 미세한 일차입자들이 2차원적으로 연결된 응집체를 형성하고 있었으나, 마이크로파를 인가하여 가열한 경우에는 용액의 pH에 관계없이 미세한 LaCrO3 분말이 얻어졌다. BET 분석 결과, 마이크로파 가열에 의해 얻어진 입자의 비표면적은 25~32m2/g으로 저항가열법으로 가열한 경우의 10-14m2/g에 비해 더 큰 값을 보였다. 이러한 결과는 마이크로파에 의한 연소반응물의 균일한 가열이 연소생성물의 2차원적인 강항 응집체 형성을 억제할 수 있음을 보여 주었다.

  • PDF

기상반응에 의한 SiC-${Si_3}{N_4}$복합 분말의 제조 및 결정화 (Synthesis and Crystallization of Fine SiC-${Si_3}{N_4}$Composite Powders by the Vapor Phase Reaction)

  • 김형인;최재문;김석;소명기
    • 한국세라믹학회지
    • /
    • 제37권11호
    • /
    • pp.1091-1096
    • /
    • 2000
  • 본 연구에서는 기상 반응법을 이용하여 TMS(Tetramethylsilane:Si($CH_3$)$_4$)와 NH$_3$그리고 H$_2$의 혼합기체로부터 반응 온도 1000~120$0^{\circ}C$ 및 입력비(NH$_3$/Si($CH_3$)$_4$) 1~3의 조건에서 초미분의 SiC-Si$_3$N$_4$복합 분말을 합성하였다. 합성되어진 복합 분말들의 결정상의 변화와 평균 입경을 알아보기 위해 XRD와 TEM 분석을 행한 결과, 구형의 비정질 분말이 형성되었으며, 입자의 크기는 약 70~130nm이었다. 입자의 크기는 입력비에 관계없이 거의 일정하였으나 반응 온도가 증가함에 따라서 감소하였다. FT-IR과 EA 분석 결과, 합성되어진 분말은 Si, N, C, 그리고 H로 이루어진 화합물임을 확인할 수 있었다. 또한 입력비가 다른 조건에서 합성되어진 분말을 $N_2$분위기 하에서 155$0^{\circ}C$로 2시간 열처리를 행한 결과, 낮은 입력비인 경우 $\beta$-SiC, $\alpha$-Si$_3$N$_4$$\beta$-Si$_3$N$_4$의 결정상들이 혼재하였으나, 높은 입력비인 경우는 결정화 후 $\alpha$-Si$_3$N$_4$상만이 존재하였다.

  • PDF

방전플라즈마 소결법에 의한 탄화 붕소 세라믹스의 소결 거동 및 기계적 특성 (Sintering Behavior and Mechanical Property of B4C Ceramics Fabricated by Spark Plasma Sintering)

  • 김경훈;채재홍;박주석;김대근;심광보;이병하
    • 한국세라믹학회지
    • /
    • 제45권1호
    • /
    • pp.60-64
    • /
    • 2008
  • [ $B_4C$ ] ceramics were fabricated by spark plasma sintering process and their sintering behavior, microstructure and mechanical properties were evaluated. Relative density of $B_4C$ ceramics could be achieved by spark plasma sintering method reached as high as 99% at lower temperature than conventional sintering method, in addition, without any sintering additives. The mechanical properties of $B_4C$ ceramics could be improved by the heat treatment at $1300^{\circ}C$ during sintering process which can be removed $B_2O_3$ phase from a $B_4C$ powder surface. This improvement results from the formation of a fine and homogeneous microstructure because the grain coarsening was suppressed by the elimination of $B_2O_3$ phase. Particularly, mechanical properties of the specimen experienced the $B_2O_3$ removing process improved over 30% compared with the specimen without that process.

산업부산물의 혼입에 따른 콘크리트 특성의 실험적 연구 (An Experimental Study On the Properties blended with industrial by products Using Mineral Admixture)

  • Kim, Dongbaek;Jun, Kyeongbae
    • 한국재난정보학회 논문집
    • /
    • 제10권2호
    • /
    • pp.238-243
    • /
    • 2014
  • 최근 세계적으로 환경오염이 심각해짐에 따라 환경보호의 일환으로 자원 재활용과 연관하여 시멘트의 대체 재료로서 산업부산물에 대한 관심이 높아졌으며, 특히 최근 경제성, 치수안정성 및 신뢰성이 우수한 고품질의 콘크리트 개발이 크게 요구되고 있는데 이를 증명하기 위한 실험을 수행한 결과는 다음과 같다. (1) 고로슬래그 미분말과 플라이애쉬 같은 혼화재를 혼합하여 사용할 경우 유동성이 개선되고 수화열 감소하는 효과가 있다. (2) 고로슬래그 미분말과 플라이애쉬 같은 혼화재의 량을 증가하면 장기강도 증진되고 건조수축이 감소한다, (3) 고로슬래그 미분말과 플라이애쉬 같은 혼화재의 혼입량을 증가시키면 수밀성 및 내구성 향상 등에 효과가 있는 것으로 나타나고 있다. 본 연구에서는 고로슬래그 미분말 및 플라이애쉬의 각각의 치환율과 혼입에 따른 콘크리트의 공학적 특성 및 혼입량의 임계치를 추정하고 현장 적용가능성을 검증하는데 목적이 있다.

Fe계 벌크 비정질 합금을 이용한 레이저 용접층의 파손 거동 (Failure Behavior of Laser Cladding Layer used by Fe-based Bulk Metallic Glass)

  • 임병철;김대환;박상흡
    • 한국산학기술학회논문지
    • /
    • 제16권9호
    • /
    • pp.5743-5747
    • /
    • 2015
  • 본 연구에서는 가스아토마이저로 제조된 Fe계 벌크비정질 합금 분말을 이용하여 제작된 시험편에 레이저 육성용접을 하였고, 인장시험과 경도시험의 실시 및 미세조직을 관찰하여 육성용접 층의 파괴거동을 분석하였다. 인장시험 결과 육성용접층은 탄성변형 후 바로 파괴가 일어났고, 모재는 소성변형 후 파괴가 일어났다. 육성용접층과 모재의 실제 최대인장강도는 각 각 955.9Mpa과 220.4Mpa이다. 육성용접층과 모재의 미소경도는 각 각 $485.5{\pm}21$$197.4{\pm}14$ 이었고, 육성용접층은 매우 높은 경도를 갖는다. 모재는 조대한 결정립을 갖는 미세 구조를 나타내었다. 인장시험 후 파단면을 고분해능주사전자현미경으로 관찰한 결과 육성용접층과 모재의 파괴형태는 각각 취성파괴와 연성파괴를 나타내었다.