• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.169-173
• /
• 2003

We demonstrated the applicability of dry film photoresist (DFR) in photolithography process for fine pitch solder bumping on the polytetrafluoroethylene (PTFE/Teflon) printed circuit board (PCB). The copper lines were formed with $100\;{\mu}m$ width and $18\;{\mu}m$ thickness on the PTFE test board, and varying the gaps between two copper lines in a range of $100-200\;{\mu}m$. The DFRs of $15\;{\mu}m$ thickness were laminated by hot roll laminator, by varying laminating temperature from $100^{\circ}C\;to\;150^{\circ}C$ and laminating speed. We found the optimum process of DFR lamination on PTFE PCB and accomplished the formation of indium solder bumps. The optimum lamination condition was temperature of $150^{\circ}C$ and speed of about 0.63 cm/s. And the smallest size of indium solder bump was diameter of $50\;{\mu}m$ with pitch of $100\;{\mu}m$.

• Journal of Ecology and Environment
• /
• 제37권1호
• /
• pp.21-29
• /
• 2014

Robinia pseudoacacia has become invasively naturalized in Japan. We investigated the role of sexual reproduction in the development of R. pseudoacacia riparian forests along the Chikumagawa River in Japan, by using five chloroplast (cpSSR) and seven nuclear (nSSR) markers. We identified eight chloroplast haplotypes and 147 nuclear genotypes from 619 R. pseudoacacia trees sampled in three plots (Plots A, B, and C) and along two line transects (Lines D and E). CpSSR analyses showed that multiple maternal lines were distributed along the river, and that some haplotypes from different populations overlapped. In addition, while Plots A and B were separated by a short distance, only these two plots exhibited genetic differentiation in the haplotypes. In the nSSR analysis, all pairwise $F_{ST}$ values among the three plots were significantly different from zero. Kinship analysis based on nSSR markers revealed that kinship connected many individuals to another individual from the same plot. These results indicate that seed dispersal near to mother trees contributes to the fine-scale genetic structure of R. pseudoacacia riparian forests. Our results indicate that sexual reproduction, in addition to asexual reproduction, is a major contributor to the fine-scale formation of R. pseudoacacia forests.

• Entomological Research
• /
• 제48권5호
• /
• pp.429-438
• /
• 2018

Fine structural characteristics of the cardiac muscle and its sarcomere organization in the black widow spider, Latrodectus mactans were examined using transmission electron microscopy. The arrangement of cardiac muscle fibers was quite similar to that of skeletal muscle fibers, but they branched off at the ends and formed multiple connections with adjacent cells. Each cell contained multiple myofibrils and an extensive dyadic sarcotubular system consisting of sarcoplasmic reticulum and T-tubules. Thin and thick myofilaments were highly organized in regular repetitive arrays and formed contractile sarcomeres. Each repeating band unit of the sarcomere had three apparent striations, but the H-zone and M-lines were not prominent. Myofilaments were arranged into distinct sarcomeres defined by adjacent Z-lines with relatively short lengths of $2.0{\mu}m$ to $3.3{\mu}m$. Cross sections of the A-band showed hexagon-like arrangement of thick filaments, but the orbit of thin filaments around each thick filament was different from that seen in other vertebrates. Although each thick filament was surrounded by 12 thin filaments, the filament ratio of thin and thick myofilaments varied from 3:1 to 5:1 because thin filaments were shared by adjacent thick filaments.

• 천문학회보
• /
• 제42권2호
• /
• pp.81.1-81.1
• /
• 2017

L1251B is an excellent example of a small group of pre- and protostellar objects in low-mass star-forming region. Previous interferometer data with a high angular resolution resolved the outflows associated with L1251B into a few components. To understand the physical conditions of the protostellar outflows in L1251B, we mapped this region spectroscopically with Spitzer/IRS and obtained spectral line data from Herschel/PACS. Spitzer/IRS provides the S(0)-S(7) pure rotational lines of H2 as well as fine-structure emissions produced in shocks such as S, [Si II], and [Fe II] and it is a powerful tool for studying shocked interstellar gas. In addition, [O I] lines observed with Herschel/PACS are described well by J-type shock models expected in the outflows from protostars. We will present an analysis of the L1251B protostellar outflow in the H2 pure rotational lines and fine-structure emissions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.107-108
• /
• 2007

Overhead transmission lines are completely exposed to the environment. This causes faults in transmission lines due to natural environmental conditions. In some cases, transmission towers are damaged by typhoons and snow, as well as sleet on the transmission lines. It takes a lot of time to repair the damaged towers. For emergency restoration purposes, steel poles are installed to temporarily supply power. Before 2003, emergency restoration steel poles were made of angled steel, which required a large number of beams, bolts, etc. In addition, the foundation of the steel pole and ground wire was constructed using excavation and burial methods, therefore it required a lot of manpower and time to construct temporary transmission lines. In September 2003, typhoon Maemi, whose maximum wind speed was 60m/s, hit Korea. 'Maemi' destroyed transmission lines in the Busan and Geojea area, causing long blackouts. To reduce the recovery time to the damaged transmission lines, self-build based emergency towers were developed. self-build based emergency towers reduced recovery time from 24 hours to 4 hours or less. However, the self-build based emergency tower had no arms, so the temporary transmission lines could only be constructed without curves in line routes. In this paper, solving these self-build based emergency tower limitations, using insulated arms(designed for use with the self-build based emergency tower), shall be explained.

• 한국인쇄학회지
• /
• 제11권1호
• /
• pp.1-16
• /
• 1993

In screen printing process, printers are stretching screen meshs of an angle of 45deg. This angle need much more screen mesh’s quantity of 15% than 22.5deg. To search mesh angles have affect on reproducting fine line pattern, we modeled the expecting image according on screen angles change and reconfirmed it’s useful and valid from experimentation.

• 복식문화연구
• /
• 제28권5호
• /
• pp.607-620
• /
• 2020

The aim of this study is to define the new expressive techniques for multicolored clamp resist (hyuphill) dyeing, based on empirical verification on relics that are estimated to be dyed by the exchange of more than two wood blocks: a previously undiscovered technique. Clamp resist dyeing (assumed to be made by exchanging wood blocks) have uneven resist printing lines or cloudy gradation. These are reproduced as follows: first, they have uneven contour lines, particularly with the color blue. It is possible to exchange wood blocks separately on patterns with uneven resist printing lines, and it has been verified that the exchange of wood blocks makes these irregular resist printing lines. It has also been verified that exchanging the wood blocks according to the gradation (to emphasize the cubic effect on the patterns) yields clamp resist dyeing with no resist printing lines but with cloudy gradations that have accented borders. This study provides basic information that enables methods of multicolored clamp resist dyeing through wood block exchange to be deduced (something that has not been attempted for a long time). Thus, the revival of the modern Korean dyeing culture based on the conservation and perseverance of the traditional dyeing techniques can be achieved.

• International Journal of Contents
• /
• 제3권4호
• /
• pp.15-21
• /
• 2007

Image morphing deals with the metamorphosis of one image into another. The field morphing depends on the manual work for most of the process, where a user has to designate the control lines. It takes time and requires skills to have fine quality results. It is an object of this paper to propose a method capable of realizing the semi-automation of field morphing using adaptive vertex correspondence based on image segmentation. The adaptive vertex correspondence process efficiently generates a pair of control lines by adaptively selecting reference partial contours based on the number of vertices that are included in the partial contour of the source morphing object and in the partial contour of the destination morphing object, in the pair of the partial contour designated by external control points through user input. The proposed method generates visually fluid morphs and warps with an easy-to-use interface. According to the proposed method, a user can shorten the time to set control lines and even an unskilled user can obtain natural morphing results as he or she designates a small number of external control points.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2011년도 제43차 동계학술발표논문집 19권1호
• /
• pp.59-62
• /
• 2011

A new method is proposed for stereo vision where solution to disparity map is presented in terms of Line constraint and Reliability space -- the first constraint proposes a progressive framework for stereo matching which applies local area pixel-values from corresponding lines in the left and right image pairs. The second states that reliability space based on corresponding points records the disparity and then we are able to apply the median filter in order to reduce the noises which occur in the process. A coarse to fine result is presented after the median filtering, which improves the final result qualitatively. Experiment is evaluated by rectified stereo matching images pairs from Middlebury datasets and has proved that those two adopted strategies yield good matching quantitative results in terms of fast running speed.

• Journal of Ginseng Research
• /
• 제26권3호
• /
• pp.159-164
• /
• 2002

고려인삼의 적변내성 계통을 선발하기 위하여 39계통을 포장시험에 공시하여 적변지수가 낮아 적변에 강한 건전계통(LR) 7계통과 적변지수가 높아 적변에 약한 적변계통(HRL)7계통을 선발하였다. 적변내성 인삼 선발을 위한 지표성분으로 무기성분의 가능성을 검토하기 위하여 I(건전계통군의 건전삼과 적변계통군의적변삼 비교), II(건전계통군의 건전삼과 적변삼 비교), III(적변계통군의 건전삼과 적변삼비교), IV(적변삼의 건전계통군과 적변계통군 비교), V(건전삼의 건전계통군과 적변계통군 비교) 5개 조합으로 구성하여 부위별로 무기성분 함량을 비교하였다. 계통군 및 적변지수별 무기성분 함량이 중심주 및 피층조직에서는 유의성이 없었으며, 지세근 조직에서도 일정한 경향이 없었다. 각 계통군내 비교에서 적변인삼은 건전인삼보다 표피조직에서 Fe, Na및 Al함량이 높았다. 표피조직에서 적변계통군(HRL)은 건전계통군(LRL)보다 적변삼이나 건전삼 시료 모두에서 Fe, Al함량이 높아 적변내성 계통 선발 지표성분으로 활용 가능성을 제시한다.