• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.53-61
• /
• 2006

In this paper, we propose a novel method for 3D reconstruction of an indoor scene using a multi-view camera. Until now, numerous disparity estimation algorithms have been developed with their own pros and cons. Thus, we may be given various sorts of depth images. In this paper, we deal with the generation of a 3D surface using several 3D point clouds acquired from a generic multi-view camera. Firstly, a 3D point cloud is estimated based on spatio-temporal property of several 3D point clouds. Secondly, the evaluated 3D point clouds, acquired from two viewpoints, are projected onto the same image plane to find correspondences, and registration is conducted through minimizing errors. Finally, a surface is created by fine-tuning 3D coordinates of point clouds, acquired from several viewpoints. The proposed method reduces the computational complexity by searching for corresponding points in 2D image plane, and is carried out effectively even if the precision of 3D point cloud is relatively low by exploiting the correlation with the neighborhood. Furthermore, it is possible to reconstruct an indoor environment by depth and color images on several position by using the multi-view camera. The reconstructed model can be adopted for interaction with as well as navigation in a virtual environment, and Mediated Reality (MR) applications.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.40-52
• /
• 1992

The use of meteorological information is essential in the industrial society. More specialized weather services are required to perform better industrial activities including forestry. A topoclimatological technique, in this study, which makes use of empirical relationships between the topography and the weather in Cheju Island was applied to produce reasonable estimates of monthly air temperatures over remote land area where routine observations are rare. Altitude values of the 250m grid points were first read from a 1 : 25000 topographic map. The mean altitude and other valuable topographical variables were then determined for each $1km^2$ land area. Daily minimum, maximum and mean air temperature data were collected from 19 points in Cheju Island from June 1987 to September 1988. The data were analyzed and grouped into 36 sets by type of air temperature and by month. Each of data set was regressed to the topographical variables to delineate empirical relationships between the local air temperature and the site topography. The total of 36 regression equations were finally selected and the equations were used to calculate the monthly air temperature for each $1km^2$ land area. The outputs were presented in a fine-mesh grid map with a 6-level contour capability.

• Ecology and Resilient Infrastructure
• /
• v.1 no.1
• /
• pp.39-48
• /
• 2014

In order to establish fundamental data for stream restoration and environmental flow, we investigated optimal ecological flowrate (OEF) and riverine health condition in the Chogang Stream, a tributary to Geum River, Korea. The number of fish individuals sampled in this period were 4,669 in 36 species of 9 families. The most abundant species was Korean chub (Zacco koreanus, 34.0%) followed by pale chub (Z. platypus, 22.6%) and Korean shinner (Coreoleuciscus splendidus, 13.3%). Index of biological integrity (IBI) and qualitative habitat evaluation index (QHEI) values decreased from upstream to downstream along the stream. The estimated IBI value ranged from 27.9 to 38.6 with average 32.2 out of 50, rendering the site ecologically fair to good health conditions. OEF was estimated by the physical habitat simulation system (PHABSIM) using the habitat suitability indexes (HSI) of three fish species Z. koreanus, C. splendidus and Pseudopungtungia nigra selected as indicator species. In Z. koreanus, HSI for flow velocity and water depth were estimated at 0.1 to 0.4 m/s and 0.2 to 0.4 m, respectively. In P. nigra, HSI for flow velocity, water depth and substrate size were estimated at 0.2 to 0.5 m/s and 0.4 to 0.6 m and fine gravel to cobbles, respectively. OEF values increasing from up to downstream was found to increase, weighted usable area (WUA) values increased accordingly.

• Clean Technology
• /
• v.24 no.3
• /
• pp.239-248
• /
• 2018

In this study, pervaporation experiments of water, ethanol and IPA (Isopropyl alcohol) single components and water/ethanol, water/IPA mixtures were carried out using zeolite 4A membranes developed by Fine Tech Co. Ltd. Those membranes were fabricated by hydrothermal synthesis (growth in hydrothermal condition) after uniformly dispersing the zeolite seeds on the tubular alumina supports. They have a pore size of about $4{\AA}$ by ion exchange of $Na^+$ to the LTA structure with Si/Al ratio of 1.0, and shows strong hydrophilic property. Physical characteristics of prepared membranes were evaluated by using SEM (surface morphology), porosimetry (macro- or meso- pore analysis), BET (micropore analysis), and load tester (compressive strength). Pervaporation experiments with various temperature and concentration conditions confirmed that the zeolite 4A membrane can selectively separate water from ethanol and IPA. Water/ethanol separation factor was over 3,000 and water/IPA separation factor was over 1,500 (50 : 50 wt%, initial feed concentration). Pervaporation behaviors of single components and binary mixtures were predicted using ACM (activity coefficient model), GMS (generalized Maxwell Stefan) model and DGM (Dusty Gas Model). The adsorption and diffusion coefficients of the zeolite top layer were obtained by parameter estimation using GA (Genetic Algorithm, stochastic optimization method). All the calculations were carried out using MATLAB 2018a version.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.53-64
• /
• 2013

Resistivity monitoring is based on the fact that a change in the porosity leads to the changes in water content and fine particles, which alter the electrical resistivity. At every embankment dam, internal erosion always occurs as time passes. The internal erosion generally develops into piping over a long time by backward erosion and concentrated leak, and finally leads to dam failure. Resistivity is known to be very sensitive to the changes in porosity in embankment dams. Thus resistivity monitoring is a reasonable method to find out the leakage zone. However, resistivity is strongly influenced by seasonal variation of temperature, TDS of reservoir water and water level. In this paper. we first installed electrodes permanently at the center of the crest. The electrical resistivity monitoring data was acquired every 6 hours from Apr. 3, 2011 to July. 31, 2012. To analyze the characteristics of monitoring data, each resistivity data was calculated from up to 2,950 data sets. The result indicated a seasonal resistivity variation due to related temperature. Finally, a quantitative method to estimate porosities of the embankment dam from the resistivity monitoring data was analyzed. The applicability and reliability were verified and the importance of electrical resistivity monitoring for obtaining reliable result was emphasized.

• Particle and aerosol research
• /
• v.16 no.2
• /
• pp.49-59
• /
• 2020

Various devices have been developed to the measurement of particulate matter pollutants, and Optical Particle Counter (OPC) that can be easily and quickly measured is widely used lately. The measured value by OPC is converted to weight concentration using the correction factor (CF). The calculation of CF is very important to improve the reliability and accuracy of OPC. In this study, the CF calculation study of light scattering laser photometer (model 8533, TSI) was carried out to measure in the atmospheric environment using 2 gravimetric devices and 3 light scattering laser photometer devices. Regression analysis and Tukey tests were used to significance the test of measurement devices. Measurements were carried out twice. There was a comparative analysis of measurement data between light scattering laser photometer and gravimetric devices in 1st measurement, and then the Evaluation of PM2.5 concentration corrected by CF performed in 2nd measurement. As a result of the significance analysis between light scattering laser photometer and gravimetric devices, the correlation between the same method was high, but the correlation between different methods was low. CF was calculated as 0.4258 based on the measurement results, and it is a similar level to previous studies at home and abroad. It is expected that these results can be used as basic data in the future study for air quality measurement research using light scattering laser photometer. Also, in order to improve the accuracy of the measurement techniques and the development of technology in the atmospheric environment, CF calculation research should be conducted continuously.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.151-160
• /
• 2006

In this study, threshold runoff which is a hydrologic component of flash flood guidance(FFG) is estimated by using Manning's bankfull flow and Geomorphoclimatic Instantaneous Unit Hydrograph(GcIUH) methods on Han River watershed. Geographic Information System(GIS) and 3' Digital Elevation Model database have been used to prepare the basin parameters of a very fine drainage area($1.02\~56.41km^2$), stream length and stream slope for threshold runoff computation. Also, cross-sectional data of basin and stream channel are collected for a statistical analysis of regional regression relationships and then those are used to estimate the stream parameters. The estimated threshold runoff values are ranged from 2 mm/h to 14 mm/6hr on Han River headwater basin with the 1-hour duration values are$97\%$ up to 8mm and the 6-hour values are $98\%$ up to 14mm. The sensitivity analysis shows that threshold runoff is more variative to the stream channel cross-sectional factors such as a stream slope, top width and friction slope than the drainage area. In comparisons between the computed threshold runoffs on this study area and the three other regions in the United States, the computed results on Han River watershed are reasonable.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.543-551
• /
• 2015

Quick-hardening track (QHT) is a construction method which is used to change from old ballast track to concrete track. Sufficient time for construction is important, as the construction should be done during operational breaks at night. Most of the time is spent on exchanging the ballast layer. If it is possible to apply the ballast non-exchange type of quick-hardening track, it would be more effective to reduce the construction time and costs. In this paper, pouring materials with high permeability are suggested and a construction method involving a layer separation pouring process considering the void condition is introduced in order to develop ballast non-exchange type of QHT. The separate pouring method can secure the required strength because optimized materials are poured into the upper layer and the lower layer for each void ratio condition. To ensure this process, a rheology analysis was conducted on the design of the pouring materials according to aggregate size, the aggregate distribution, the void ratio, the void size, the tortuosity and the permeability. A polymer series was used as the pouring material of the lower layer to secure the void filling capacity and for adhesion to the fine-grained layer. In addition, magnesium-phosphate ceramic (MPC) was used as the pouring material of the upper layer to secure the void-filling capacity and for adhesion of the coarse-grained layer. As a result of a mechanics test of the materials, satisfactory performance corresponding to existing quick-hardening track was noted.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.3
• /
• pp.71-87
• /
• 2018

As part of further study on Gwangseungri coastal deposits which occurred at 10 ~ 15m above sea level and was analyzed as palaeo-coastal flood-type sediments, six burial ages of six additional samples from the two cross sections (KST1 and, KST2) near to the points of the past study were estimated and the geochemical analysis was performed. Further investigation on the cross section KST1 revealed a reversal of the burial age at the bottom of the section which was identified as palaeo-flooding sediments and supposed to have been buried about 350 years ago. At the lower part of the KST1, the burial age of the sediment layer was estimated to be 3,800 years. The lower part of KST2 sediments was identified as sediments that was formed about 6,600 years ago and about 20,000 years ago. Considering the inclination of the sediment layers, the coastal flooding sedimentsreported to have formed 700 years ago in the previousstudy are located at the top and the KST1 section analyzed in thisstudy seemed to be connected to the lower part. The chemical analysis showed that the relationship between these layers was not continuous but had a discontinuous characteristic influenced by a specific event, and the chemical composition also showed a rapid change. If we judge these together, the lowest part of Gwangseungrisediment layerseemed to have formed during the last glacial period but it was hard to find its origins clearly. On top of this layer, a fine sediment layer containing gravels was also formed.Itseemed thatsedimentation did not occur continuously, but was affected by temporary events in such a way that after a sediment layer was formed, it stopped. Since then, a coastal flooding event occurred about 700 years ago, and part of flooded sediments accumulated in the rear slope. After that, when a flood layer including additional granular materials about 350 years ago was formed, sedimentation along the slope seemed to have occurred.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.567-575
• /
• 2021

Residents in Dangjin, South Chungcheong Province, in which large-scale emissions facilities such as coal-fired power plants and steel mills are concentrated, are very much concerned about their health despite the local government's aggressive efforts to improve air quality and reduce greenhouse gases. To understand the impact of coal-fired power plants and external factors on local air pollution, the origins of local pollutants were investigated using stable carbon isotopes that are generally used as tracers of the provenance of fine or ultrafine dust. The origins of the pollutants were analyzed with the data library, built using the seasonally measured data for the two separate locations selected considering the distance from the coal-fired power plant and the analysis of previous studies, and with the back trajectory analysis. As a result of analyzing stable isotope ratios, the tendency of high concentration was found in the order of winter > spring > fall > summer. According to the data matching with the library, the mobile pollutants and open-air incineration had a relatively higher impact on the local air pollution. It is believed that this study, as a pilot study, should focus on securing the reliability of the study results through continuous monitoring and data accumulation.