• 한국안광학회지
• /
• 제5권2호
• /
• pp.211-219
• /
• 2000

한국산(韓國産) 파리매아과(亞科)에 속하는 6속(屬) 6종(種)의 복안표면 미세구조를 주사전자현미경과 화상분석시스템을 이용하여 형태학적으로 연구하였다. 개안의 형태는 다양하게 나타났으나, 공통적으로 개안표면직경은 부분에 따라 차이를 보여 내측, 중간부, 외측이 구분되었다. 검정파리매(Trichomachimus scutellaris(Coquillett))에서는 전체적인 개안표면에서 특징적인 미세구조가 관찰되었으며 다른 종과는 형태적인 차이를 보여 종(種) 수준의 분류에 유용하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1095-1100
• /
• 2000

Concrete structure often exhibit cracks due to the combination of material construction and design error. Minor crack can be tolerated depending on exposure condition, but major cracks are aesthetically unpleasant and affect the durability and safety of the structure. All of the reinforced concrete structure have many inevitable cracks for various reason such as drying shrinkage, heat liberation of cement and over loads. Epoxy resin injection widely used for repairing cracks in concrete is too sensitive to high temperature. Besides, the problem in the epoxy resin injection is the difficulty of quality control after execution. Whereas, Ultra Fine Cement is similar in coefficient of thermal expansion and modulus of elasticity to concrete. The objective of the study is to find out that it is possible for Ultra Fine Cement to be used for repairing cracks in reinforced concrete.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.97-103
• /
• 2024

In this paper, the difference between the S-parameter and the characteristic impedance according to the structural change of the fine pitch coaxial socket was analyzed. A pitch of the probe pin was applied to 0.20mm, and ground pins of different conditions were placed on each of the five signal pins. Insertion loss and reflection loss were analyzed for the coaxial socket of normal structure and the two sockets of the proposed structure. In addition, the difference in characteristic impedance was analyzed using time domain reflectometry. Through the analysis, it was confirmed that the characteristic impedance was improved applying the new structures of the socket at the same pitch

• 한국고분자학회지:고분자과학과기술
• /
• 제10권3호
• /
• pp.306-318
• /
• 1999

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.207.2-207
• /
• 2002

• 한국연초학회지
• /
• 제27권2호
• /
• pp.189-194
• /
• 2005

The morphological properties of various structure materials of domestic and foreign reconstituted tobacco products(RTP) were investigated by using the Bauer-McNett classifier and the image analyzer. The results of the fiber classification showed the fraction of the bigger size structure materials was larger in a domestic RTP than that in two foreign RTPs. In case of fine fraction, the domestic RTP had bigger fine fraction than two foreign RTPs. Images of each structure materials showed the scrap in the foreign RTPs kept the original shape which were rare in the domestic RTP fractions. Those results deduced that the raw materials in a foreign RTP process might be treated separately depending on the mechanical and morphological properties, which could reduce the amount of fine generation and increase the efficiency in raw material treatment.

• 한국재료학회지
• /
• 제30권2호
• /
• pp.57-60
• /
• 2020

Titanium aluminides have attracted special interest as light-weight/high-temperature materials for structural applications. The major problem limiting practical use of these compounds is their poor ductility and formability. The powder metallurgy processing route has been an attractive alternative for such materials. A mixture of Ti and Al elemental powders was fabricated to a mechanical alloying process. The processed powder was hot pressed in a vacuum, and a fully densified compact with ultra-fine grain structure consisting of Ti₃Al intermetallic compound was obtained. During the compressive deformation of the compact at 1173 K, typical dynamic recrystallization (DR), which introduces a certain extent of grain refinement, was observed. The compact had high density and consisted of an ultra-fine equiaxial grain structure. Average grain diameter was 1.5 ㎛. Typical TEM micrographs depicting the internal structure of the specimen deformed to 0.09 true strain are provided, in which it can be seen that many small recrystallized grains having no apparent dislocation structure are generated at grain boundaries where well-developed dislocations with high density are observed in the neighboring grains. The compact showed a large m-value such as 0.44 at 1173 K. Moreover, the grain structure remained equiaxed during deformation at this temperature. Therefore, the compressive deformation of the compact was presumed to progress by superplastic flow, primarily controlled by DR.

• 한국분말재료학회지
• /
• 제17권2호
• /
• pp.101-106
• /
• 2010

In this study, we successfully synthesized a nano-sized lanthanum-modified lead-titanate (PLT) powder with a perovskite structure using a high-energy mechanochemical process (MCP). In addition, the sintering behavior of synthesized PLT nanopowder was investigated and the sintering temperature that can make the full dense PLT specimen decreased to below $1050^{\circ}C$ by using $Bi_2O_3$ powder as sintering agent. The pure PLT phase of perovskite structure was formed after MCP was conducted for 4 h and the average size of the particles was approximately 20 nm. After sintered at 1050 and $1150^{\circ}C$, the relative density of PLT was about 93.84 and 95.78%, respectively. The density of PLT increased with adding $Bi_2O_3$ and the specimen with the relative densitiy over 96% were fabricated below $1050^{\circ}C$ when 2 wt% of $Bi_2O_3$ was added.

• 한국의류산업학회지
• /
• 제14권4호
• /
• pp.635-640
• /
• 2012

In this study, thermoplastic urethane (TPU) coating yarns were prepared at various extruding temperatures. The fine structure and mechanical properties of resultant TPU coating yarns examined by the wide angle X-ray diffractometer (WAXD), differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), and tensile test. TPU coating yarns (prepared at extruding temperatures at $175^{\circ}C$) were confirmed as a stable fine structure that obtained excellent tensile strength and flexibility. The C samples prepared by optimized conditions made by TPU woven floor mat. The structure of the woven mat is $4{\times}4$ basket weave and have laminated with the EVA foam to obtained final TPU woven floor mat products. The resultant TPU woven floor mat was obtained to 1.5MN of tensile strength, 22% of the elongation, and 0.2MN of tear strength. The weight loss abrasion and the resilience by the ball rebound of the TPU-woven floor mat was prior to those of the PVC subsequently, we were able to develop a woven floor mat with TPU coating yarn and produce an eco-friendly high valuable woven floor mat using an interior product.

• 대한수의학회지
• /
• 제32권3호
• /
• pp.295-308
• /
• 1992

In order to study on the Sertoli cell, we attempt have been made to measure the average number of each germ cells per Sertoli cell on the 12 stages of cycle in matured korean Jindo dog. The fine structure of Sertoli cell junctional specialization was studied with electron microscope. The results were summarized as follows; 1. The average number of various germ cells associated with Sertoli cell was 9.77 to 13. 80 through stages of cycle and the total average number was 11.62. 2. Sertoli-Sertoli cell junctional specialization was present in seminiferous epilthelium, and Sertoli-spermatid cell junctional specialization rose from stage 8 spermatid, persisted to step 13 spermatid and then disappeared. The structure of Sedoli-spermatid cell juncticnal specialization was not similar to that of Sertoli cxlls. 3. Just after spermiation, free-surface of Sertoli-spermatid cell junctional specialization was replaced by Sertoli cell cytoplasm with tubulobulbar complex at the neiglaboring region observed. 4. The Sertoli cell process was located within the cytoplasm of late stage spermatids. Some membranes of residual body and spermatid cytoplasm partly disappeared, resulting in opening of the cytoplasm of spermatid into that Sertoli cell. This fact suggested that spermatid cytoplasm was partly eliminated.