• 한국환경보건학회지
• /
• 제34권2호
• /
• pp.137-147
• /
• 2008

This study evaluated the effects of the human activity and outdoor air on concentrations of size-selective particulate matters (PM) by conducting a realtime measurement in classrooms and on roofs at 4 elementary schools, 3 middle schools and 3 high schools in Incheon City. PM concentrations featured repetitive pattern of increasing during break time (including lunch hours) and cleaning time while decreasing during class hours. This trend was more prominent with inhalable PM and PM10 than fine PMs (PM2.5, PM1.0). The indoor/outdoor (I/O) ratio of inhalable PM and PM10 exceeded 1 while that of fine PMs was close to or below 1. The PM2.5 (out)/PM10 (out) ratio stood at 0.59 (${\pm}0.16$) and the PM2.5 (in)/PM10 (in) ratio was 0.29 (${\pm}0.09$), suggesting that occupant activity had a greater effect upon coarse particles (PM10-PM2.5) than upon fine particles (PM2.5, PM1.0). The correlations between the indoor and the outdoor PM concentrations showed a stronger positive correlation for fine particles than that of coarse particles. The linear regression analysis of PM concentrations indoor and outdoor indicated a higher determinant coefficient ($r^2>0.9$), and consistency for fine particles than in case of coarse particles. In conclusion, the results of this study suggest that the indoor coarse particle concentration is more attributed to occupant activity and the indoor fine particle concentration is more influenced by outdoor air pollution.

• 한국전자통신학회논문지
• /
• 제7권1호
• /
• pp.125-134
• /
• 2012

본 연구는 대기중에 포함된 미세먼지(PM10: 지름 $10{\mu}m$ 이하크기의 미세먼지)가 위성신호전송주파수대역에 미치는 영향을 해석하기 위한 것으로, 미세먼지 농도별 위성신호감쇠 정도를 해석을 위하여 $50{\mu}g/m^3$이하, $100{\mu}g/m^3$이하, $200{\mu}g/m^3$, $400{\mu}g/m^3$이하, $800{\mu}g/m^3$이하, $1,600{\mu}g/m^3$이하, $3,200{\mu}g/m^3$이하로 총 7단계로 분류하여 해당 농도가 위성신호에 미치는 영향을 정량화 하는 연구이다.

• 한국분말재료학회지
• /
• 제10권1호
• /
• pp.57-62
• /
• 2003

The effect of bedding on the microstructure of $Si_3N_4$ added with ultra-fine SiC was investigated. The bedding and the addition of ultra-fine SiC effectively inhibited grain growth of $Si_3N_4$ matrix grain. The microstructures of the specimens sintered with bedding powder consisted of fine-grains as compared with the specimens sintered without bedding powder. In addition, the grain size and the difference of grain size between the specimens sintered with bedding and without bedding was reduced with increasing SiC content. Some ultra-fine SiC particles were trapped in the $Si_3N_4$ grains growed. The number of SiC particles trapped in the $Si_3N_4$ grains increased with increasing the grain growth. When ultra-fine SiC particles were added in the $Si_3N_4$ ceramics, the strength was improved but the toughness was decreased, which was considered to be resulted from the decrease of the grain size.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.444-445
• /
• 2006

Flying trajectories of fine particles within a size range of $10{\sim}60{\mu}m$ were studied during centrifugal atomizing processes. A FORTRAN program was written by using increment method. Calculation results revealed that the drag force might reach very high value of 522-7800 g for fine powder of $10{\sim}60{\mu}m$. Flying distance in horizontal direction could be shortened if the particles fly obliquely due to the huge drug force. On the other hand, very fine powder could be projected to far distances when the atmosphere flow velocity is much stronger. Fortunately such particles could be contracted within a cylinder closed to the atomizer when the atmosphere flow was weaken or retained in a limited diameter.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.989-994
• /
• 1994

This study aims at finding the closest packings of regular shape particles such as sphere, circle rod and hexagonal rod type. As the ratio of particle size to container lowered to less than 1/10, the wall effect decreased gradually. The tap density of spherical particles with almost orthorhombic arrangement was 59.5%, while those of circle rod and hexagonal rod type particles were 63.5% and 63.0% respectively. And it was decreased with increasing the aspect ratio of regular particles. The tap density of binary mixtures was larger than that corresponding to the monosized particles packing by about 15%. The tap density of ternary mixtures was larger than that of corresponding to the packing of binary mixtures by about 9%. This work employed the binary mixture of 60% coarse particles and 40% fine particles with size ratio of 1.0 to 1/10 and the ternary mixture of 60% coarse particles, 20% medium and 20% fine particles with size ratio of 1:1/10:1/400 respectively.

• 한국게임학회 논문지
• /
• 제16권6호
• /
• pp.101-110
• /
• 2016

현재 미세먼지에 대한 화재가 점점 사람들의 시선을 끌고 있다. 미세먼지는 눈으로 볼 수 없는 직경이 $2.5{\mu}m$(마이크로미터)인 먼지이며 폐 속 깊숙이 침투 할 수 있어 건강에 많은 피해를 준다. 사람들은 예방법을 알면서도 실행에 옮기지 않는 것은 미세먼지 위험성의 인지도가 낮기 때문이다. 본 논문은 어린이 대상으로 미세먼지의 인위적 원인과 자연적 원인의 생성 요소와 미세먼지 예방요소에 대한 인지도를 향상시키기 위하여 <우마이 탈출>보드게임 개발하여 다수의 어린에게 테스트를 진행하여 <우마이 탈출>보드게임의 교육적 효과에 대한 연구를 진행하였다.

• Journal of Magnetics
• /
• 제4권3호
• /
• pp.92-97
• /
• 1999

A relationship between microstructure and ferromagnetic resonance of Co/Ag multilayers has been studied in as-deposited and annealed multilayers iwth ultrathin (dCo < 1 nm) Co layers. Depending on the nominal thickness of Co Co/Ag multilayers represent a system of fine magnetic particles (dCo < 0.4 nm) or discontionuous layered structure (dCo/0.5 nm). FMR data has been interpreted in the framework of a odel of interacting fine particles exhibiting superparamagnetic behavior. Changes in the FMR spectra upon annealing have been attributed to the growth of the Co particles and to a transition from the fcc to hcp atomic structure of the highly (111) textured Co particles.

• 한국대기환경학회지
• /
• 제23권1호
• /
• pp.132-140
• /
• 2007

Concentrations of atmospheric fine particles in Chungnam were measured at 7 sampling sites during 2005. The daily average concentrations of PM 10, PM2.5, and PM1 ranged from 14.9 to $136.5{\mu}g/m^3$, 8.2 to $113.2{\mu}g/m^3$, and 5.7 to $107.5{\mu}g/m^3$, respectively, and the highest levels were observed at Yeongi site. The lowest concentrations for the all size fractions of particulate were observed at Taean located at the west end of the peninsula. The daily average PM10 concentrations were below the current National Standard at all sites, while the daily average PM2.5 concentrations frequently exceeded the US Standard at Cheonan, Dangjin, Boryeong, and Yeongi sites. The frequencies of PM2.5 concentrations exceeding the US standard at Cheonan, Dangjin, Boryeong, and Yeongi were 10.8%, 6.7%, 6.7%, and 26.7%, respectively. In addition, $68{\sim}80%$ of PM10 was in the PM2.5 fraction indicating that fine particles were the major component of atmospheric particles in Chungnam.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.34-41
• /
• 2004

A new method to fabricate the fine magnetic abrasives by using mechanical alloying is proposed. The mechanical alloying process is a solid powder process where the powder particles are subjected to high energetic impact by the balls in a vial. As the powder particles in the vial are continuously impacted by the balls, cold welding between particles and fracturing of the particles take place repeatedly during the ball milling process using a planetary mill. After the manufacturing process, fine magnetic abrasives which the guest abrasive particles c lung to the base metal matrix without bonding material can be obtained. The shape of the newly fabricated fine magnetic abrasives was investigated using SEM and its polishing performance was verified by experiment. It is very helpful to finishing the injection mold steel in final polishing stage. The areal ms surface roughness of the workpiece after several polishing processes has decreased to a few nanometer scales.

• Journal of Korean Society for Atmospheric Environment
• /
• 제24권E1호
• /
• pp.24-31
• /
• 2008

In this study, a new PM (particulate matter) sampler was developed and fabricated to collect fine particles in the atmosphere, and laboratory and field tests were carried out to evaluate the performance of the sampler. The PM sampler, which was based on impingers, employed an aerosol condensation system as a PM magnifier to improve its collection efficiencies. Sodium chloride, ammonium sulfate and ammonium nitrate aerosols were used as test particles, because these components are rich in ambient aerosols. As a result, it was found that the collection efficiency of the novel PM sampler was very high. Thus, it is believed that the PM sampler is an effective device for sampling fine particles. In addition, it was demonstrated that this work could contribute to the collection or removal of fine particles and be applied to the semicontinuous sampling of ambient aerosols for chemical composition analysis.