• 한국수산과학회지
• /
• 제32권3호
• /
• pp.345-352
• /
• 1999

이 연구는 제주도 함덕연안에 분포하는 구멍연잎성게의 생태 및 번식생활사에 관한 연구보고서이다. 시료는 북제주군 함덕에서 SCUBA를 통하여 채집하였으며, 실험실로 옮긴 뒤, 크기 및 생식소에 대한 분석을 수행하였다. 구멍연잎성게의 크기는 각장 80$\~$200mm 이었으며, 각장 140$\~$170mm 의 개체가 주를 이루었다 (N=129). 구멍연잎성게는 세립질 또는 미립질 ($125\~250\mu$m ($2\~3\phi$))의 사질에 주로 분포하였으며, 퇴적물내의 유기물을 섭취하는 퇴적물식자로 확인되었다. 성숙한 암컷의 생식소는 보라색을 띠며, 수컷은 짙은 노란색을 띤다. 암, 수 모두 11$\~$3월 사이 휴지기를 거쳐 6월경에 성숙하며, 주 방란 방정은 7$\~$10월 사이에 이루어진 것으로 추정된다. 암컷의 경우 성숙한 난은 그 직경이 평균 381$\mu$m이었다.

• 한국환경보건학회지
• /
• 제37권4호
• /
• pp.267-278
• /
• 2011

Objectives: A great number of hazardous agents can be emitted from various types of art-creation in a fine arts college, but little data on exposure assessment has been published. A variety of processes encompassing toxic or non-toxic materials, tools, and components are involved in a sculptor work at a fine art college. The aim of this study was to assess exposure levels to particulates and noise during sculpture classes in a college of fine arts. Methods: Students in sculpture classes participated in this study. Mass, number, and surface area concentrations of particulates, noise level, temperature and relative humidity were monitored by both personal and area sampling during the tasks of metal, wood, and stone sculpting. Results: The number and surface concentration of particulates was the highest in the task of wood sculpting, followed by metal and stone work. The mass concentration of particulates was the highest in stone sculpting (personal GM 3.0 mg/$m^3$, GSD 3.0), followed by wood (personal GM 1.5 mg/$m^3$, GSD 1.8) and metal work (personal GM 0.95 mg/$m^3$, GSD 1.51) in that order. Occupational exposure limits (OEL) for particulates depends on the type of particulate. For wood dust, 86% (six subjects) of the personal samples and all area samples exceeded the Korean OEL for wood dust (1 mg/$m^3$), while 20% (two subjects) among stone sculpting students were exposed above the Korean OEL (10 mg/$m^3$). In contrast, metal sculpting did not exceed the OEL (5 mg/$m^3$). For noise level, metal sculpting students (Leq 95.1 dB(A) in the morning, 85.3 dB(A) in the afternoon) were exposed the most, followed by stone sculpting (88.3 dB(A)), and wood sculpting (84.8 dB(A)) in that order. Compared with the 90 dB(A) of the Korean OEL and 85 dB(A) of the American Conference of Governmental Industrial Hygienists' threshold limit value (ACGIH-TLV) for noise, 100% of the subjects (five subjects) and area samples during metal sculpting in the morning session exceeded both OELs, but only three subjects (60%) exceeded the ACGIH-TLV in the afternoon session. For stone sculpting, 50% (one subject) and 100% (two subjects) exceeded the Korean OEL and ACGIH-TLV, respectively, but the area sample did not exceed either OEL. During wood sculpting, two subjects (40%) exceeded ACGIH TLV. Conclusions: This work evaluated the sculptors' exposure to particulate matter and noise in fine art college, and revealed a poor working environment for the participating students. Effective measures should be supplemented by the administration of colleges.

• 대한환경공학회지
• /
• 제30권2호
• /
• pp.190-198
• /
• 2008

본 연구에서는 주유소 등의 지하 유류저장탱크나 파이프의 제한된 수명으로 인해 발생할 수 있는 가솔린의 누출에 의해 MTBE로 토양이 오염되었을 경우를 가정하여, 칼럼실험을 수행하고, CXTFIT 기법을 이용하여 토양 내 MTBE의 이동특성을 살펴 보았다. 칼럼실험에서는 토성, 수분함량, 유기물함량, 주입유속을 달리하여, 주입액과 유출액의 MTBE의 농도 측정값을 비교하고, CXTFIT기법을 이용하여 two-site 비평형 흡착모델에 사용된 매개변수(D, R, $\beta$, $\omega$)를 구하였다. 이들 매개변수와 파과곡선을 이용하여 MTBE의 토양 내 이동특성을 살펴보았다. 토양 내 미세입자와 유기물함량이 많을수록 이류에 의한 영향이 감소하는 것으로 나타났으며, 수분함량과 유속의 증가는 이류에 의한 MTBE의 이동을 더욱 가속시키는 것으로 나타났다.

• 환경위생공학
• /
• 제16권4호
• /
• pp.21-30
• /
• 2001

Vehicles, especially diesel-using, are a major source of airborne particulate matter(PM), nitrogen dioxide($NO_2$) and so on in metropolitan cities such as Seoul. Therefore workers, who are mainly merchants, near roadside may be highly exposed to air pollutants from exhausted emissions of vehicles. This means that occupational type and location can affect the workers＇health by exposure to outdoor pollutions of ambient as well as indoor pollutions of working condition, respectively. In this study, we simultaneously measured the PM3.5 and $NO_2$concentrations in indoor and outdoor of shoes repair shops in Seoul, which were generally located at roadside in Korea. Shoes repairmen were highly exposed to PM3.5 and $NO_2$ both indoor and outdoor of repair shops comparing with other sub-population groups. High exposure to air pollutants for shoes repairmen was considered to be outdoor source from exhausted emission of vehicles and indoor source from working condition. The $PM3.5/NO_2$ concentration ratio was $1.17{\pm}$0.59 in roadside, of which ratio was higher 7han ratios of other studies. This result suggested that major air pollutant in Seoul was fine particle. Also, this PM3.5 to $NO_2$ ratio will be used in environmental exposure and risk assessment by estimation of PM3.5 concentration as measuring the only $NO_2$ concentration with small and accurate $NO_2$ passive sampler.

• 한국대기환경학회지
• /
• 제25권3호
• /
• pp.219-236
• /
• 2009

Particle-phase organic tracers (molecular markers) have been shown to be an effective method to assess and quantify the impact of sources of carbonaceous aerosols. These molecular markers have been used in chemical mass balance (CMB) models to apportion primary sources of organic aerosols in regions where the major organic aerosol source categories have been identified. As in the case of all CMB models, all important sources of the tracer compounds must be included in a Molecular Marker CMB (MM-CMB) model or the MMCMB model can be subject to biases. To this end, the application of the MM-CMB models to locations where reasonably accurate emissions inventory of organic aerosols are not available, should be performed with extreme caution. Of great concern is the potential presence of industrial point sources that emit carbonaceous aerosols and have not been well characterized or inventoried. The current study demonstrates that emissions from industrial point sources in the St. Louis, Missouri area can greatly bias molecular marker CMB models if their emissions are not correctly addressed. At a sampling site in the greater St. Louis Area, carbonaceous aerosols from industrial point sources were found to be important source of carbonaceous aerosols during specific time periods in addition to common urban sources (i.e. mobile sources, wood burning, and road dust). Since source profiles for these industrial sources have not been properly characterized, method to identify time periods when point sources are impacting a sampling site, needs to avoid obtaining biases source apportionment results. The use of real time air pollution measurements, along with molecular marker measurements, as a screening tool to identify when point sources are impacting a receptor site is presented.

• 한국대기환경학회지
• /
• 제27권5호
• /
• pp.614-622
• /
• 2011

In this study, a new tunnel ventilation method with a high velocity air curtain flow has been investigated for improving the ventilation exhaust efficiency and removing air pollutants in subway tunnels. At upper or lower position right downstream of a main duct connected with a ventilation opening, air curtain flows were suppled into the main duct where the air flow velocity was in the range of 2~6 m/s. Exhaust efficiency was monitored for both cases with and without air curtain flow for different air velocities, locations and injection angles of the air curtain. Particulate matter concentrations (PM10, PM2.5 and PM1.0) were also checked at both the main duct and ventilation opening before and after supplying air curtain flows. Lower air velocity of the main duct flow, higher air velocity of the air curtain led to higher exhaust efficiency and the air curtain condition of 30..inclined injection toward the main flow showed the maximum exhaust efficiency. The exhaust efficiency of about 24% without the air curtain could be improved to about 34% after using the air curtain flow. PM concentration decreased at the main duct and increased at the ventilation opening after using the air curtain flow. Therefore, the suggested method to use air curtain flows in tunnels will be probably one of the promising tools to reduce air pollutants in subway tunnels.

• 한국환경과학회지
• /
• 제20권1호
• /
• pp.147-153
• /
• 2011

The objectives of this study were to investigate the seasonal characteristics of metallic and ion elements of $PM_{10}$(Particulate matter with aerodynamic diameter ${\leq}10\;{\mu}m$) and the effects of vessels exhaust emission from ships harboring in Busan City. The $PM_{10}$ samples were collected from January 2010 to October 2010 at Dongsam-dong(coastal area), in Busan City. The particulate matters were analyzed for major water soluble ionic components and metals. The ranges of the $PM_{10}$ mass concentrations were from 29.8 ${\mu}g/m^3$ to 47.0 ${\mu}g/m^3$ in Dongsam-dong. The $PM_{10}$ mass concentrations in Dongsam-dong are very similar to Gwangbok-dong during same sampling periods. These results were understood by the effects of the shipping source emitted from ships anchoraging and running. The concentrations of water-soluble ions and metals in the $PM_{10}$ had a level of as high as the order of $SO_4^{2-}$>$NO_3^-$>$Cl^-$ and $NH_4^+$>$Na^+$>$Ca^{2+}$>$K^+$>$Mg^{2+}$, respectively. The correlation coefficients($R^2$) for $SO_4^{2-}/PM_{10}$ and $NH_4^+/PM_{10}$ of were 0.7446 and 0.7784, respectively, and it showed the high correlation with each other.

• 한국환경보건학회지
• /
• 제36권4호
• /
• pp.306-312
• /
• 2010

This field study was performed to evaluate the efficiency of a plasma ion-operated air cleaner in temporal reduction of airborne pollutants emitted from a pig housing facility. In the case of gaseous pollutants, the plasma ion air cleaner was not effective in reducing levels of ammonia, hydrogen sulfide, nitrogen dioxide, or sulfur dioxide (p>0.05). In the case of particulate pollutants, however, the air cleaner was effective in reducing levels of particulate matter ($PM_{2.5}$ and $PM_1$) by 79(${\pm}6.1$) and 78(${\pm}3.0$)%, respectively. Unlike the case of these fine particle fractions, the reduction of total suspended particles (TSP) and $PM_{10}$ following treatment was almost negligible. In the case of biological pollutants, the mean reduction efficiencies for airborne bacteria and fungi were relatively low at 22(${\pm}6.6$) and 25(${\pm}8.7$)%, respectively. Taken together, these results indicate that in terms of air pollutants released from this pig housing facility, the plasma ion air cleaner was primarily effective in reducing levels of $PM_{2.5}$ and $PM_1$.

• 한국환경과학회지
• /
• 제16권10호
• /
• pp.1157-1167
• /
• 2007

In an effort to interpret the characteristics of fine particle concentrations in Busan, time variations of hourly monitored concentrations $PM_{10}$ (Particulate Matter with aerodynamic Diameter ${\le}10\;{\mu}m$) in Busan are analyzed for the period from 2000 to 2005. The characteristics of aerosol second generation formation process is also interpreted qualitatively, by using the statistical analysis of the meteorological variables including temperature, wind speed, and relative humidity. The result shows some significant annual, seasonal, weekly and diurnal variations of $PM_{10}$ concentrations. In particular, seasonal(i.e., spring) variations are governed by frequency of yellow sand events even for the non-yellow sand cases where yellow-sand days are eliminated in our analysis. However, in seasonal variation, summer season predominate lower $PM_{10}$ concentrations due to the frequent precipitation, and weekly and diurnal variations are both found to be reflecting the emission rate from traffic amount. Correlation coefficients between $PM_{10}$ concentration and meterological variables for non-yellow sand days show overall negative correlation with visibility, wind speed, cloud amounts, and relative humidity. However for non-precipitation days, during non-yellow sand period positive correlation are found clearly with relative humidity, suggesting the importance of secondary aerosol formation in Busan that can be achieved by both homogeneous aerosol formation and heterogeneous transformations resulting from hygroscopic aerosol characteristics.

• 한국습지학회지
• /
• 제11권2호
• /
• pp.47-54
• /
• 2009

본 논문은 부산지역의 지역용도별 PM10(입경 10 ${\mu}m$미만의 크기를 가진 먼지입자) 농도의 특성을 고찰하기 위해 수행되었다. 미세먼지는 배출량, 지형조건 그리고 기상인자에 의해 영향을 받는다. 공업지역의 경우, 내륙인 감전동의 PM10농도는 여름철을 제외한 모든 계절에서 해안인 녹산동보다 높았으며, 1차 peak가 가을철과 겨울철에 명확하게 나타났다. 녹지지역인 경우, 내륙인 대저동의 PM10농도는 해안인 동삼동보다 모든 계절에서 높은 농도를 나타내었다. 상업지역의 경우, 내륙인 전포동에서 primary peak를 나타내는 시각이 계절에 따라 1 시간씩 지연되었으며, 해안인 광복동은 전포동보다 봄철에 높은 농도를 나타내었다. 주거지역의 경우, 내륙인 덕천동과 용수리에서 봄철에 고농도의 PM10(80~90 ${\mu}g/m^3$)이 6시간동안 지속되어 나타났다.