• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.670-673
• /
• 2002

Powder synthesis using the alkoxy precursor technique exhibits processing flexibility not available in traditional high temperature solid-state reaction. With proper process control, impurities can be reduced to very low levels. The major distinction of the present work lies in the method of accomplishing the hydrolysis reaction. In the present case, water is not added to the system. Instead the metal alkoxide/alcohol solution is heated to a temperature at which water is formed through dehydration of the alcohol solvent, causing precipitation of the corresponding metal oxide (hydroxide). The present method provides a means of producing amorphous alumina.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.337-345
• /
• 1994

The reaction-sintered alumina and zirconia-alumina ceramics having low firing shrinkage were prepared from the Al/Al2O3 or Al/ZrO2(Ca-PSZ) powder mixtures via the attrition milling. And in this milling process the effect of the characteristics of used powders was investigated. Attrition milling was much more effective in reducing the particle size of ceramic/metal mixed powders than ball milling. Powder mixtures of flake-type Al with coarse alumina was much more effectively comminuted by the attrition milling than the mixtures of globular-type Al with coarse alumina powders. And coarse alumina than fine alumina was much more beneficial in cutting and reducing the ductile Al particles. In the contrary to Al/Al2O3 powder mixtures, Al/ZrO2 powder mixtures was not effectively comminutd. But whether using the alumina ball media or attrition milled with Al2O3 powder rather than Al, the milling efficiency was much more increased.

• 청정기술
• /
• 제22권4호
• /
• pp.232-240
• /
• 2016

최근 디스플레이 대형화 및 유연화로 인한 기존 ITO (indium tin oxide) 기반 TSP (touch screen panel)의 구현에 한계로 인한 대체 소재에 대한 다양한 연구가 진행 중이다. 기존 기술의 대체 소재로 메탈메쉬(Metal mesh) 방식에 대한 연구가 진행되고 상용화 수준까지 진행되었다. 그러나 시인성 및 모아레(Moire) 현상으로 인하여 $5{\mu}m$ 이하의 미세 전극 패턴이 필요하나 공정 중 패턴이 탈락하는 등의 문제로 낮은 수율의 문제가 있다. 기존의 레이저 CVD 리페어 공정에서 $10{\mu}m$ 이하의 패턴 형성의 한계, 위성액적 등의 문제로 인해 안정적인 미세전극 패턴 형성에는 어려움이 있었다. 본 연구에서는 $5{\mu}m$ 이하의 안정적인 패턴 형성을 위해서 다양한 점도에서 미세액적 토출이 가능한 전기수력학 프린팅 기술을 적용하였다. $5{\mu}m$ 이하의 안정적인 미세 전극 패턴 형성을 위해 주요 변수의 변화에 따른 최적 공정 조건을 도출하였고 최적 공정 조건을 입력하여 리페어 공정 적용 가능성을 확인하였다.

• 한국세라믹학회지
• /
• 제20권4호
• /
• pp.305-314
• /
• 1983

In order to enhance the rate of th nitridation and to give the high density of reaction-bonded silicon nitride MgO powder as nitriding aid were added to silicon powders and the mixture was pressed isostatically into compacts which were nitrided in the furnace of 1, 35$0^{\circ}C$ where 95% $N_2$-5% $H_2$ gases were flowing. As the other nitriding aid $Mg(NO_3)_2 6H_2O$ was selected, A slip made of magnesium nitrate solution and fine silicon particles was spray-dried and then decomposed at 30$0^{\circ}C$. Magnesium oxide-coated silicon powders were formed into compacts prior to the nitridation on the same condition as the former. Magnesium nitrate (MgO, produced from the decomposition of magnesium nitrate) was more effective for the formation of the $\beta$-phase in the initial stage of the nitridation probably due to the easy formation of $MgO-SiO_2$-metal oxide eutectic melt. It has been confirmed that forsterite was formed as a result of the reaction between MgO and $SiO_2$ film of silicon surface. It was considered that MgO produced from magnesium nitrate may be finer more reactive and more uniformly distributed on the surface of silicon particles than original MgO. The higher the forming pressure was the more the $\beta$-phase was formed.

• 한국분말재료학회지
• /
• 제18권4호
• /
• pp.327-331
• /
• 2011

In order to fabricate the porous metal with controlled pore characteristics, unique processing by using metal oxide powder as the source and camphene as the sublimable material is introduced. CuO powder was selected as the source for the formation of Cu metal via hydrogen reduction. Camphene-based CuO slurry, prepared by milling at $47^{\circ}C$ with a small amount of dispersant, was frozen at $-25^{\circ}C$. Pores were generated subsequently by sublimation of the camphene. The green body was hydrogen-reduced at $200^{\circ}C$ for 30 min, and sintered at $500-700^{\circ}C$ for 1 h. Microstructural analysis revealed that the sintered Cu showed aligned large pore channels parallel to the camphene growth direction, and fine pores are formed around the large pore. Also, it showed that the pore size was controllable by the slurry concentration.

• 한국광물학회지
• /
• 제28권2호
• /
• pp.147-163
• /
• 2015

석탄화력발전 부산물인 석탄회의 희유 금속 재활용을 위한 기반 연구로서 9개 발전소의 석탄회를 대상으로 화학적 및 광물학적 특성을 분석하였다. 석탄회의 희유원소 화학조성은 전반적으로 셰일의 평균 조성과 부합하며, 국외 석탄회와 차이도 거의 없다. 그러나 국산 무연탄 비산재와 수입 유연탄 비산재는 무기원소 조성에서 약간의 차이가 있으며, 무연탄 비산재의 미연 탄소 함유량이 매우 높다. 바닥재와 비교하여 친황원소들이 비산재에 부화되는 경향이 있다. 규산염 유리가 주요 고상이며, 석영, 일라이트(백운모), 멀라이트, 자철석, 생석회, 경석고가 광물로 함유되어 있다. 규산염 유리는 Al과 Si가 주성분이고, Ca, Fe, K, Mg가 다양한 비율로 함유되어 있다. 규산염 유리는 다공성 구형 또는 비정형 부석질 입자들이며, 흔히 잔존 광물이나 산화철구, 또는 다른 유리입자들과 융접되어 있다. 산화철구 입자는 급속 성장한 산화철 미세 입자와 유리 기질로 구성되어 있다. 석탄회로부터 유가 금속 재활용을 위해서는 이상의 화학조성, 미세조직, 광물학적 특성들이 고려되어야 한다.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.471-483
• /
• 1994

The purpose of this experiment was to determine the effects of various surface treatments on veneering resin to metal bond for Ni-Cr alloy. The metal surfaces were treated as follows, Group 1 : Ground with carborudum point and followed by silicoating Group 2 : Sandblasted with $50{\mu}m$ aluminum oxide and followed by silicoating Group 3. Sandblasted with $250{\mu}m$ aluminum oxide and followed by silicoating Group 4 : Beaded with $200{\mu}m$ retention structures and followed by silicoating Group 5 : Silicoated in as cast condition Group 6. Beaded with $200{\mu}m$ retention structures only All specimens were veneered with resin. Each group was consisted of 20 specimens. 10 specimens were storaged in $37^{\circ}C$ water for 3 days and the rest 10 specimens were thermocycled 1000 times at temperature of $5^{\circ}C\;to\;55^{\circ}C$. The effects of various surface treatments on the bond strength between resin and metal interface were studied by means of four-point flexure test. The specimens which bad been ground with carborundum point. sandblasted with $50{\mu}m$ and $250{\mu}m$ aluminum oxide. beaded with $200{\mu}m$ retention structures and not been treated were observed with SEM. The following results were obtained 1. The bond strength of groups 2, 3, 4 and 6 were higher than the that of groups 1 and 5 (p<0.05) in the case of being storaged in $37^{\circ}C$ water for 3 day and there was no statistically significant difference in bond strength among groups 2, 3, 4 and 6. and between groups 1 and 5 (p>0.05). 2. The bond strength of the case of being thermocycled decreased in the following orders : groups 2, group 4, group 3, group 6, group 1, group 5 and there was no statistically significant difference in bond strength among groups 2, 3 and 4, between groups 1 and 5 (p>0.05). 3. A statistical difference in bond strength of each group between storaged and being thermocycled was demonstrated for group 5 (p<0.05). 4. The treated surfaces of groups 2, 3 and 4 had more fine undercut than that of groups 1 and 5 with SEM.

• 한국세라믹학회지
• /
• 제20권3호
• /
• pp.211-216
• /
• 1983

This work aims at characterizing silicon grains and its compacts. In order to remove iron silicon grains were washed with 5N hydrochloride at 60-7$0^{\circ}C$ for 170 hrs, and then followed the chemical analysis by atomic absorption spectrophotometer X-ray diffraction analysis SEM observation and specific surface area determination by B. E. T. Mixtures of graded silicon particles with two or three different sizes were made into packings by mechanical vibration. The mixtures were used to make compacts with 10 mm in diameter and 70mm in length by isostatically pressing at 1, 208 kg/$cm^2$ (20 kpsi) and 4, 255kg/$cm^2$ (60 kpsi) respectively. Bulk densities of packings and compacts were measured. A slip made of magnesium nitrate solution and fine silicon particles was spray-dried and then decomposed at 30$0^{\circ}C$ for the purpose of coating the uniform layer of magnesium oxide on the surface of particles. The results obtained are as follows: (1) About two thirds of iron content could be removed from silicon by washing silicon powders with hydrochloride. (2) Uniform layer of magnesium oxide on the surface of silicon could be prepared by spray-drying suspension and by decomposing it. (3) B. E. T. specific surface area of fine silicon particles was 2, 826.753$m^3$/kg. (4) In the binary system with two sizes of 40-53$\mu\textrm{m}$ particles and <10$\mu\textrm{m}$ particles the maximum bulk density of packing was 55% of theoretical value and that of compacts made at the pressure of 4, 255 kg./$cm^2$ (60 kpsi) was 73% of theoretical value. (5) In the ternary system with three sizes the maximum bulk density of packing was 1.43 g/$cm^3$and that of compacts was 1.80g/$cm^3$which is equivalent to 77.6% of theoretical value. The composition of the closest compact was consisted of 50% of 40-53$\mu\textrm{m}$ particles 20% of 10-30$\mu\textrm{m}$ particles and 30% of <10$\mu\textrm{m}$ parti-cles.

• 공업화학
• /
• 제20권5호
• /
• pp.465-472
• /
• 2009

본 총설에서는 최근 주로 연구되고 있는 활성탄, 탄소나노튜브, 팽창 흑연 및 활성 탄소 섬유 등 다공성 탄소재료를 중심으로 수소 저장량을 증대시키기 위한 기술 및 기 발표된 수소저장량과 그 장 단점에 대하여 고찰하였다. 수소저장능을 향상시키기 위한 탄소 내 기공의 최적의 크기는 0.6~0.7 nm로 조사되었다. 촉매의 경우 전이금속 및 그 금속산화물이 많이 이용되었으며, 주로 다공성 탄소재료에 도핑을 통해 수소저장능을 향상시켰다. 수소저장 매체인 다공성 탄소재료 중에서 활성탄은 대량생산이 가능하여 가격이 비교적 저렴한 장점이 있고 탄소나노튜브는 튜브의 튜브간 공간 외에도 내부공간에 수소를 저장할 수 있는 공간이 수소저장에 활용될 수 있다는 장점이 있다. 팽창 흑연은 흑연의 층 사이에 알칼리 금속의 삽입 시 층간 거리가 팽창하여 수소저장에 용이하고, 활성탄소섬유는 높은 비표면적과 발달된 미세기공이 수소흡착에 크게 기여한다는 점이 있다. 이러한 기존의 연구로 고려해 볼 때 다공성 탄소재료는 아직 달성되지 못한 DOE의 수소저장 목표치에 도달하기 위한 주요 유망한 후보재료 중의 하나이다.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.685-692
• /
• 2024

Currently used heating elements are metal and non-metal heating elements, including various types of heaters, and resistance line heating elements have a problem of decreasing thermal efficiency over time, so to solve this problem, a planar heating element using high-purity carbon materials and oxidation-resistant inorganic compounds was applied. Through the manufacture of planar heating elements using CNT, ruthenium composite materials, and ruthenium oxide, physicochemical performance and capacity were increased, and instantaneous responsiveness was increased. Through thick film technology applicable to various base bodies, fine patterns were formed by the screening method in consideration of the fact that the performance of the heat source depends on the viscosity and pattern shape. The heating element was manufactured by thick film printing technology by mixing ruthenium oxide, CNT, Ag, etc. The characteristics of each paste were analyzed through viscosity measurement, and STS 430 was used as a base. Surface temperature and efficiency were measured by testing heaters manufactured for small wind tunnels and real-vehicle experiments. The surface temperature decreased as the air volume increased, and the optimal system boundary was found to be about 200 mm. Among the currently used heating elements, this paper manufactured a planar heating element using thick film technology to find out the relationship between air volume and temperature, and to study the surface temperature.