• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.37-42
• /
• 2000

The boiler tubes and steam Pipes operating both at high temperature and pressure for a long period of time in a power plant are degraded by creep because of internal pressure. So, the remaining life of a component is evaluated by the creep rupture strength. Although the conventional method to evaluate the creep damage is widely used, it has some disadvantages such as requires large size specimen and long employed to evaluate the correlation between fracture toughness and evaluation time. Recently, new method so called "small lunch test' is used to evaluate degradation of creep. In this study, a conventional creep test and a small punch test are conducted using 2.25Cr-1Mo steel which is mainly used for the boiler tubes and steam pipes in power plant. The creep life, approximately 1,500 hrs, is determined by conventional method under a severe condition then specimens for a small Punch test are obtained after certain time intervals such as 1/4, 1/2 and 3/4 of final rupture time, respectively.

• Korean Journal of Adult Nursing
• /
• v.17 no.3
• /
• pp.411-424
• /
• 2005

Purpose: The purpose of this study was to develop and evaluate e-EBPP(Evidence-based Practice Protocol) system for nursing care for patients with dementia to facilitate the best evidence-based decision in their dementia care settings. Method: The system was developed based on system development life cycle and software prototyping using the following 5 processes: Analysis, Planning, Developing, Program Operation, and Final Evaluation. Result: The system consisted of modules for evidence-based nursing and protocol, guide for developing protocol, tool for saving, revising, and deleting the protocol, interface tool among users, and tool for evaluating users' satisfaction of the system. On the main page, there were 7 menu bars that consisted of Introduction of site, EBN info, Dementia info, Evidence Based Practice Protocol, Protocol Bank, Community, and Site Link. In the operation of the system, HTML, JavaScript, and Flash were utilized and the content consisted of text content, interactive content, animation, and quiz. Conclusion: This system can support nurses' best and cost-effective clinical decision using sharable standardized protocols consisting of the best evidence in dementia care. In addition, it can be utilized as an e-learning program for nurses and nursing students to learn use of evidence based information.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.12
• /
• pp.678-684
• /
• 2004

Automatic reclosing is a typical protection method in power distribution systems for clearing the temporary faults. However, it has a fatal weakness in regards to voltage sags because it produces successive voltage sags. In this paper, we explored successive impact of voltage sag due to the automatic reclosing of power distribution systems. The actual tests of low voltage loads were accomplished for obtaining the susceptibility of voltage sags. The final results of the test yielded power acceptability curves of voltage sag, and the curves were transformed the 3-dimensional CBEMA(Computer Business Equipment Manufacturer Association) format. For the quantitative evaluation of the impact of successive voltage sags, an assessment formulation using the voltage sag contour was proposed. The proposed formulation was tested by using the voltage sag contour data of IEEE standard and the results of the test. Through the case studies, we verified that the proposed method can be effectively used to evaluate the actual impact of successive voltage sans.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.111-115
• /
• 2009

Purpose: The aim of this study was to present fundamental information regarding clinical prognosis and clinical criteria for therapeutic intervention in stroke patients with focal pons infarction. Methods: Four stroke patients (male: 2, female: 2) who were diagnosed with pons infarction were recruited. All subjects had motor functions evaluated using methods such as the Motricity Index (MI), the Modified Brunnstrom Classification (MBC), Functional Ambulatory Category (FAC), and the Bathel Index (BI). Evaluations were done at least 4 times over a period that was approximately 8~11 months from stroke onset. We compared the final evaluation with the first evaluation. Results: All patients with focal pons infarction showed improvement with time in motor function. The physical strength of all patients was improved to normal or good grades from zero or trace grades in the Motricity Index test. Also, other motor functions such as ambulatory capacity and activities of daily living (ADL) improved with time. Conclusion: Aspects of functional recovery and clinical prognosis are clearly predictable for specific patients with focal pons infarction. In addition, adequate therapeutic interventions can be provided clinical criterion to patients, according to aspect of functional recovery. Accordingly, patients with pons infarction change for the better over time.

• Journal of Engineering Education Research
• /
• v.13 no.3
• /
• pp.18-33
• /
• 2010

This paper describes two capstone senior design courses for the Mechanical Engineering program at University of the Pacific. The first course taught in the Fall semester is entitled "Engineering Design/Senior Project I." The second course taught in the Spring semester is entitled "Engineering Design/Senior Project II." All Mechanical Engineering students with senior standing are required to take these two classes in this sequence. At the end of every Spring semester, industrial advisors are invited to assess the final senior projects during an annual Senior Project Day. This assessment is performed using the Program Outcomes and Program Educational Objectives established for Pacific's Mechanical Engineering program. Since all Mechanical Engineering students are required to complete senior projects, this is a 100% evaluation process. After the evaluations are done, the data sets are compiled and reviewed by the faculty for assessment purposes. It is important to note that the industrial advisors perform the evaluations, but the faculty members assess the information to determine if modifications need to be made to the program or courses. In addition to the senior project evaluations, general feedback from Mechanical Engineering Industrial Advisory Committee (MEIAC) members is also useful for the outcomes-based assessment process in addition to the definition and evaluation of Program Outcomes and Program Educational Objectives.

• Journal of Engineering Education Research
• /
• v.17 no.4
• /
• pp.21-24
• /
• 2014

The purpose of this study is to develop the engineering students leadership program and evaluate the pilot test. To this end, literature reviews covering various leadership programs were studied and a needs analysis survey was conducted. The needs analysis survey found that student subjects believe leadership to be an important quality, but that the current availability of leadership training programs is lacking. Furthermore, results of the study are as follows, with respective results listed in descending order. The majority of students selected on-line learning as their preferred training method, followed by blended learning and in-person learning. Students also indicated their preferred instructional method to be through on-line courses. Based on these results, a preliminary pilot program was experimentally launched for only 1 class's use. This process of the development for the Engineering Leadership Program consists of 4 stages. The first stage is a needs analysis survey, followed by the design of the program based on results from the needs analysis survey. Afterwards comes the development stage, followed by the implementation stage, comprised of two parts; the pilot test and the distribution. The final stage is the overall evaluation step. We are currently in the first step of the third stage (the pilot test) and only the overall evaluation stage remains. After the distribution, a follow-up study will be conducted to analyze the effectiveness of the implemented program.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.443-445
• /
• 2001

As the new large buildings are continuously being built with the advanced technology and skills, an adequate size of electric room needs to be obtained so that engineers establish an efficient and reliable system in the electric room. Considering the current capacity, its expansion and its connecting system, the final size of it should be determined in order to bring an effective use of the building. Usually the extension of electricity capacity is on the increase after construction and it comes from the lack of scientific evaluation on the electric room. Later when the expansion of computer and important electric equipment that needs much capacity is impossible, it will cause a great deal of damage to the renting business of the building as well as becomes the unstable factors of the whole system. Therefore, it is important to have the exact method of calculating the effective size of electric room, the heart of the building, especially when the value of land price is very high. In addition, it should be calculated in an accurate way due to the diversification of the system and the compact size of the electricity equipment. However, the research on this area and the comparison and evaluation of the size after construction have not been made enough and the results of them have not been applied when calculating a new size of electric room. Accordingly, this study examines three methods prescribed in the standards of electricity installation technology through case analysis and suggests substantial data by system, capacity, and purpose.

• The korean journal of orthodontics
• /
• v.45 no.6
• /
• pp.322-332
• /
• 2015

A 12-year-old girl was referred to our clinic for evaluation of an unaesthetic dental appearance. All permanent teeth were erupted, while the deciduous maxillary right canine was retained. Cone-beam computed tomography revealed a complete transposition of the maxillary left canine and first premolar involving both the crowns and the roots. Initial cephalometric analysis showed a skeletal Class III pattern, with a slight maxillary retrusion and a compensated proclination of the upper incisors. The patient's teeth were considered to be in the correct position; therefore, we decided to attempt treatment by correcting the transposition and using only orthodontic compensation of the skeletal Class III malocclusion. After 25 months of active orthodontic treatment, the patient had a Class I molar and canine relationship on both sides, with ideal overbite and overjet values. Her profile was improved, her lips were competent, and cephalometric evaluation showed acceptable maxillary and mandibular incisor inclinations. The final panoramic radiograph showed that good root parallelism was achieved. Two-year follow-up intraoral photography showed stable results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.30 no.4
• /
• pp.62-70
• /
• 1988

This study was conducted to solve the problems for the unsuitable parameters and the uncertainty of design flood can be appeared by low outliers were inclined to the lower part from the trend of the balance of the data. Derivation of reasonable design flood was attempted finally by modification of low outliers with analysis of flood frequency by means of Log Pearson Type Ill distribution. Three subwatersheds were selected as studying basins with the annual maximum series including low outliers along Geum River basin. The results through this study were analyzed and summarized as follows. 1. Log Pearson Type In distribution was confirmed as a reasonable one by X$^2$ goodness of fit test at Gong Ju, Gyu Am, og Cheon watershed along Geum River basin. 2. Probable flood flows for each watershed were derivated by flood frequency curve with outliers. 3. Weighted skew coefficient for each watershed was calculated for the evaluation of freq- uency factor which is needed for the modification of low outlier. 4. It was confirrned that adjusted frequency curve has a lower tendency than that of deletion of low outlier in common at all watersheds. 5. Final probable flood flows were derivated by modification with evaluation of modified basic statistics for three watersheds. 6. In comparison with a frequency curve with modification and one with outlier, The former has a higher probable flood flow within three years of return periods than that of the latter, and vice versa over three years of return periods.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.3
• /
• pp.421-429
• /
• 2009

This study was conducted to develop a recipe for a nutritional cookie containing Danggue powder, and to achieve an optimal ingredient composition and texture that would appeal to consumers of all ages. To reduce its content, wheat flour was partially substituted with Danggue in the formulation. Response surface methodology was used to analyze the measured results and showed 16 experimental points, including 2 replicates for the Danggue powder, brown sugar, and butter ingredients. The compositional and functional properties were measured, and these values were applied to a mathematical model. A canonical form and perturbation plot showed the influence of each ingredient on the final product. The sensory evaluation results indicated significant differences between samples for color (p<0.01), flavor (p<0.01), texture (p<0.05), and overall quality (p<0.05). As a result, the optimal ingredient levels for sensory quality were determined as 4.83 g of Danggue powder, 70.46 g of brown sugar, and 86.08 g of butter.