• Korea Journal of Hospital Management
• /
• v.4 no.1
• /
• pp.129-146
• /
• 1999

The overall objective of this article is to identify the strategic type of Korean hospitals in terms of Porter's framework and to examine differences in performance of the hospitals across strategic types. A survey was conducted through structured questionnaire for 739 hospitals in Korea and the data from 120 hospitals were utilized in the final analysis. Study results indicate that the most frequently used strategy was 'stuck-in-the-middle strategy'(26.7%), followed by 'focused cost leadership strategy'(24.0%), 'focused differentiation strategy'(20.8%), 'cost leadership strategy'(15.8%), and 'differentiation strategy'(13.7%). Overall, 'focused differentiation strategy' showed superior performance in terms of profitability of services, ability to retain patients and growth in revenue, while 'differentiation strategy' produced relatively low performance in general. Implications of these findings are also discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1C
• /
• pp.110-116
• /
• 2008

Maximum likelihood(ML) diretion-of-arrival(DOA) estimation is essentially optimization of multivariable nonlinear cost function. Since the final estimate is highly dependent on the initial estimate, an initialization is critical in nonlinear optimization. We propose a multi-dimensional(M-D) search scheme of uniform exhaustive search and improved exhaustive search. Improved exhaustive search is superior to uniform exhaustive search in terms of the computational complexity and the accuracy of the estimates.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.1
• /
• pp.45-53
• /
• 2010

This paper presents an improved parallel particle swarm optimization approach (IPPSO) based decomposed network for economic power dispatch with discontinuous fuel cost functions. The range of partial power demand corresponding to the partial output powers near the global optimal solution is determined by a flexible decomposed network strategy and then the final optimal solution is obtained by parallel Particle Swarm Optimization. The proposed approach tested on 6 generating units with smooth cost function, and to 26-bus (6 generating units) with consideration of prohibited zone effect, the simulation results compared with recent global optimization methods (Bee-OPF, GA, MTS, SA, PSO). From the different case studies, it is observed that the proposed approach provides qualitative solution with less computational time compared to various methods available in the literature survey.

• The Journal of Fisheries Business Administration
• /
• v.21 no.2
• /
• pp.55-84
• /
• 1990

The objective of this study is to develop an inventory model for the inventory management of a stocking point which sells processed fisheries products. The study, first of all, sets up fisheries processing companies, food companies, apparel companies, pharmaceutical companies and electronic and electrical companies as a population. Then, a comparative study is empirically applied to obtain the inventory characteristics of final products by industry through a survey of a sample selected by a random sampling procedure. The major inventory characteristics of processed fisheries products obtained from the above analysis can be summarized as follows : 1) The major demand characteristics of processed fisheries products is to have wide seasonal fluctuations because the supply of raw materials (i.e., fisheries products) heavily depends on the productive capacity of nature. 2) It has found that fisheries processing companies are the worst in inventory management among the various industries selected in the sample. However, the self-rating of inventory management system by inventory managers of companies shows that the fisheries processing companies are relatively higher than the other companies. 3) The portion of inventory holding cost out of inventory relevant cost is very high for processed fisheries products compared with final products of the other industries. 4) Processed fisheries products are distributed to final consumers through roughly two distribution echelons and take a parallel type inventory system for their distribution structure. In order to develop an inventory model which reflects the inventory characteristics of processed fisheries products mentioned in the above, an inventory model with partial backorders is developed under the situation of stochastic lead time under the consideration of the inventory characteristics of processed fisheries products and then an iterative solution method is provided for the model. Then this study analyzes sensitivity for the standard deviation of lead time in the model by numerical examples.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.179-190
• /
• 2020

As the business environment is rapidly changing with globalization and complexity of information flows, the uncertainty is also very increased for project environment. Although many studies have been conducted to find out the critical factors for project success, there still exist different views to define project success. Furthermore, implementing success formula for one project does not necessarily guarantee a success for another project since there are other elements that impede the success of project. In this regards, it is imperative to examine what are the barriers to project success. This study aims to examine the barriers that impede the success of project. Past literature was thoroughly reviewed to collect and develop a preliminary list of elements that affected project performance negatively. Experts were interviewed to refine the list and the final list of the measurement items were developed. A survey questionnaire was developed with the final list of measurement items, and a survey was conducted on the practitioners with project experience. After the survey, an exploratory factor analysis was conducted on the final list to extract the component dimensions which in turn formed the group of project barriers. The exploratory factor analysis provided ten factors, which are difficulty of process management, failure of project feasibility analysis, cost overruns and lack of cost benefits, unclarity project plan, strategic consistency error, stakeholder conflict, inaccuracy of requirement definition, disturbance of communication, technical environment change, negative attitude of top management.

• The Journal of Fisheries Business Administration
• /
• v.51 no.3
• /
• pp.17-31
• /
• 2020

The purpose of this study is to identify economic situation on scale of tuna distant longline fishery by analyzing its economies of scale using the cost function. To analyze its economics of scale, the deep-sea fishing statistics were used from 2012 to 2016. In detail, the number of panels for estimating the cost function was 68 tuna distant longline vessels from 2012 to 2016, and the total number of observations over the five years were 340. As a final model, the two-way fixed effect model based on the translog cost function was adopted through the F test, the Breusch-Pagan test and the Hausman test. As a result of the analysis, it was found that tuna distant longline fishery between 2012 and 2014 was diseconomies of scale, the fishery between 2015 and 2016 was economies of scale. However, the economic indicators of the scale from 2012 to 2016 were almost close to zero, indicating that the constant returns to scale, the optimal scale, were reached. Therefore, in the situation where the amount of fishery resources in the world continues to decrease, it is necessary to prepare a method to obtain economic benefits through scale maintenance and reduction rather than indiscriminate scale expansion.

• Journal of Distribution Science
• /
• v.17 no.4
• /
• pp.51-57
• /
• 2019

Purpose - This study aims to improve the distribution structure of the OLED market and develop cost-effective optimization techniques. Specifically, it is a study on the optimization of ferric chloride to improve the etch of SUS MASK for OLED. Research design, data, and methodology - Applying the optimal conditions of the experiment, the final confirmation was evaluated for improvement by the Process Capability Index (Cpk). It is possible to derive social performance such as improvement of precision of SUS MASK manufacturing, economic performance such as defect rate, reduction of waste generation and treatment cost, technological achievement such as SUS MASK production technology, improvement of profit structure of technology development and process improvement do. Results - The improvement of the Cpk before the improvement was made was confirmed to be 0.57% with a defect estimate of 25.07% with a failure estimate of 0.57% after the improvement, and 8.84% with a failure estimate of 0.57% level after the improvement. Conclusions - If the conclusions obtained from the specimen experiment are applied to the manufacturing process of SUS MASK, it will be possible to expect excellent cost-effective competitiveness due to the improvement of precision and reduction of defect rate to enhance the OLED market penetration.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.169-185
• /
• 2003

Recently many researchers contributed to the understanding of Quality Control System, but the use of economics in the design of quality assurance system is limited in treatment of the relationship between the average incoming quality level (or average process quality level) of the incoming lot and the average outgoing quality level of this lot. In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding and succeeding production process including inspection process. This approach recognizes that the decision at each manufacturing process (or assembly process), is to be determined not only by the cost and the average outgoing quality level of that process, but also by the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing or assembly process quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a general product manufacturing system with specified average outgoing quality limit are suggested.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.4
• /
• pp.1263-1274
• /
• 2021

In online competitive social networks, each user can be influenced by different competing influencers and consequently chooses different products. But their interest may change over time and may have swings between different products. The existing influence spreading models seldom take into account the time-related shifts. This paper proposes a minimum cost influence maximization algorithm based on the competitive transition probability. In the model, we set a one-dimensional vector for each node to record the probability that the node chooses each different competing influencer. In the process of propagation, the influence maximization on Competitive Linear Threshold (IMCLT) spreading model is proposed. This model does not determine by which competing influencer the node is activated, but sets different weights for all competing influencers. In the process of spreading, we select the seed nodes according to the cost function of each node, and evaluate the final influence based on the competitive transition probability. Experiments on different datasets show that the proposed minimum cost competitive influence maximization algorithm based on IMCLT spreading model has excellent performance compared with other methods, and the computational performance of the method is also reasonable.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.1
• /
• pp.17-29
• /
• 2002

The purpose of this study was to examine the application of the Activity-based Costing(ABC) system to analyze the cost of nursing services in the delivery room in a major medical center.The results of this study are as follows;1. In order to calculate the cost of nursing activities, 67 activities of staff nurses on a delivery room were identified and classified as direct nursing activities(45.2%), the indirect activities(32.1%), general management activities(13.9%) and others(8.8%).2. Nursing cost in the delivery room was classified into activity cost(29.9%) and common cost(70.1%). Activity cost involved direct activity cost of staff nurses. The common costs were categorized into indirect activity & general management cost of staff nurses, management cost of the head nurse and activity cost of assistants.3. The final cost objects of nursing services in the delivery room were nursing service for women who had normal vaginal deliveries and nursing service for women who had preterm labor.The total cost of nursing service for a woman who had a normal vaginal delivery was 165,710 won (100.0%). The cost incurred through direct activity cost of staff nurses(58,242 won, 35.1%), indirect activity & general management cost of staff nurses (55,643 won, 33.6%), management cost of head nurse (16,211 won, 9.8%), activity cost of assistants (35,614 won, 21.5%).If the number of days of hospitalization was presumed to be 14 days, the total cost of nursing service for woman who had preterm labor would be 1,845,901 won (100.0%). The cost incurred by direct activity cost of staff nurses in the activity cost (341,349 won, 18.5%), indirect activity & general management cost of staff nurses in the common cost(779,002 won, 42.2%), management cost of head nurse(226,954won, 12.3%), activity cost of assistants in the common cost(498,596 won, 27.0%).In this study, the cost of the nursing services in the delivery room was calculated based on the ABC system. The results of this study showed that resources are assigned to the nursing activities in the delivery room and the mechanisms for assigning the cost of activities for nursing services.