• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4398-4404
• /
• 2012

This thesis was conducted a numerical analysis on the radiant heat performance according to factors of design of heat sink for cooling of the automotive LED head lamp. The heat sinks were designed with 5 different types to fit the limited internal space by formula based on an existing product (Type 1). Designed heat sinks of five types were analyzed by ANSYS CFD V12.1, and the analysis results were compared with the existing type. The results of simulation were analyzed temperature distribution and average temperature, air flow characteristic, heat flux etc. This thesis was researched on the correlation of the cooling performance according to the heat sink structure and the fin shape. Through numerical analysis, could be confirmed heat sink Type 2 as the best results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.290-296
• /
• 2001

Fin metal particles of uniform shape, narrow size distribution and high purity are increasingly needed for specific uses in high tech industrial applications. Polyol process for the preparation of monodispersed cobalt powders in micron size is described. In this process in inorganic precursor is reduced in liquid polyol under controlled conditions. The reducing agent is the polyol itself and reaction parameters such as the traction temperature, reaction time, addition of protective agent and concentration of the precursor are varied for controling particles size, shape and agglomeration of the metal particles. An optimum synthesis condition was achieved at E.G/DiE/G volume ratio 1:4,Co$(OH)_{2}$polyol molar ratio 0.08~0.32 reaction temperature $210^{\circ}C$, PVP/Co$(OH)_{2}$ molar ratio 0.4.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.669-678
• /
• 2021

This study surveyed three land cover types in Chungju City in Chungcheongbuk Province to check the distribution of cultured bacteria in bio-aerosols according to land cover type. It was possible to compare and analyze the distribution of bacteria according to microclimatic changes at each measurement point by examining meteorological factors and bio-aerosols according to land cover. The microclimate temperature in each measurement point was 8.7℃ for the urban forest, 10.8℃ for the waterside green area, and 10.2℃ for the urban area, indicating the urban forest had the lowest temperature among the measurement points. The relative humanity was 61.8% fin the urban forest, 59.3% in the waterside green area, and 55.7% in the urban area, indicating that the urban forest was the most humid among the measurement points. The identified bacteria were found to be 43 genera and 99 species. In terms of species diversity of cultured bacteria, 22 genera were found in the waterside green area, 21 genera in the urban forest, and 17 genera in the urban area, 37 species were found in the waterside green area, 31 species in the urban area, and 31 species in the urban forest. Bacillus toyonensis and Pseudarthrobacter oxydan were the species present in all three types of measurement sites, and Herbiconiux flava was confirmed to inhabit green areas such as urban forests and waterside green areas. The analysis result of the bacterial concentration according to the microclimatic environment in each measurement point was 333 CFU/m³ in the urban forest, 287 CFU/m³, in the waterside green area, and 173 CFU/m³ in the downtown area. The relative humidity and wind speed were analyzed to show a similar trend as the concentration. This study is expected to provide basic data for healthy urban management and green area creation by identifying the distribution of cultured bacteria in bio-aerosols according to land cover type and comparing and analyzing the traits of bio-aerosol in each measurement point.

• Korean Journal of Environment and Ecology
• /
• v.35 no.3
• /
• pp.285-293
• /
• 2021

This study was conducted to elucidate spawning period characteristics and early life development of eight barbel loach, Lefua costata (Balitoridae) at the Jusucheon stream, Okgye-myeon, Gangneung-si, Gangwon-do, Korea between January and December in 2018. The spawning period was estimated to be from May to August, considering the change in the gonad-somatic index, the appearance of young fry, and frequency distribution in egg diameter. It was a multi-spawning type. The gender ratio was 1:0.79 with 1,117 females and 879 males collected. The egg size was 0.24-0.93 mm, with mature and immature eggs found during the spawning period. The size of mature eggs was 0.71±0.02 mm, and the average number of fecundity was 1,786±818 (n=31). Observation of the egg development showed that the fertilized eggs were the sticky, gray, segregated, and demersal type with 0.76±0.03 mm in diameter. The hatching of the embryos began at about 34 hours (hatching rate 50%) after fertilization underwater temperature of 25℃. The average length of the newly hatched pre-larvae was 2.7±0.11 mm. The average length of pre-larvae at 4 days after hatching was 4.5±0.16 mm, and the yolk sac was completely absorbed and entered the post-larvae stage. At 20 days after hatching, the average length of post-larvae was 11.5±0.67 mm, and their fin rays were formed before they transitioned to the juvenile stage. At 100 days after hatching, the average length reached 49.8±2.60 mm, and the appearance and the lateral sideband patterns were similar to those of the adult fish.

• Korean Journal of Ichthyology
• /
• v.36 no.1
• /
• pp.10-19
• /
• 2024

This study investigated the early life history of Hemibarbus labeo from in Wicheon, stream Nakdonggang-River, and compared their characteristics with closely related species. In April 2021, egg formation and development of autonomous fish were observed in fertilized eggs collected at four spawning sites. The size of the fertilized egg was 1.93~2.39 (average 2.22±0.15, n=30) mm. The water temperature was 22.2~24.1°C, and the hatching time took 109~115 hours. Newly after hatching, the total length of the yolk-sac larvae was 7.50~8.80 (average 7.99±0.46) mm, and the mouth and anus did not develop and had difficulty in being yolk. 6 days after hatching, the preflexion larvae were fed with a total length of 9.49~10.2 (9.78±0.23, n=30) mm. 10 days after hatching, the flexion larvae was 9.97~11.9 (10.7±0.72, n=30) mm in total length, and the tail of the vertebrae began to bend. 20 days after hatching, the postflexion larvae was 12.6~15.2 (13.9±0.77, n=30) mm in total length, and the tailbone was completely bent to 45°. 29 days after hatching, the total length of the juvenile was 16.9~19.8 (18.1±0.91, n=30) mm, and the number of fins reached an integer with 10 dorsal fins, 9 anal fins, and 7 ventral fins. The distribution of melanophore, such as the head, the center of the body, and the upper part of the fin, was different from that of the allied species during the postflexion larvae period, so the morphological characteristics could be distinguished.