• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1106-1115
• /
• 2021

본 연구에서는 80k Bulk carrier의 저항성능 향상을 목적으로 선미부에 1개의 핀을 부착해 선미 유동을 제어하였고, 저항성능 및 반류의 변화를 분석하였다. 부착된 핀은 직사각형 단면을 가지며, 길이와 폭, 두께는 고정된 채 길이 및 흘수 방향 부착 위치와 유선에 대한 각도만 변화가 있었다. 나선 및 핀이 부착된 선체에 대한 모형 스케일에서의 CFD 해석이 수행되었고, 그 결과를 실선 확장 후 비교하였다. 핀은 프로펠러로 유입되는 빌지 볼텍스의 경로를 선미 트랜섬 쪽으로 변화시켰고, 이는 프로펠러 상부와 선미부의 압력을 증가시켰다. 이로 인해 선체의 압력저항 및 전 저항이 감소되었으며, 감소율은 핀의 부착 위치가 선미 및 선저와 가까울수록 높았다. 또한 핀은 공칭반류를 감소시켰는데 핀의 각도가 커질수록 반류의 변화가 컸고, 전 저항 저감률은 최대가 되는 특정 각도까지만 비례하였다. 대상 선박에 단일 핀을 부착했을 시의 최대 전 저항 저감률은 약 2.1 %였고, 선미로부터 수선간장의 12.5%, 선저로부터 흘수의 10 % 위치에 14°의 각도로 부착됐을 때이다.

• Advances in aircraft and spacecraft science
• /
• 제5권4호
• /
• pp.411-430
• /
• 2018

This computational study examines the augmentation of classic 2-D Rayleigh-$B{\acute{e}}nard$ convection by the addition of periodically-spaced transverse fins. The fins are attached to the heated base of the cavity and serve to partition the cavity into 'units' with different aspect ratios. The respective impacts upon heat transfer of the fin configuration parameters - including spacing, height, thickness and thermal conductivity - are systematically examined through numerical simulations for a range of laminar Rayleigh numbers (0 < Ra < $2{\times}10^5$) and reported in terms of an average Nusselt number. The selection of the low Rayleigh number regime is linked to likely scenarios within aerospace applications (e.g. avionics cooling) where the cavity length scale and/or gravitational acceleration is small. The net heat transfer augmentation is found to result from a combination of competing fin effects, most of which are hydrodynamic in nature. Heat transfer enhancement of up to $1.2{\times}$ that for a Rayleigh-$B{\acute{e}}nard$ cavity without fins was found to occur under favorable fin configurations. Such configurations are generally characterized by short, thin fins with half-spacings somewhat less than the convection cell diameter from classic Rayleigh-$B{\acute{e}}nard$ theory. In contrast, for unfavorable configurations, it is found that the introduction of fins can result in a significant reduction in the heat transfer performance.

• 소성∙가공
• /
• 제23권6호
• /
• pp.386-391
• /
• 2014

In the current study, Al-Mn-Zn alloys are strip-cast and used as the base alloy for the core of aluminum clad sheets used in automotive condenser fins. Transition elements such as Cu and Cr are added to the base core alloy in order to improve the properties of the clad sheets. The AA4343/Al-Mn-Zn-X(X: Cu, Cr)/AA4343 clad sheets are fabricated by roll bonding and further cold-rolled to a thickness of 0.08 mm. Clad sheets were intermediately annealed during cold rolling at $450^{\circ}C$ in order to obtain 40% reduction at the final thickness. Tensile strength and sag resistance of the clad sheets are improved by Cu additions to the core alloy, while corrosion resistance is also increased. Cr-additions to the clad sheets enhance sag resistance and provide low enough corrosion, although tensile strength is not improved. The effect of Cu and Cr additions on the properties of the clad sheets is elucidated by microstructural analysis.