• 제목/요약/키워드: Filter Loss

검색결과 936건 처리시간 0.024초

집중 소자를 이용한 다이플렉서 설계 및 제작 (Design and Fabrication of Diplexer using Lumped Elements)

  • 박용욱
    • 한국전자통신학회논문지
    • /
    • 제7권1호
    • /
    • pp.9-14
    • /
    • 2012
  • 본 논문에서는 신호 분리와 합성이 가능한 다이플렉서를 설계 제작한 후 특성을 비교 분석하였다. 저역 통과 필터와 고역 통과 필터의 특성을 정합하여 다이플렉서로 구현함으로써 신호의 분리와 합성이 가능하다는 것을 시뮬레이션을 통해 확인하였다. 또한 신호 분리와 합성의 가능성을 입증하기 위해 실제 마이크로 스트립 구조로 제작하여 측정한 결과 다이플렉서의 저역통과 필터는 -0.4 dB의 삽입손실과 -30 dB의 반사손실, 1.6 GHz의 차단수파수 특성을 보였고 고역 통과 필터는 -0.8 dB의 삽입손실과 약 -30 dB의 반사손실, 1.9 GHz의 차단수파수 특성을 갖는 것을 확인할 수 있었다.

직사각형 링과 리지 구조를 이용한 도파관 저역통과 여파기 설계 (Design of Waveguide Low Pass Filter using Rectangular Rings and Ridges)

  • 오택균;최학근;이형기
    • 한국인터넷방송통신학회논문지
    • /
    • 제14권1호
    • /
    • pp.7-13
    • /
    • 2014
  • 본 논문에서는 위성통신 시스템에 사용 가능한 새로운 구조의 도파관 저역통과 여파기를 제안하였다. 제안된 저역통과 여파기는 고차모드의 간섭이 없는 광대역 특성과 저지대역에서의 충분한 감쇠 그리고 도파관의 소형화와 경량화를 위하여 evanescent-mode 리지 구조를 사용하여 설계 하였고, 도파관 내에 리지를 둘러싸는 직사각형 링을 삽입하여 반사손실과 격리도를 향상시켰다. 또한 매칭을 위해 여파기의 입출력 포트 단은 임피던스 스텝 구조를 사용하여 설계하였다. 제작된 저역통과 여파기는 통과 대역 주파수인 7.25 ~ 8.4 GHz에서 반사손실이 19.5 dB이상, 삽입손실은 1.41 dB이하로 측정 되었으며 억제 대역 주파수인 12.25 ~ 14.5 GHz에서의 격리도는 67.2 dB이상을 만족하였다.

An Optimal Design of the Compact CRLH-TL UWB Filter Using a Modified Evolution Strategy Algorithm

  • Oh, Seung-Hun;Wu, Chao;Chung, Tae Kyung;Kim, Hyeong-Seok
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권2호
    • /
    • pp.653-658
    • /
    • 2015
  • This paper deals with an efficient optimization design method of a compact ultra wideband (UWB) filter which can improve the characteristics of the filter. The Evolution Strategy (ES) algorithm is adopted for the optimization and modified to suppress the ripple by inserting an additional step to the ES scheme. The algorithm has the ability to control the ripple of an insertion loss in a passband as a modified approach. During the modified ES, a structure of initial shape is changed a lot, while includes the stepped impedance (SI) and the composite right/left handed transmission line (CRLH-TL). And an optimized filter satisfies the UWB specifications on the stopband and passband with an acceptable insertion loss. The filter achieves a much developed shape, the size of $15{\times}14mm$, the 3dB bandwidth from 2.7 to 10.8GHz, the flat insertion-loss less than 1dB, the wide stopband with 12~20GHz, and an acceptable return loss.

난청인의 난청 정도에 따른 비대칭 청각 필터 구현의 객관적 평가 (An Objective Estimation for Simulating of Asymmetrical Auditory Filter of the Hearing Impaired According to Hearing Loss Degree)

  • 주상익;전유용;송영록;이상민
    • 재활복지공학회논문지
    • /
    • 제3권1호
    • /
    • pp.27-34
    • /
    • 2009
  • 난청인의 청력 손실은 개인별로 다양하므로 기존의 대칭적으로 주파수 밴드별 청각 필터를 구현하는 방법은 다양한 형태의 난청인의 청력 손실을 적절하게 모사해주지 못한다. 각 중심주파수와 음성의 입력크기에 따라 청각 필터의 형태가 비대칭적으로 바뀌고 청력손실이 있는 난청인은 청력 손실에 따라 청각필터의 형태가 정상인들과는 다른 형태로 바뀌게 되며 음질에도 차이가 있다. 본 연구에서는 난청인의 난청 정도에 따라 변하는 비대칭 청각 특성을 잘 반영한 청각필터를 구현하여 몇 가지 실험을 통해 각 구현된 청각 필터의 성능을 객관적으로 평가하였다. 실험은 구현된 청각 필터를 통한 음성의 perceptual evaluation of speech quality (PESQ) 와 log likelihood ratio (LLR)를 사용하였으며 그 값을 통해 처리된 음성의 객관적인 음질과 왜곡정도를 평가 하였다. 청력 손실을 주었을 때 대칭과 비대칭 청각 필터사이의 PESQ 와 LLR 값을 실험해 본 결과 청각 필터 간의 큰 차이를 보였다. 위 실험 결과들로 대칭과 비대칭 청각 필터의 형태에 따라서 음성의 음질에 영향을 받는다는 것을 알 수 있었다. 특히, 난청이 있을 때 중심 주파수별 청각 필터의 비대칭적 형태 변화가 난청인이 받아들이는 음질에 영향이 있었다.

  • PDF

Slurry wall 공법에서 안정액의 역할 (II) : 유한요소해석법 적용 (The Fluid Loss and Sealing Mechanisms in Slurry Trench Condition (II) : Finite Element Models of Fluid Loss for a Slurry Trench)

  • Kim, Hak-Moon
    • 한국지반공학회논문집
    • /
    • 제18권4호
    • /
    • pp.249-256
    • /
    • 2002
  • Slurry trench의 안정성은 안정액의 유압이 filter cake 막을 통하여 trench 벽에 전달됨으로서 확보될 수가 있다. 지반조건의 영향에 따른 slurry trench 공법에서 주변 공극수압의 변화를 수치해석(FEM)으로 추적하였다. 이러한 주변 공극수압의 변화 요인으로는 안정액의 밀도, filter cake의 상태, 토질조건, 시간, trench 심도, 주변지하수위로 조사되었으며, 가장 큰 영향력을 보인 요인으로는 토질조건과 filter cake 상태로 나타났다.

Cross-Coupled Microstrip Combline Bandpass Filter Using Stepped-Impedance Resonators

  • Cho, Young-Ho;Choi, Seung-Un;Yun, Sang-Won
    • Journal of electromagnetic engineering and science
    • /
    • 제7권4호
    • /
    • pp.190-194
    • /
    • 2007
  • In this paper, a cross-coupled microstrip combline bandpass filter using stepped-impedance resonators(SIRs) is proposed. In order to improve the selectivity as well as the insertion loss, the SIR configuration is used. The cross coupling is also introduced to enhance the selectivity. The improvement of the insertion loss is demonstrated not only by deriving the quality factor of the SIR but through the measured performances. Both the proposed and the conventional combline bandpass filter with 5 % of fractional bandwidth at 2 GHz were fabricated and tested. Compared to the conventional combline bandpass filter, the proposed one exhibits the improved selectivity as well as the lower insertion loss characteristics.

A Novel Compact Metamaterial Zeroth Order Resonant Bandpass Filter for a VHF Band and Its Stopband Improvement by Transmission Zeros

  • Kahng, Sungtek;Jang, Geonho
    • Journal of electromagnetic engineering and science
    • /
    • 제13권4호
    • /
    • pp.263-266
    • /
    • 2013
  • A novel compact and low-loss VHF bandpass filter is presented with enhanced stopband performance using metamaterial zeroth order resonator (ZOR) characteristics. An in-line ZOR filter is initially suggested and changed to have transmission zeros (TZs) due to source-load coupling for effective improvement of the isolation from UHF wireless channels. The proposed filter is smaller than 1/10 of the conventional filters in terms of size and has relatively very low insertion loss (< 1 dB for the electromagnetic (EM) simulation and < 3 dB for the measurement) and return loss (<-20 dB) in the passband due to the approximately 80% size reduction and the higher isolation in the stopband due to the TZs. The circuit and EM simulation are in good agreement with the measurements.

Implementation of Tuneable Filter Using CPW Coupled Line and Varactor Diode

  • Park, Jeong-Heum
    • 조명전기설비학회논문지
    • /
    • 제20권9호
    • /
    • pp.40-44
    • /
    • 2006
  • This study investigated a new tuneable bandpass filter based on coplanar waveguide coupled line structure, and using the varactor diode for tuning the center frequency of the filter. The filter was designed by a commercial simulator and had a tuning range of 180[MHz] from 0.95[GHz] to 1.13[GHz]. The filter acceptable values regarding the insertion loss was less than 3[dB] and its return loss greater than 12[dB]. The figure of merit of the implemented tuneable filter increased with the reverse bias voltage up to 14[V] on the varactor diode. The proposed filter has a promising future as it can be used in integration processes and in various materials as substrate.

초고주파용 필터설계를 위한 결합행렬 합성법 (Coupling Matrix Synthesis Methods for RF/Microwave Filter Design)

  • 최동묵;김채영
    • 한국통신학회논문지
    • /
    • 제32권12A호
    • /
    • pp.1346-1353
    • /
    • 2007
  • 본 논문에서는 필터함수의 감쇄극점(poles)과 반사손실(Return Loss)로부터 전송계수($S_{21}$)와 반사계수($S_{11}$)를 도출하고, 이 값들로부터 대역통과필터 설계를 위한 결합계수행렬 계산법을 제시하였다. 계산된 결합계수행렬에 유사변환을 적용하여서 결합계수행렬을 접힌 표준형 필터 구조의 커플링계수 행렬로 변환하였다. 그 결과를 이용하여 접힌 표준형 필터를 설계하였다.

Tunable Bandpass Filter with Varactors Based on the CRLH-TL Metamaterial Structure

  • Kim, Beom Kyu;Lee, Bomson
    • Journal of electromagnetic engineering and science
    • /
    • 제13권4호
    • /
    • pp.245-250
    • /
    • 2013
  • This paper presents a tunable bandpass filter based on the varactor-loaded composite right- and left-handed transmission line (CRLH-TL). The proposed filter is composed of one CRLH-TL unit cell, which corresponds to the third-order bandpass filter. The tunable bandpass filter is designed using only lumped-elements. The use of lumped elements saves space and lowers the fabrication cost. The size of the proposed tunable bandpass filter is $17mm{\times}5mm$, neglecting the feed lines and DC lines. All of the varactors are controlled by one DC bias. The center frequency of the bandpass filter can be controlled by varying the value of the varactors. The tunable range of the center frequency is from 412.5 to 670 MHz. The insertion loss is less than 3 dB, the return loss is more than 10 dB in the passband.