• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2577-2584
• /
• 1994

A method of digital image processing thechnique, which can multiply and sharpen isochromatic fringes in photoelasticity on both occasions, is developed. To test the method, photoelastic fringe patterns of a disk compressed by two diametrically opposite cocentrated loads are simulated and these patterns are processed to yield sharpened lines. The method is then aplied to measurement of residual stresses in glass bar. The procedure is proved to be capable of extraction sharpened lines accurately from photoelastic multiplied fringes, and yields good experimental results consistently and precisely.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.393-400
• /
• 2023

Displacements near crack and stress intensity factor (SIF) are key parameters to solve rock failure issue when using fracture mechanics. In order to study the horizontal displacement and stress intensity factor of the mode I fracture, a series of three-point bending tests of granite specimens with central notch were carried out. The evolution of horizontal displacements of precast notch and crack tip opening displacements (CTOD) were analyzed based on the digital image correlation (DIC) method. Stress intensity factors for three-point bending beams with arbitrary span-to-width ratios(S/W) were calculated by using the WU-Carlsson analytical weight function for edge-crack finite width plate and the analytical solution of un-cracked stress by Filon. The present study provides a high efficient and accurate method for fracture mechanics analysis of the three-point bending granite beams.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1524-1533
• /
• 1996

Risidual stress of cylindrical glass rods are measured by photoelasticity to study the variation of stresses with respect to heat treatment temperatures. In order to measure the stresses accurately, fringe sharpening and multiplication techniques are applied to the determination of photoelastic fringe orders. Filon's separationmethod is used to resolve circumferential and redial stress ocmponents from isochromatic fringes which are the same as in-plane maximum shearing stresses. According to the photoelastic measurements, residual stress is increased as the heat treatment temperature of the rods is raised from $560^{\circ}C$ to $650^{\circ}C$ All the circumferential stress components are changed from tensile stresses to compressive ones at approximate $R_m$/$R_o$ = 0.6, where $R_o$/ is outer radius and $R_m$any measured radius. This analysis shows that residual stresses of the glass rods approach zero if the rods are heat-treated near the strain point.