• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.87-93
• /
• 2000

Warm, forming technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical cup drawing of stainless-aluminum. clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to 18$0^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch corner area. Test materials chosen for experiments are STS304-A1050-STS304, STS304-A1050-STS430 clad sheets and A1050-0 aluminum sheet. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio as well as quality of drawn cups(distribution of thickness and hardness)are investigated and validity of warm drawing process is also discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.136-143
• /
• 2002

Warm draw die technique which is one of the new forming technologies to improve formability of sheet metal is applied to the cylindrical and square cup drawing of stainless-aluminum clad sheets. In experiments the temperature of die and blank holder is varied from room temperature to $180^{\circ}C$, while the punch is cooled by circulation of coolant to increase the fracture strength of workpiece on the punch comer area. Test materials chosen for experiments are STS304-A1050-STS304 clad sheets. Teflon film as a lubricant is used on both sides of a workpiece. The limit drawing ratio and relative drawing depth as well as quality of drawn cups(distribution of thickness)are investigated and validity of warm drawing process is also discussed. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant remover and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.3
• /
• pp.211-218
• /
• 2018

Instant face lifting cosmetics contain various film forming agents for stretching the wrinkles on the skin surface. But, most of the film-forming polymers have sticky feels. And they are easily scrubbed out when skin is rubbed on. In this study, we focused on the influence of sodium silicate that has rapid film forming effect on skin surface and immediate wrinkle reducing effect. Sodium silicate, also known as water glass or soluble glass, is a compound containing sodium oxide and silica. Sodium silicate is a white powder that is readily soluble in water, producing an alkaline solution. Sodium silicate is stable in neutral and alkaline solutions. The sodium silicate solution hardens by drying in air and rapidly forms a thin film. When the solution is applied to the skin, the fine membrane coating is formed by water evaporation and ionic bond re-formation. It also makes the strong siloxane (Si-O) bonding on the skin surface. When these fixation properties are applied to cosmetics, they can give remarkable skin tightening effect. The sodium silicate solution can provide the lifting effect by forming a film on skin at a proper concentration. But, skin irritation may be caused with too high concentration of sodium silicate. We studied a desirable range of the sodium silicate concentration and combination with other fixatives for skin care formulation that has no sticky feels and no scrubbing out phenomenon. Immediate lifting gel was developed by using sodium silicate and various thickening systems. Among of the various thickeners, aluminum magnesium silicate showed the best compatibility with sodium silicate for rapid lifting effect. This instant physical lifting gel was confirmed as a low stimulating formula by skin clinical test.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.109-114
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-midsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, the final preform has been modified by the experiment of pressure forming at the room temperature. To measure the contact status of parting surface of mold, the pressure film has been used. The midsole mold of the wedge structure type has been developed for the improvement of the contact status. The vertical pressing mold structure was introduced for the production of a flash-less midsole. By the investigation, flash of shoe-midsole was considerably reduced.

• Transactions of Materials Processing
• /
• v.4 no.4
• /
• pp.345-352
• /
• 1995

Warm deep drawing for optimum forming conditions to give the maximum drawing depth is investigated and compared with the results from experiments performed at room temperature. Experiments which draw square cups of STS 304 stainless steel sheet under the constant lubrication condition of teflon film are made both in a crank and hydraulic press for two kinds of specimens. The maximum drawing depth at warm forming condition reaches 1.4 times the drawing depth at room temperature in a crank press, whereas 1.6 times in a hydraulic press, and also more uniform distribution of thickness in case of warm deep drawn cup is observed. The effects of other factors on formability, such as forming temperature, speed of press and cooling of punch are examined and discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.103-108
• /
• 2005

In this study, to develop a flash-less mold for forming of shoe-outsole, experiments and forming analysis were carried out. In order to reduce the extra-materials, offset method and mass distribution method are used in the preform design. The vertical mold structure pressing the preform was introduced to produce a flash-less shoe-sole. To measure the contact status of parting surface of mold, the pressure film has been used. The guide-gutter system and the continuous pressing mold have been developed for the discharge of extra-materials and re-pressing. By the investigation, flash of shoe-outsole was considerably reduced.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.9-14
• /
• 2008

Agar-agar extracted from red algae was used as a surface sizing material for paper after filtering, bleaching, and viscosity adjustment by oxidative depolymerization. Oxidized starches from corn and tapioca were compared to agar-based surface size in the respects of paper surface modification, strength improvement, and printability. Agar-based surface size showed high strength improvement and good printability as much as starch-based ones except film forming ability, which may be improved by adding additives, and demonstrated its great potential to be used as inexpensive and high quality surface size in future.

• Archives of Pharmacal Research
• /
• v.28 no.3
• /
• pp.364-369
• /
• 2005

HPMC (Hydroxypropyl methylcellulose) was chemically modified, using maleic anhydrides, to obtain pH-sensitive HPMCAM (Hydroxypropyl methylcellulose acetate maleate) polymers for use as novel duodenum-specific coating agents. The pharmaceutical properties of HPMCAM, such as film forming, acid values, pH-sensitive values, water vapor permeability, tensile strength and Tg, were investigated, and found to show good film forming properties. The pH­sensitive values were 3.0 to 3.7. In vitro results demonstrate that HPMCAM could completely suppress drug release within 2h in a simulated gastric fluid (pH 1.2) and rapidly release the drug in a simulated pathological duodenal fluid (pH 3.4). These results indicate that HPMCAM might be a useful material for a duodenum-specific drug delivery system.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.41-43
• /
• 2004

Dielectric thin films of $(Pb_{0.72}La_{0.28})Ti_{0.93}O_3$ were deposited on $Pt(111)/Ti/SiO_2/Si$ substrates in situ by pulsed laser deposition(PLD) and annealed with different gases which are forming gas and oxygen gas, respectively. The diffusion of hydrogen into the ferroelectric film was caused by annealing process and resulted in the destruction of polarization. The dielectric properties of forming gas annealed PLT thin films, which are dielectric constant, ferroelectric characteristic, and leakage current characteristics, were degraded

• Journal of Microbiology and Biotechnology
• /
• v.11 no.2
• /
• pp.193-198
• /
• 2001

Preparation of antibacterial biopolymer film which is suitable for food packaging film was investigated using K-carrageenan as a base material. K-Carrageenan showed good biodegradability and film-forming characteristic but poor mechanical properties under humid condition. Also, various bacteria grew well on its surface. The poor mechanical properties could be improved by mixing with alginate at a 1:1 ratio and crosslinking with $CaCl_2$ solution. Antibacterial property coul be provided by modifying the K-carrageenan film surface with acrylic acid plasma followed by ion-exchange with $Ag^+$ ions. Such prepared film still showed good biodegradability by various fongi.