• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.3
• /
• pp.147-151
• /
• 1998

The conductivity test is a measure of electrolytes leakage from plant tissue. The shorter the maturation period after heading was the greater electrical conductivity (EC) of rice seed. The polymer-coated seed was not different in EC compared with non-coated seed. As soaking time of rice seed increased, EC increased gradually. The EC varied from 9.9 to 20.7$\mu$S $cm^{-1}g^{-l}$ for control plots and from 21.3 to 41.7$\mu$S $cm^{-1}g^{-l}$ for heat-killed seeds which were produced by autoclaving seeds at 121$^{\circ}C$ for 20 minutes. The germination speed (the rate of 5th day) of rice seed was 94% at control plot, 83% at low temperature and 20% at high temperature. Besides, germination percentage was 95% for the control, 92% for the low temperature treatment and 39% for the high temperature treatment. The EC was negatively correlated (r=-0.771$^{**}$) with germination percentage at low temperature. Water uptake in seeds of 30, 40, 50 days after heading (DAH) was greater than that of 20 DAH. Plant height of seedlings was 9.84 cm for the control but 4.32 cm for the high temperature treatment, and the tallest for polymer-coated seed. Dry weight of seedlings was 0.841 g for the control and 0.287 g at high temperature. Besides, the polymer-coated seed was heavier than non-coated seed. The number of roots was largest from 40 to 50 DAH and polymer-coated seed, but was decreased from 20 to 30 DAH. The length of roots was 20.52 cm at control plot and 19.89 cm polymer-coated seed but 8.68 cm for the low temperature treatment and 7.28 cm for the high temperature treatment.

• Economic and Environmental Geology
• /
• v.24 no.2
• /
• pp.107-129
• /
• 1991

The Yonghwa gold-silver deposits are emplaced along $N15^{\circ}{\sim}25^{\circ}W$ trending fissures in middle Cretaceous porphyritic granite or Precambrian Sobaegsan gneiss complex. The results of paragenetic studies suggest that vein filling can be subdivided into four identifiable stages; state I: the main sulfide stage, characterized by base-metal sulfide minerals, iron oxides and minor electrum, stage II: electrum stage, stage III: electrum and silver-bearing sulfosalts stage, stage IV: post ore stage of carbonates and quartz. The ore mineralogy suggests that depositional temperature of the formation of the gold and silver minerals are estimated as 200 to $250^{\circ}C$ and 140 to $180^{\circ}C$, respectively. Sulfur fugacity of the formation of the gold and silver minerals are estimated as $10^{-14.0}$ to $10^{-12.2}$ atm and $10^{-18.5}$ to $10^{-17.2}$ atm, respectively. A consideration of the pressure regime during ore deposition bases on the fluid inclusion evidence of boiling suggests lithostatic pressure of less than 180 bars. This range of pressure indicate that vein system lay at depth of 700m below the surface at the time during mineralization. Salinities of ore-bearing fluids range from 0.4 to 6.9 wt.% equivalent NaCl. The sulfur and carbon isotopic data reveal that these elements were probably derived from a deep-seated source. The ${\delta}^{18}O$ of the hydrothermal fluid was determined from ${\delta}^{18}O$ values of quartz and calcite. Oxygen and hydrogen isotopic studies reveal that meteoric water dominate over ore-bearing fluid.

• Journal of the Korean Society of Food Culture
• /
• v.16 no.5
• /
• pp.407-415
• /
• 2001

The purposes of this study were to assess th importance and performance of food suppliers and to explore the ways to improve the school foodservice purchasing management. The questionnaire regarding purchasing was composed of two parts. The part one consisted of questions on general characteristics of dieticians and school foodservice operations, and the part two was composed of questions on the importance & performance of food suppliers. Completed questionnaires were received from 286 dieticians of elementary school foodservice operations in Seoul. Statistical data analysis was completed using the SPSS/win for descriptive and t-test. In dieticians' demographic data, 36.6% were over 30 years old, 32.4% were $28{\sim}29$ years of age and 31.0% were below 27years old. Most of the respondents(68.3%) had overall working experiences less than 58 months and almost half of them(56.3%) were married. The school foodservice operations which employed a chef were 50.3%. The food suppliers' attributes that were recognized by the dieticians with high value of mean importance scores were: food quality, maintenance of food quality, accuracy in filling orders, quality of delivery facilities, on time delivery and packaging. Average mean score for importance was 4.33('important') out of 5 and mean score for performance was 3.50('so-so') out of 5. By IPA techniques, the attributes that deserve higher attention were those that ranked high in importance and low in performance(Quadrant A). The coordinates in Quadrant A were geographical location of supplier, maintenance of food quality, provision of information on cost variation and salesman's knowledge.

• Restorative Dentistry and Endodontics
• /
• v.39 no.3
• /
• pp.201-209
• /
• 2014

Objectives: This study evaluated the solubility, dimensional alteration, pH, electrical conductivity, and radiopacity of root perforation sealer materials. Materials and Methods: For the pH test, the samples were immersed in distilled water for different periods of time. Then, the samples were retained in plastic recipients, and the electrical conductivity of the solution was measured. The solubility, dimensional alteration, and radiopacity properties were evaluated according to Specification No. 57 of the American National Standards Institute/American Dental Association (ANSI/ADA). Statistical analyses were carried out using analysis of variance (ANOVA) and Tukey's test at a significance level of 5%. When the sample distribution was not normal, a nonparametric ANOVA was performed with a Kruskal-Wallis test (${\alpha}$ = 0.05). Results: The results showed that white structural Portland cement (PC) had the highest solubility, while mineral trioxide aggregate (MTA)-based cements, ProRoot MTA (Dentsply-Tulsa Dental) and MTA BIO ($\hat{A}$ngelus Ind. Prod.), had the lowest values. MTA BIO showed the lowest dimensional alteration values and white PC presented the highest values. No differences among the tested materials were observed in the the pH and electrical conductivity analyses. Only the MTA-based cements met the ANSI/ADA recommendations regarding radiopacity, overcoming the three steps of the aluminum step wedge. Conclusions: On the basis of these results, we concluded that the values of solubility and dimensional alteration of the materials were in accordance with the ANSI/ADA specifications. PCs did not fulfill the ANSI/ADA requirements regarding radiopacity. No differences were observed among the materials with respect to the pH and electrical conductivity analyses.

• Applied Microscopy
• /
• v.28 no.1
• /
• pp.91-105
• /
• 1998

The present study is undertaken to investigate the hypertrophical changes of the corpus allatum (corpora allata, CA) after the ovariectomy in Blattella germanica. In particular, the ultrastructural aspects of the normal and ovariectomized conditions, and induced factors of the hypertrophic phenomenon are focused. Ultrastructure of the CA from an immediately emergent adult is similar to that of the last larval stage that has stopped secreting juvenile hormone. The CA is composed of undifferentiated cells, exhibiting an electron-lucent matrix, a few mitochondria and less smooth endoplasmic reticulum. The karyoplasm occupy most of the cytoplasm. Electron-dense materials are filled with the intercellular spaces and gap junctions are also found. Almost no ultrastructural changes have been noticed during seven days until the oviposition. However, considerable changes in structure have been detected soon after the oviposition. Mitochondria are increased dramatically in number and cristae, and changed to the filamentous form with a high electron density. In addition, Golgi complexes, microtubules, and polysomes are also increased. After an oviposition, the total volume of the CA are decreased again. The volume of the CA are increased continuously, hypertrophy, after the ovariectomy. Morphological aspects of the CA in an early stage after the removal are similar to the structure of the secondary egg maturation. Large and electron dense globules are observed in the ovariectomized CA cytoplasms and they are present in those cells for a long period of time. Yet such a hypertrophical phenomenon occur only in the specific cells. The hypertrophy are caused by hollowing the part of the CA cells and later filling such site with polysomes. In 42 days after the ovariectomy, the nuclear membranes disappear in the CA cells, thus, exhibiting the prokaryotic-like features. Some results of the current study will contribute to the establishment of the model that explain unusual changes accompanied by certain treatment in insects and/or further in animals.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.3
• /
• pp.1-4
• /
• 2012

Effects of artificial holes on the cooling efficiency of single grain YBCO bulk superconductors were studied. Single grain YBCO bulk superconductors without artificial holes, with six 2.4 mm holes and six holes filled with Bi-Pb-Cd-Sn metal solder were fabricated by a top-seeded melt growth process for powder compacts with/without holes. Simulation for the cooling rate to a liquid nitrogen temperature (77 K) of YBCO samples was carried out using a finite element method (FEM) and the results are compared with the actual cooling rates of samples in liquid nitrogen. The simulated cooling times for the YBCO sample without holes, with six holes and with six holes filled with the metal solder were 80, 47 and 75 sec. respectively, which are similar to the actual cooling times of 84, 52 and 78 sec. estimated for the same samples cooled in liquid nitrogen. The shorter cooling time of the sample with artificial holes are attributed to the increased surface areas associated with the presence of artificial holes. The metal filling into the holes did not give any remarkable effect on the cooling efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.119-120
• /
• 2000

Influences of sustain voltage on wall charges and wall voltages are experimentally investigated in surface AC plasma display panels(AC-PDPs), in which electrode gap and width are $80\;{\mu}m$ and $270\;{\mu}m$, respectively. The filling gas is Ne-Xe gas mixture, and total pressures 300 Torr. Also it is found that the more amount of Xe mixing ratio makes the less wall charge and voltage for sustain voltage ranged from 140 V to 222 V. The response time has been delayed by adding a small amount of Xe to Ne in comparison with that without Xe. It is also found that the wall charge and voltage are reduced by adding a small amount of Xe to Ne in comparison with those without Xe.

• Journal of the Korean Dietetic Association
• /
• v.9 no.4
• /
• pp.288-296
• /
• 2003

The purposes of this study were to assess the school foodservice purchasing practices and to explore the ways to improve the school foodservice purchasing management. The purchasing questionnaire was composed of three parts, the part one consisted of questions on characteristics of dietitians and school foodservice operations, and the others consisted of questions concerning purchasing practices and importance & performance of food suppliers. 286 dietitians of elementary school foodservice operations in Seoul were participated with the survey. Statistical data analysis was completed using the SPSS/win for descriptive and t-test. The school foodservice operations which employed a chef were 50.3%. Only one third of the dietitians(34.1%) reported having been involved in the selection of food suppliers. In dietitians' demographic data, 36.6% were over 30 years old, 32.4% were 28-29 years of age and 31.0% were below 27 years old. Most of the respondents(68.3%) had overall working experiences less than 58 months and almost half of them(56.3%) were married. The food suppliers' attributes with high scores of mean importance were food quality, maintenance of food quality, accuracy in filling orders, quality of delivery facilities, on time delivery and packaging. Average mean scores for importance and performance were 4.33('important') and 3.50('so-so') out of 5. In the comparison of importance attributes, produce suppliers had a significant higher score on suppliers(P<0.05) than processing food suppliers. Processing food suppliers received significant higher performance scores on product(P<0.05) and service(P<0.05) compared to produce suppliers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1294-1301
• /
• 2001

In order to reduce the time and cost for assembly, automobile speaker grills have been injection molded with door trims or map pockets in one piece recently. However, several defects such as short shots or air traps can easily occur due to the decreased fluidity of the melting polymer according to the excessive heat transfer to the mold. Therefore, it is necessary to optimize the resin feed system and predict possible defects by CAE analysis. However it is not possible to obtain exact analysis results for the speaker grill by using general shell elements since the heat transfer in the thickness direction which is the dominant factor of the filling stage can not be considered. Therefore, there have been several efforts to simulate the injection molding nature of the speaker grill by using shell elements with an effective thickness which is smaller than the actual thickness of the part. Two empirical values have been recommended for the effective thickness in real practice. One is 50∼70% of the thickness of the speaker grill and another is the gap distance between the adjacent holes. In this paper, CAE analyses of a map pocket with a speaker grill were conducted using shell elements with both of these recommended effective thicknesses, and the predicted flow fronts were compared with the findings from injection molding experiments. The commercial code MOLDFLOW was used for injection molding analysis and an 850 ton injection molding machine was used for experiments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.2
• /
• pp.7-13
• /
• 2003

The Internet presents a unique platform for disseminating digital content such as music, video, games, software, text, business and proprietary corporate information. It promises ubiquitous access, while at the same time fundamentally challenging the traditional rules of ownership and distribution of content. In such environment, safe protection and proper delivery of digital content would be a crucial requirement toward a new e-business model. Research on the Digital Rights Management (DRM) focuses on filling this functional vacancy of the market transition by providing a more viable business model based. XrML(eXtensible Rights Markup Language) provides a universal tool for specification of rights, fees, and issuing conditions(licenses) associated with the use and protection of digital content. ContentGuard has developed XrML to unify the Digital Rights Management(DRM) specifications and encourage interoperability. It seems that all working groups of DRM agree to use XrMl for their right description language.