• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.57 no.4
• /
• pp.424-429
• /
• 2012

This study was carried out to investigate the influence of different planting time on the synthesis of isoflavone in black soybean, Three varieties used in this experiment were lpumgeomjeongkong, Cheongjakong and Heugcheongkong which had different ecotypes, repectively. Seeds were sown at different time, May 15th, May 30th and June 15th with planting density of $60{\times}15cm$. In order to analyze the content of isoflavone, we collected sample every 5 days from 30 days after flowering to harvest and analyzed them with UPLC. As sowing was delayed, the content of isoflavone increased in all of three varieties. The content of genistein was greater than daidzein and glycitein. Increase of Glycitein was not distinct from 55 days after flowering(DAF) and it was stable against temperature change during the seed developing period. Although the content of genistein in Ilpumgeomjeongkong from 50 to 55 DAF, in Cheongjakong from 40 to 55 DAF and in Heugcheongkong from 60 to 65 DAF was lower than the content of daidzein, it was higher than that of daidzein afterward. In the statistical analysis on the relationship between average temperature and the content of aglycone isoflavone at 5-day intervals from 30 DAF during the grain filling period, genistein in Ilpumgeomjeongkong showed meaningful correlation as y=-15.28x+407.9 ($R^2=0.505^*$), diadzein in Cheongjakong showed meaningful correlation as y=-6.188x-164.5($R^2=0.454^*$), and genistein showed significantly high correlation as y=-11.59x+297.6 ($R^2=0.545^{**}$). Taking all the above results into consideration, it was suggested that the regions suitable for high content of isoflavone in black soybean be the northern area of Gyeonggi-do and Gangwon-do, Chungcheongbuk-do and inland area of Gyeongsangbuk-do, where are relatively low average temperature from flowering stage($R_2$) during the grain filling period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.284-293
• /
• 2020

Rice consumption in Korea has been decreasing as the eating habits of the Korean people have diversified with rapid economic growth. Recently, floury endosperm rice cultivars were developed to boost rice consumption and replace wheat flour consumption with rice flour, which is vulnerable to viviparity under wet weather during the grain-filling stage because of its loosely packed starch granule structures. To overcome this limitation, it is necessary to find a suitable rice transplanting date to produce high-quality rice flour by altering the heading ecology type and changing the cultivation time by region. We examined four floury endosperm rice cultivars (FERC) in the Cheongju (central plain area) and Boeun (mid-mountainous area) regions of Korea from 2017 to 2019. Of the FERCs, the mid-late maturing types (MMT) Seolgaeng (SG), Hangaru (HGR), and Shingil (SGL) exhibited high yield and yield components after transplanting May 30 in both regions; the early maturing type (EMT) Garumi 2 (GRM2) also exhibited high yield after transplanting June 20 in Cheongju. In addition, MMTs showed the same tendency as the characteristics shown in Cheongju when grown in the Boeun region, and EMT displayed high yield and yield components after transplanting June 10. The FERCs could easily present pre-harvest sprouting in the rainy season during the grain-filling stage after 20 days post-heading because the mean temperature and frequency of more three-day rainfalls have increased over the last 5 years from the previous annual averages. Viviparity of HGR and GRM2 decreased as the transplanting date was delayed, with decreases of 2.3%-4.6% in HGR and 11.9%-23.1% in GRM2 according to the region. SGL was generally resistant to viviparity because of the Tongil type. To minimize pre-harvest sprouting and produce high yield of rice flour in the Chungbuk province, the most suitable transplanting time was the end of May in MMT and the middle and end of June in EMT.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.447-457
• /
• 2008

Laboratory tests for single plane sliding were conducted using the model rock slope to investigate the cut slope deformability and failure mechanism due to combined effect of engineering characteristics such as angle of sliding plane, water force, joint roughness and infillings. Also the possibility of prediction of slope failure through displacement monitoring was explored. The joint roughness was prepared in forms of saw-tooth type having different roughness specifications. The infillings was maintained between upper and lower roughness plane from zero to 1.2 times of the amplitude of the surface projections. Water force was expressed as the percent filling of tension crack from dry (0%) to full (100%), and constantly increased from 0% at the rate of 0.5%/min and 1%/min upto failure. Total of 50 tests were performed at sliding angles of $30^{\circ}$ and $35^{\circ}$ based on different combinations of joint roughness, infilling thickness and water force increment conditions. For smooth sliding plane, it was found that the linear type of deformability exhibited irrespective of the infilling thickness and water force conditions. For sliding planes having roughness, stepping or exponential types of deformability were predominant under condition that the infilling thickness is lower or higher than asperity height, respectively. These arise from the fact that, once the infilling thickness exceeds asperities, strength and deformability of the sliding plane is controlled by the engineering characteristics of the infilling materials. The results obtained in this study clearly show that the water force at failure was found to increase with increasing joint roughness, and to decrease with increasing filling thickness. It seems possible to estimate failure time using the inverse velocity method for sliding plane having exponential type of deformability. However, it is necessary to estimate failure time by trial and error basis to predict failure of the slope accurately.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.55-62
• /
• 2015

Cracking is an inevitable fact of asphalt concrete pavements and plays a major role in pavement deterioration. Pavement cracking is one of the main factors determining the frequency and method of repair. Cracks can be treated with a number of preventative maintenance actions, including overlay surface treatments such as slurry sealing, crack sealing, or crack filling. Pavement cracks can show up as one or all of the following types: transverse, longitudinal, fatigue, block, reflective, edge, and slippage. Crack sealing is a frequently used pavement maintenance treatment because it significantly extends the pavement service life. However, crack sealant often fails prematurely due to a loss of adhesion. Because current test methods are mostly empirical and only provide a qualitative measure of the bond strength, they cannot accurately predict the adhesive failure of the sealant. This study introduces a laboratory test aimed at assessing the bonding of hot-poured crack sealant to the walls of pavement cracks. A pneumatic adhesion tensile testing instrument (PATTI) was adopted to measure the bonding strength of the hot-poured crack sealant as a function of the curing time and temperature. Based on a limited number of test results, the hot-poured crack sealants have very different bonding performances. Therefore, this test method can be proposed as part of a newly developed performance-based standard specification for hot-poured crack sealants for use in the future. PURPOSES : The purpose of this study was to evaluate both the adhesion and failure performance of a crack sealant as a function of its curing time and curing temperature. METHODS: A pneumatic adhesion tensile testing instrument (PATTI) was adopted to measure the adhesion performance of a crack sealant as a function of the curing time and curing temperature. RESULTS: With changes in the curing time, curing temperature, and sealant type, the bond strengths were found to be significantly different. Also, higher bond strengths were measured at lower temperatures. Different sealant types produced completely different bond strengths and failure behaviors. CONCLUSIONS: The bonding strength of an evaluated crack sealant was shown to differ depending on various factors. Two sealant types, which were composed of different raw materials, were shown to perform differently. The newly proposed test offers the possibility of evaluating and differentiating between different crack sealants. Based on alimited number of test results, this test method can be proposed as part of a newly developed performance-based standard specification for crack sealants or as part of a guideline for the selection of hot-poured crack sealant in the future.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.267-277
• /
• 1997

The purpose of this study was to evaluate the shear bond strength of light-cured glass ionomer cements to dentin surface according to curing time induced by argon laser. In this study, 160 extracted human molars with sound crown were used. The dentin surface of these teeth were exposed with high speed diamond bur under water spray and polished with 120, 320, 400, 800, 1200 grits sand paper. 160 extracted human molars were randomly assigned into four groups (control, experimental 1, 2 & 3) with 40 teeth each. Control group used a visible light curing unit, XL 1000(3M Co., U.S.A) and experimental groups used argon laser($SPECTRUM^{TM}$). And then each group subdivided into two groups (A, B) according to filling materials. Subdivided A group used Fuji II LC(GC Co., Japan), B group used Vitremer(3M Co., U.S.A). The curing units and curing time of each group were as follows : Control group : visible light, 40 seconds Experimental group 1 Experimental group 2 Experimental group 3 : argon laser, 10 seconds : argon laser, 20 seconds : argon laser, 30 seconds The glass ionomer cements were bonded to dentin surface of each specimen. The specimens were stored in 100% relative humidity at 37"c for 7days. And then, the shear bond strength were measured by universal testing machine(Shimatzu Co. Japan) at crosshead speed of 5mm/min and 100kg in full scale and analyzed statistically. The following results were obtained : 1. Experimental group 2-A showed the highest shear bond strength with $9.87{\pm}1.24$ kgf and control group B showed the lowest shear bond strength with $4.08{\pm}0.78$ kgf(P<0.01). 2. The Fuji II LC showed higher shear bond strength with $9.49{\pm}1.24$ kgf than that of the Vitremer with $4.23{\pm}1.24$ kgf. There was significant difference between Fuji II LC and Vitremer(p<0.01). 3. There was no significant differences among experimental groups according to curing time induced by argon laser. 4. There was no significant differences between control group and experimental groups according to curing units.

• The Journal of the Korea Contents Association
• /
• v.13 no.9
• /
• pp.305-311
• /
• 2013

This study analyzed the oral status after recording the images by using QLF-D with targets of 38 youth people with hearing impairment and hearing language impairment. In order to investigate the state of oral hygiene, plaque index (O'Leary index) and contents of investigation of the state of the teeth included the number of sound teeth, the number of caries teeth, dental caries experience and the number of filling teeth. The following results were obtained. First, women lacked the management on plaque and had more caries teeth compared with men. In terms of impairment classification, subjects with both hearing and language impairment lacked the management on plaque and had more caries teeth. Second, subjects who did not get an oral exam for one year had more caries teeth. Oral hygiene score was the highest with the brushing time for 3-4 minutes. The number of sound teeth was increased as the brushing time was increased. In addition, the oral hygiene management time was the highest when cleaning the teeth, gums and tongue at the same time. Third, it was shown that the satisfaction of oral health education by using the new equipment was high. As a result of this study, in order to improve the oral health level of impaired students, they shall be trained to manage their teeth by themselves and educated to increase their motivation and practice. Thus, it is thought that various approaches which are differentiated from existing methods are required to be tried.

• Composites Research
• /
• v.34 no.4
• /
• pp.233-240
• /
• 2021

VaRI(Vacuum assisted Resin Infusion) process, which is cost effective and suitable for manufacturing large-sized composites, is an OoA(Out-of Autoclave) process. For rapid resin infusion in the VaRI process, a DM(distribution media) is placed on top of the fabric. The resin is rapidly supplied in plane direction of the fiber along the DM, and then the supplied resin is impregnated in the out-of-plane direction of fiber. It is difficult to predict the flow of resin because the flow of in-plane direction and the out-of-plane direction occur together, and a 3D numerical analysis program is used to simulate the resin infusion process. However, in order to analyze in 3D, many elements are required in the out-of-plane direction of fabric. And the product size is larger, the longer the analysis time needs. Therefore, in this study, a method was suggested to reduce the time required for flow analysis by simplifying the 3D flow analysis to 2D flow analysis. The usefulness was verified by comparing the 3D flow analysis with the simplified 2D flow analysis at the same conditions. The filling time error was about 7% and the reduction of flow analysis time was about 95%. In addition, by utilizing the constant difference in the flow front between the top, middle, and bottom of the fabric of the 3D analysis, the flow front of the top, middle, and bottom of the fabric can be also predicted in the 2D flow analysis.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1301-1314
• /
• 2022

Normalized Difference Vegetation Index (NDVI) is utilized as an indicator to represent the vegetation condition on the land surface in various applications such as land cover, crop yield, agricultural drought, soil moisture, and forest disaster. However, satellite optical sensors for visible and infrared rays cannot see through the clouds, so the NDVI of the cloud pixel is not a valid value for the land surface. This study proposed a real-time correction of the underestimation noise for GEO-KOMPSAT-2A (GK2A) daily NDVI and made sure its feasibility through the quantitative comparisons with Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI and the qualitative interpretation of time-series changes. The underestimation noise was effectively corrected by the procedures such as the time-series correction considering vegetation phenology, the outlier removal using long-term climatology, and the gap filling using rigorous statistical methods. The correlation with MODIS NDVI was higher, and the difference was lower, showing a 32.7% improvement compared to the original NDVI product. The proposed method has an extensibility for use in other satellite products with some modification.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.8-17
• /
• 2011

Recently, fusion camera systems that consist of depth sensors and color cameras have been widely developed with the advent of a new type of sensor, time-of-flight (TOF) depth sensor. The physical limitation of depth sensors usually generates low resolution images compared to corresponding color images. Therefore, the pre-processing module, such as camera calibration, three dimensional warping, and hole filling, is necessary to generate the high resolution depth map that is placed in the image plane of the color image. However, the result of the pre-processing step is usually inaccurate due to errors from the camera calibration and the depth measurement. Therefore, in this paper, we present a depth map upsampling method robust these errors. First, the confidence of the measured depth value is estimated by the interrelation between the color image and the pre-upsampled depth map. Then, the detailed depth map can be generated by the modified kernel regression method which exclude depth values having low confidence. Our proposed algorithm guarantees the high quality result in the presence of the camera calibration errors. Experimental comparison with other data fusion techniques shows the superiority of our proposed method.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.508-512
• /
• 1998

The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.