• 대한소아치과학회지
• /
• 제30권2호
• /
• pp.238-244
• /
• 2003

본 연구는 치면열구전색재의 충전량이 미세누출에 미치는 영향을 비교분석할 목적으로 실시되었다. 6개의 군으로 나누어 각각 다른 충전량, 치면 전처리, 충전재를 적용하여 미세누출 양상을 비교하였다. 60개의 제 3대구치를 3개의 군으로 나누어 각 군당 20개씩 시편을 구성하였다. 각 치아는 교합면을 두 부분으로 나누어 한 부위는 충전재의 폭이 1mm이하가 되도록 충전하고(1, 3, 5군), 나머지 한 부위는 2mm이상 되도록 충전을 하였다(2, 4, 6군). 1, 2군은 산처리후 Helioseal F로 치면열구전색을 실시하였고, 3, 4군은 산처리후 상아질 접착제로 치면 전처리한 후 Helioseal F로, 5, 6군은 유동성 복합레진인 Tetric Flow로 치면 열구전색을 실시하였다. 500회의 열순환 및 색소침투 후, 미세누출도를 관찰하고 비교분석하여 다음과 같은 결론을 얻었다. 1. 동일한 충전폭을 적용하였을 경우, 미세누출도는 5군<3군<1군과 6군<4군<2군의 순으로 나타났으나 유의한 차이는 아니었다(p>0.05). 2. 동일한 재료와 치면처리를 하되, 충전폭만을 달리한 군들, 즉 1군과 크군, 3군과 4군, 5군과 6군간의 미세누출도에서는 유의한 차이를 보였다(p<0.05). 3. 미세누출은 전색재의 물성, 상아질 접착제 전처리 여부 보다 전색재의 충전량에 더 많은 영향을 받았다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.300-300
• /
• 2017

'Saemimyeon' a Tongil-type rice variety (Indica ${\times}$ Japonica), which contains high amylose contents is suitable for rice noodle production. Nowadays, the major parts of rice processing industry that includes products like rice flour and noodles are expected to partially replace wheat flour market. The volume of rice noodle market is getting bigger and can contribute to the rice surplus and farmer's income. This study was carried out to promote productivity and flour-making quality of 'Saemimyeon' by finding the most suitable transplanting and harvesting times. The transplanting days used were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$ and June $14^{th}$ and the planting distance used was 30 x 12cm. In addition, harvesting time was determined by days after heading time (40, 45, 50, 55 and 60 days). The field experiment was conducted at the experimental field in Miryang (Southern plain area of Korea) from 2015 to 2016. Our results suggest that the optimum transplanting days were from May $24^{th}$ to May $31^{th}$ which resulted to an average yield of 748~751kg/10a. Interestingly, yield was sharply decreased below 700kg/10a before May $10^{th}$ and after June $7^{th}$. The average grain filling rate before May $31^{th}$ was more than 83% but it declined to 75% after June $7^{th}$. The average temperature ranges from heading time to harvesting time was $ 21\sim25^{\circ}C$ and the estimated optimal temperature was $23.4^{\circ}C$ which is similar to May $24^{th}$ by regression equation. We found that the optimal harvest time was 45~50 days after heading time. It is hypothesized that low temperature at seed maturation time caused the lower grain filling rate therefore 'Saemimyeon' need to be transplanted before May $31^{th}$ for higher productivity. We found no statistical variation in amylose contents among experimental plots (28.2~30.4%). We conclude that the productivity of 'Saemimyeon' highly depends on temperature that is critical for grain filling stage controlled by transplanting time.

• Environmental Analysis Health and Toxicology
• /
• 제27권
• /
• pp.5.1-5.10
• /
• 2012

Objectives: The purpose of this study was to assess the risk of ingestion exposure of lead by particle sizes of crumb rubber in artificial turf filling material with consideration of bioavailability. Methods: This study estimated the ingestion exposure by particle sizes (more than 250 um or less than 250 um) focusing on recyclable ethylene propylene diene monomer crumb rubber being used as artificial turf filling. Analysis on crumb rubber was conducted using body ingestion exposure estimate method in which total content test method, acid extraction method and digestion extraction method are reflected. Bioavailability which is a calibrating factor was reflected in ingestion exposure estimate method and applied in exposure assessment and risk assessment. Two methods using acid extraction and digestion extraction concentration were compared and evaluated. Results: As a result of the ingestion exposure of crumb rubber material, the average lead exposure amount to the digestion extraction result among crumb rubber was calculated to be $1.56{\times}10^{-4}$ mg/kg-day for low grade elementary school students and $4.87{\times}10^{-5}$ mg/kg-day for middle and high school students in 250 um or less particle size, and that to the acid extraction result was higher than the digestion extraction result. Results of digestion extraction and acid extraction showed that the hazard quotient was estimated by about over 2 times more in particle size of lower than 250 um than in higher than 250 um. There was a case of an elementary school student in which the hazard quotient exceeded 0.1. Conclusions: Results of this study confirm that the exposure of lead ingestion and risk level increases as the particle size of crumb rubber gets smaller.

• 한국농공학회지
• /
• 제43권5호
• /
• pp.93-105
• /
• 2001

The permeability of converter slag, replacing material of sand mat on improving soft clay foundation, was evaluated in the laboratory as well as in situ test. Effects of grain size, flow water time and aging were investigated using sea and fresh water Converter slag which has a grain size less than 10mm were submerged with fresh water and sea water. In fresh water, the coefficients of permeability in samples A and B were measured as 4.50${\times}$10$^{-2}$ cm per second and 1.20${\times}$10$^{-1}$ cm per second, respectively while as 1.88$\times$10$^{-2}$ cm per second and 3.86$\times$10$^{-1}$ cm per second in sea water. The condition of turbulent flow may exit and was experimentally certified based on the relationship of hydraulic gradient and seepage velocity. After 180 days in using sea water, the coefficients of permeability of samples A and B decreased ten times smaller than those initial values, and after that time continually decreased as for till 360 days. Finally, filling with voids in high-calcium quicklime(CaO) may result in the reduction of coefficient of permeability. In-situ coefficient of permeability however was Practically satisfactory.

• Composites Research
• /
• 제29권2호
• /
• pp.60-65
• /
• 2016

본 연구에서는 Type IV 수소 압력용기 시제품의 충격하중 조건에 따른 구조 건전성을 분석하고자 유한요소해석과 FBG 센서 삽입을 통한 실시간 모니터링 실험을 수행하여 결과를 분석하였다. 플라이 모델링 기법을 활용한 유한요소해석을 통해 FBG 센서를 삽입할 수소 압력용기의 취약부 선정 및 가압 조건을 제시하였으며, 실험을 진행할 기초 정보를 확보하였다. 실제 용기제작에 앞서 시편 실험을 통해 FBG 센서의 삽입방식 신뢰성을 확보하였으며, 이후 해당 결과를 활용하여 필라멘트 와인딩 공정에 적용하였다. 비충격 가압 피로실험과 총 4회의 충격 피로실험을 수행하였다. 실험결과 비충격 가압 피로실험에서는 해석과 동일한 거동을 보였으며, 4회의 충격 피로실험에서는 용기의 충전 시간이 점진적으로 증가하고 충전률은 감소하는 것을 확인하였다.

• 지질공학
• /
• 제21권2호
• /
• pp.117-124
• /
• 2011

해안 매립 연약지반상에 도로나 제방을 성토한 경우 연약지반 속에서는 침하, 융기, 측방유동 등의 지반변형이 빈번하게 발생한다. 연약지반의 지반변형 거동을 지상에서 원지반을 훼손하지 않고 조사하기 위하여 전기비저항탐사법을 적용하여 보았다. 본 연구에서 해안지역의 점토질 퇴적층이 주로 분포하는 서해안 시화지구의 매립지역에서 실험성토를 실시하였다. 실험성토후, 성토하중에 의한 연약지반의 변형 영향범위를 확인하기 위하여 전기비저항탐사법을 실시한 결과, 수평방향으로는 성토 지역에서 남측으로 약 5 m 범위, 수직 방향으로는 지표해 약 5~6m로서 성토 높이의 약 1.0~1.2배 심도까지 높은 전기비저항으로 성토의 영향을 받는 것으로 나타났다. 본 연구결과 성토에 의한 연약지반의 변형을 해석하는데 전기비저항탐사 방법을 적용이 가능한 것을 확인하였다.

• 한국작물학회지
• /
• 제51권1호
• /
• pp.32-40
• /
• 2006

The nitrogen (N) absorption and partition of the rice plants are important indicators that can be used to improve the N use efficiency (NUE) of the plants. Improving the plant NUE can help to avoid nutrient waste that may cause environmental pollution. To investigate the N absorption and partition of the rice plants, Hwaseongbyeo (Japonica) and Dasanbyeo (indica/japonica) were applied with N fertilizers at the rates of 60, 120, and 180 kg N per ha in paddy field. Also micro plots of $0.81m^2$ were established inside each plot for application of $^{15}N-labeled$ fertilizer. The differences in N utilization of the rice plants were associated with the total N absorption and partitioning after the heading stage. In the grain filling period, the increase of nitrogen content in the total and leaf blades of Dasanbyeo was higher than that of Hwaseongbyeo. Soil N was the main contributor for the increase of total N of Dasanbyeo during the grain filling period. The N fertilizer uptake rate of Hwaseongbyeo rapidly increased with the increment of N fertilization rate. In Dasanbyeo, N fertilizer uptakes were similar under all rates and times of N application. From heading stage to harvest, Dasanbyeo continued accumulating nitrogen, whereas Hwaseongbyeo had small changes. In conclusion, the difference in nitrogen absorption and partition after heading of the two cultivars was caused by the ability of Dasanbyeo to accumulate and remobilize soil nitrogen to the grains during the grain filling period.

• Korea-Australia Rheology Journal
• /
• 제12권1호
• /
• pp.55-67
• /
• 2000

In this paper, an experimental study of the rheological behavior of granular flow in a new type of storage silo is presented. The main characteristic of the new design is a hexagonal shape chosen with the objective of minimizing the stresses applied to the stored grains, and to reduce grain damage during the filling and emptying processes. Measurements of stress distribution and flow patterns are shown for a variety of granular materials. Because of the design of the silo, the granular material adopts its natural rest angle at all times eliminating collisional stresses and impacts between grains. A homogeneous, low friction flow is naturally achieved which provides a controlled stress distribution throughout the silo during filling and emptying. Secondary dynamic stresses, which are responsible for wall failure in conventional silos of the vertical type, are completely eliminated. A comparison between the two geometries is presented with data obtained for these silos and a number of granular materials. The discharge pattern inhibits powder formation in the silo and the filling system virtually eliminates unwanted material packing. Finally, notwithstanding the rheological advantages of this new design, the hexagonal cells that constitute the silo have many other advantages, such as the possible use of solar energy to control the humidity inside them. The cell type design allows for versatile storage capabilities and the elevation above the ground provides unlimited transportation facilities during emptying.

• Restorative Dentistry and Endodontics
• /
• 제35권6호
• /
• pp.445-452
• /
• 2010

연구목적: 이 연구의 목적은 새로운 근단 역충전 재료를 개발하기 위해 MTA, MTA와 AH-plus 혼합물 (AMTA), 그리고 실험적 개발재료인 Portland cement-Epoxy resin composite (EPPC)의 미세 누출 및 물리적인 성질을 비교하는 것이다. 연구 재료 및 방법: 발거 치아 49개를 근관 성형하고 gutta-percha와 sealer로 충전하였다. 각 치아의 치근을 근단부 3 mm에서 절단하고 3 mm 깊이의 역충전 와동을 형성하였다. 15개씩 무작위로 분류한 치근을 세 군으로 나누어 각각 MTA, AMTA, EPPC로 충전하였고 네 개의 치근은 대조군으로 사용하였다. 각 군의 재료로 역충전이 완료된 모든 실험군을 젖은거즈로 덮고 24시간 동안 경화시켰다. 경화 후 72시간 동안 1% methylene blue 염색액에 담근 후, 치근단을 수직 절단하여 사진을 촬영하고 미세 누출을 평가하였다. Vicat apparatus를 사용하여 실험군 별로 경화시간을 측정하였으며, aluminum step wedge를 사용한 디지털 방사선 사진을 촬영하여 각 군의 방사선 불투과도를 평가하였다. 미세누출과 경화시간에 대해 각 군간의 차이를 일원배치분산분석 및 Scheffe 사후 검증으로 유의수준 95%에서 평가하였다. 결과: AMTA와 EPPC는 MTA군에 비해 적은 미세누출량을 보였다 (p < 0.05). AMTA는 가장 높은 방사선 불투과도를 보였으며 개발 재료인 EPPC군은 5 mm aluminum 두께의 방사선 불투과도를 보였다. MTA가 가장 긴 경화시간을 나타낸반면 EPPC군은 다른 군에 비해 초기경화와 최종경화 모두 가장 짧은 경화시간을 나타냈다 (p < 0.05). 결론: 이 연구 조건하에서, 신개발 재료인 EPPC는 치근단 역충전 재료로서 기존의 MTA보다 양호한 밀폐능력과 방사선 불투과성 및 짧은 경화시간 등의 역충전 재료로서 적절한 물리적 성질을 가진 것으로 보인다.

• 환경위생공학
• /
• 제21권1호
• /
• pp.66-75
• /
• 2006

When we looked at the seasonal food dregs of the eastern side of gangwondo, gangneung city's summer and winter food dregs showed 25.9 and 25.8% respectively due to the presence of beach areas and ski resorts. Sokcho city showed 28.12% in summer and yangyang gun's summer food dregs showed 40.2%. Yangyang gun's august food dregs showed 2.7 times larger than annual average amount. Outlook density showed regional characteristics. Data showed that food dregs' amount rate has been reduced gradually from 2005 because of the prohibition of direct filling up. As a result of compositions analysis, the eastern side of gangwondo's water fraction of living dregs were lower than that of chuncheon city where is located at the gangwondo's inland area. chuncheon city's data showed residential areas 53.5%, community areas 56.8% and commercial areas 55.6%. These discrepancies caused by the characteristics of dregs discharge type and climate. The caloric value of dregs has been increased incrementally after the ban of food dregs' direct filling up. Therefore, heating value of the dregs exceeds the existing furnace design spec and it can cause high caloric value problems, so we need additional research to solve these problems.