• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.71-76
• /
• 2024

Automatic production systems are constantly advancing technologies to improve productivity and safety. Specifically, liquid filling machines are primarily utilized to package products into drums after manufacturing process in the hazardous chemical industry. Most existing filling machines allow the operator to open the drum cap and inject the product directly or semi-automation. In this study, we have developed a cap opening and closing mechanism onto the existing drum filling machine, enabling automatic and safe cap manipulation while filling the product in the IBC tank. By applying the appropriate torque value through numerical analysis, we confirmed that the system worked without any problems during the process of opening and closing the cap. Therefore, it is expected that the developed machine will give more production and reduce human efforts without risk in the chemical packaging industry.

• 한국산업융합학회 논문집
• /
• 제23권3호
• /
• pp.507-513
• /
• 2020

Liquid filling machines are frequently used in packaging fields; however, there exists a problem in precisely measuring the quantity of the liquid. In the case where the liquid filling machine is not properly metered, there may be issues, such as the fluid exceeding the capacity or chemicals being exposed outside. In this paper, we propose a smart injection nozzle device that can solve the issues stated above. The proposed smart injection nozzle can raise the nozzle according to the water level to remove bubbles and inject the accurate amount of fluid. In addition, the efficiency of the logistics process is enhanced by the smart QR code. Through experiments using the developed smart injection nozzle device, we have noticed that the accuracy of injection capacity, nozzle position, reaction time and building data exceeded the target value. Therefore, it expected that this machine will give more production and save a lot of manpower for packaging industry.

• 한국염색가공학회지
• /
• 제12권1호
• /
• pp.1-11
• /
• 2000

This paper surveys the fabric weavability and machine efficiency in the various weaving looms such as Projectile, Rapiers, and Air-jet. Used projectile loom was Sulzer-PU, and FAST-R, THEMA-11E, and Picanol-GTX were used for Rapier looms, as the Air-Jet looms, Picanol PAT and OMNI types were used. Using these looms, 5 harness worsted satin fabrics were woven for surveying the fabric weavability and machine efficiency. Warp yam count of fabric is 1/40Nm, Sirofil, and filling is 1/30 Nm, worsted. End breaks of warp and filling directions for the various types of looms are measured and discussed with the mechanism of each loom. Warp and filling yam tensions are also measured and analysed with open width of shedding motion of each weaving machine. And various warp yam tensions with open width of shedding are measured and analysed according to the warp yam in various heald frame. These results fire also discussed with temples such as bar and ring. Warp yam tensions at the various positions on the fabric with various looms are measured and discussed with fabric mechanical properties such as tensile, bending, shear and surface.

• 월간포장계
• /
• 통권106호
• /
• pp.150-154
• /
• 2002

• Journal of Information Processing Systems
• /
• 제19권4호
• /
• pp.540-553
• /
• 2023

The hollow letter CAPTCHA (Completely Automated Public Turing test to tell Computers and Humans Apart) is an optimized version of solid CAPTCHA, specifically designed to weaken characteristic information and increase the difficulty of machine recognition. Although convolutional neural networks can solve CAPTCHA in a single step, a good attack result heavily relies on sufficient training data. To address this challenge, we propose a seed filling algorithm that converts hollow characters to solid ones after contour line restoration and applies three rounds of detection to remove noise background by eliminating noise blocks. Subsequently, we utilize a support vector machine to construct a feature vector for recognition. Security analysis and experiments show the effectiveness of this algorithm during the pre-processing stage, providing favorable conditions for subsequent recognition tasks and enhancing the accuracy of recognition for hollow CAPTCHA.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.1161-1162
• /
• 2011

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.112-118
• /
• 2002

Injection molding process factors such as molding temperature, injection pressure, flow rate and flow velocity, must be controlled properly in filling and packing phases in the injection molding process. In this study, effects of these factors on the injection molding were investigated through the flow analysis fur the filling and packing phases. Molding troubles like flow mark, weld line, sink mark, short shot and warpage can be caused by these injection molding process factors. Among them, the short shot was caused by that the packing pressure could not reach properly to the filling end part in the packing phase and hence the flow rate could not be supplied to the full. In addition, as the flow rate for the volumetric shrinkage during the frozen phase could not be supplied properly by the packing pressure, the short shot appeared. Here, the volumetric shrinkage reduced with increasing the packing pressure and also the warpage of molded part increased with increasing the packing pressure.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.44-53
• /
• 2002

Injection molding process factors such as molding temperature, injection pressure, flow rate and flow velocity, must be controlled properly in filling and packing phases in the injection molding process. In this study, effects of these factors on the injection molding were investigated through the flow analysis for the filling and packing phases. Molding troubles like flow mark weld line, sink ma가 short shot and warpage car be caused by these injection molding process factors. Among them the short shot was caused by the fact that the packing pressure could not reach properly to the filling end part in the packing phase and hence the flow rate could not be supplied to the full. In addition as the flow rate for the volumetric shrinkage during the f개zen phase could not be supplied Properly by the packing pressure, the short shot appeared. Here, the volumetric shrinkage reduced with increasing the packing pressure and also the warpage of molded part increased with increasing the packing Pressure.

• 월간포장계
• /
• 통권201호
• /
• pp.72-75
• /
• 2010

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2364-2369
• /
• 2015

본 논문에서는 고정밀 로터용 원심주조기 방식을 연구 및 개발함으로써 관련 업종의 생산성 향상을 위하여 로터의 충진율 해석을 통해 RPM에 따른 로터의 충진율을 비교해 최적의 RPM을 제시하였다. 회전속도가 600 rpm일 때 충진율 99.47%를 보여줌으로써 실제 작업현장에서의 결과와 비슷하므로 이를 토대로 추가적으로 수행하여 그 결과를 이용한다면 보다 정확한 공정설계를 할 수 있을 것으로 사료된다. 또한 소형 레이들의 전도율해석을 통하여 고품질의 주조제품이 생산될 수 있도록 적합한 소형 레이들의 온도를 분석하였다. 니크롬선을 이용한 가열장치가 없는 경우는 $427^{\circ}C$까지 급격히 떨어진 상태로 알루미늄용액이 급격히 굳어지기 시작했다. 그러나 니크롬선의 가열장치가 있는 경우에는 알루미늄 용액의 용융온도인 $660^{\circ}C$이상을 유지한 상태에서 작업을 할 수 있었으며 온도변화가 거의 없음을 알 수 있었다.