• Journal of the Korean Society of Industry Convergence
• /
• v.16 no.4
• /
• pp.133-140
• /
• 2013

This paper presents an overview of the concepts of optimal feeder design in relation to the loading of bulk solids for Automatic filling system that should be control the amount of goods and packaging to seal. Feeder modular device, important parts of the package, so in order to perform a conceptual design optimization techniques are applied in two steps. First of all derive the problems through structural analysis for the conceptual model of vibrating feeder. Secondly derive reasonable design model based on the results of the structural analysis of modified boundary shape and then verify it. The proposed system has the following goal that is satisfies the dynamic stability with minimum weight and optimization of the shape. As a result, the weight reduction of feeder is 2.1% and 7% increase in the natural frequency.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.9-20
• /
• 1999

The standard deviation is constant in the progress of Powder Injection Filling, The setting value of the filling amount can modify the numerical rate. Since high level of the numerical rate can get the effect of reducing the material cost, it improves the productivity by permitting the possibility of the economical production. Consequently, this thesis analyzed and suggests the numerical model which consider the economical factors of the Powder Injection Shaping progress, and I try to reinforce the competitive powder of the domestic medicine manufacture industry which face the wave of globalism and evolutionism.

• Journal of Korea Foundry Society
• /
• v.22 no.2
• /
• pp.82-88
• /
• 2002

Al-5.5Zn-2.5Mg-l.5Cu semi-solid slurry was prepared by cooling the liquid metal with a low superheat to a solid and liquid co-existing temperature. Relatively round solid particles could be obtained in the slurry through the simple process. The prepared slurry was deformed into the metallic mold by a press and the mechanical properties of obtained specimens were investigated. Mold filling ability of the alloy slurry was also investigated and compared with that of A356 alloy. Al-Zn-Mg-Cu alloy showed lower mold filling ability than A356 alloy probably because small amount of eutectic phase is present and the heat of fusion generated during solidification is smaller than that of A356 alloy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.4
• /
• pp.541-564
• /
• 1992

The purpose of this experiment was to study the effect of implantation of the dense hydroxyapatite (HA) granules$(Apaceram^{(R)})$ in the fresh extraction sockets on the residual ridge resorption in normal and induced diabetic rabbits. Sixty-four white rabbits, weighing 3.0kg, were utilized in this study and they were divided into four group : group 1-sixteen normal rabbits without filling HA granules, group 2-sixteen normal rabbits with filling HA granules, group 3-sixteen diabetic rabbits without filling HA granules, group 4-sixteen diabetic rabbits with filling HA granules. HA granules were filled immediately after extraction in the extraction sockets of the mandibular left 1st, 2nd, and 3rd molar in group 2 and 4, and no HA granules were filled in group 1 and 3. The calculation of residual ridge resoption was done at 4th week, 8th week, 12th week, and 16th week after surgery, and histologic examination was performed to study healing process at 2nd week, 4th week, 8th week, and 16th week after surgery. The results were as follows : 1. The amount of residual ridge resorption was largest in group 3, and smallest in group 2 in every interval. There was no statistically significant difference between group 1 and 4. 2. In all groups, the amount of residual ridge resorption was high until 4th week after surgery, but the rate of residual ridge resolution slowly decreased after 4th week 3. There was more active healing process in group 1 and 2 than in group 2 and 4. 4. According to filling of HA granules, there was no difference in the amount of new bone formation, but direct contact could be observed between newly formed bone and HA granules in group 2 and 4. 5. Group 1 and 3 showed marked bone resorption and adipose marrow from 8th-16th week after surgery, but group 2 and 4 did not show maeked bone resolution, and showed fibrous tissue and a little adipose tissue among trabeculae from 8th week.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.217-222
• /
• 2015

There has been increased amount of atmospheric pollutants including NOx and SOx which cause acid rain and photochemical smog as a result of increased use of fossil fuels. In order to reduce the amount of pollutants produced by fossil fuel, wet scrubber system is introduced in this experiment. Wet scrubber system is applied to a diesel engine (3,298 cc) and the amount of smoke is measured before and after the application in terms of aspect ratio, filling rate, and flow rate. The result showed a lot of smoke reduction when wet scrubber system was applied, and also the aspect ratios and water spray flow rate were the important factors to improve smoke reduction.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.35-40
• /
• 2023

In order to prevent an ammonia container from bursting under conditions such as overcharging and abnormal temperature rise, it is necessary to prepare accident prevention measures through analysis of the operating mechanism of the Thermally Activated Pressure Relief Devices (TPRD) attached to the container. In this study, stress analysis acting on the ammonia container under pressurized conditions, density change analysis according to temperature change, and correlation between container filling amount and temperature and pressure change were presented. In addition, the maximum filling amount of the ammonia container was calculated, and the temperature and pressure at the filling amount were calculated through the phase equilibrium diagram. Based on this, the appropriate melting point of the Thermally Activated Pressure Relief Devices was derived and verified through a melting temperature experiment. Based on the results of this study, conditions for preventing ammonia container rupture accidents were suggested.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.3
• /
• pp.507-513
• /
• 2020

Liquid filling machines are frequently used in packaging fields; however, there exists a problem in precisely measuring the quantity of the liquid. In the case where the liquid filling machine is not properly metered, there may be issues, such as the fluid exceeding the capacity or chemicals being exposed outside. In this paper, we propose a smart injection nozzle device that can solve the issues stated above. The proposed smart injection nozzle can raise the nozzle according to the water level to remove bubbles and inject the accurate amount of fluid. In addition, the efficiency of the logistics process is enhanced by the smart QR code. Through experiments using the developed smart injection nozzle device, we have noticed that the accuracy of injection capacity, nozzle position, reaction time and building data exceeded the target value. Therefore, it expected that this machine will give more production and save a lot of manpower for packaging industry.

• Journal of the Korean Geosynthetics Society
• /
• v.11 no.3
• /
• pp.37-42
• /
• 2012

The cement paste is mostly used as the filling materials of bored pile in Korea. The use of filling material based on cement paste is inefficient at field construction because it needs a lot of the charging mass. In addition, it has environmental problem according to the large amount of cement use because its strength is also larger than criterion. The excavated soil with stabilizer can be used as the filling materials when the bored pile is constructed. Therefore, this paper describes field application of solidified soil for economical efficiency and environment-friendly. The injection capacity of solidified soil is compared with cement paste's based on unconfined compressive strength test and field load test, and the appropriate of test results is evaluated by design criterion. The evaluation result shows that the capacity of excavated soil with stabilizer is similar to cement paste and the solidified soil is able to apply as filling materials of bored pile because it is satisfied with design criterion.

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.53-67
• /
• 1988

An investigation was carried out to compare the pulp responses against a few type of composite and streptococcus mutans contamination under the zinc oxide eugenol cement, and also confirmed pulpal responses of various composites with or without base. Seventy eight teeth from 6 dogs were employed and divided into 6 groups. Class V cavities were prepared on each tooth routinely with low speed dental engine. Paper disc about 0.3mm thick was immersed in the BHI broth in which streptococcus mutans had been enriched and the disc was inserted on the cavity floor prior to filling. Scotch bond puls Silux as Bis-GMA system composite resin and Helimolar as urethane system composite resin were adopted. Control group: Zinc-Oxide Eugenol cement filling Experimental groups: Group 1. Scotch bond + Silux filling with Dycal base Group 2. Heliomolar filling with Dycal base Group 3. Scotch bond + Silux filling without base Group 4. Heliomolar filling without base Group 5. Streptococcus mutans application. All cavities were sealed with thick ZOE cement to avoid marginal leakage. Postoperative intervals of 1, 2, 3, 4, 5 and 6 weeks teeth were carefully extracted, processed and stained with Hematoxylin and Eosin. The results were as follows: 1. S. mutans application group and composites without any base showed more severe pupal response than control group and dyca based groups. 2. The experimental group of S. mutans application showed severe response in the early stage compared to the two groups of composite resin without base, but no significant difference was found following periods. 3. The difference of pulpal response is not significant between Bis-GMA system and urethane system. 4. Streptococcus mutans application group and composites without base groups showed the evidence of histologic recovery at the six week cases and the large amount of reparative dentin was the prominent feature. 5. Pulp responses against every material were inclined to normal according to the time elapsed.

• Journal of Conservation Science
• /
• v.36 no.4
• /
• pp.284-295
• /
• 2020

This study focuses on reinforcement agents for wall damage, such as cracks, breakage, or delamination, for mural paintings from the Payathonzu temple. Experiments were conducted with filling and grouting agents based on the reinforcing method. In the filling reinforcement experiment, different mixing ratios of lime to sand, and additives (jaggery, seaweed glue, and Primal SF-016) were used. In the grouting reinforcement experiment, the mixing ratio of lime and pozzolan was the same, and the additive types were identical to the filling reinforcement experiment. The filling reinforcement experiment showed that there were fewer physical changes such as contraction, with a greater mixing ratio of lime to sand, however, the compressive strength decreased as the mixing ratio increased. With additives, the change in volume of agent decreased and the compressive strength increased, which was especially prominent for jaggery and Primal SF-016. The grouting reinforcement experiment showed that there was a remarkable contraction with an increased amount of moisture that originates from the characteristic of grouting agents that requires flowability. With additives, the water content of the agent decreased, whereas the compressive strength and adhesion increased. Among the additives, Primal SF-016 exhibited the highest compressive strength, and seaweed glue exhibited the most considerable viscosity and adhesion. The study results showed that the characteristics of reinforcement agents vary according to the mixing ratio and additives of the filling and grouting agents. Therefore, it is necessary to selectively apply the mixing ratio and additives for different reinforcement agents considering the wall damage for conservation treatments.