• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1139-1145
• /
• 2011

기존 봉합사를 이용한 미세혈관수술의 단점을 개선한 기계식 미세혈관 문합시스템은 크게 문합링-핀 시스템 및 디바이스로 구분된다. 유한요소해석을 이용한 본 연구에서 문합링파트는 생체적합성과 사출성형 가공성이 우수한 High Density Polyethylene(HDPE)가 적용되었고, 마이크로핀은 SUS316, Ti-6Al-4Nb, Ti-6Al-4V, unalloyed titanium 이상 4가지 재료가 적용되었다. 미세혈관 문합링 마이크로핀의 fillet radius, neck length가 von Mises stress 변화에 미치는 영향을 평가하기 위해 Short Neck(SN)과 Long Neck(LN)으로 구분하고, 필렛이 존재하지 않는 경우(SN-1, LN-1)와 존재하는 경우(SN-2, SN-3, LN-2, LN-3)로 구분하였다. 필렛 유무와 형상에 대한 von Mises stress의 변화비인 Fillet Radius Rate(FRR)와 동일 필렛형상 내에서 neck 길이변화에 따른 von Mises stress의 변화비인 Neck Length Rate(NLR)의 결과를 종합해본 결과 SN-3의 마이크로핀 neck 형상이 가장 안전한 설계 형상임을 파악할 수 있었다.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.51-60
• /
• 2007

This paper presents an algorithm of optimal cutting tool selection for machining of the point-based surface that is defined by a set of surface points rather than parametric polynomial surface equations. As the ball-end and fillet-end mills are generally used for finish machining in a 3-axis computer numerical control machine, the algorithm is applicable for both cutters. The optimum tool would be as large as possible in terms of the cutter radius and/or corner radius which maximise (s) the material removal rate (i.e., minimise (s) the machining time), while still being able to machine the entire point-based surface without gouging any surface point. The gouging are two types: local and global. In this paper, the distance between the cutter bottom and surface points is used to check the local gouging whereas the shortest distance between the surface points and cutter axis is effectively used to check the global gouging. The selection procedure begins with a cutter from the tool library, which has the largest cutter radius and/or corner radius, and then adequacy of the point-density is checked to limit the accuracy of the cutter selection for the point-based surface within tolerance prior to the gouge checking. When the entire surface is gouge-free with a chosen cutting tool then the tool becomes the optimum cutting tool for a list of cutters available in the tool library. The effectiveness of the algorithm is demonstrated considering two examples.

• 산업기술연구
• /
• 제20권A호
• /
• pp.169-178
• /
• 2000

The 4-point bending tests have been performed In order to estimate the effect of TIG-dressing on fatigue strength and fatigue characteristics quantitatively for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue tests, fatigue strengths of as-welded specimens have satisfied the grade of fatigue strength prescribed in specifications of korea, AASHTO and JSSC. Fatigue strength at 2 million cycles of TIG-dressing specimens have increased compared with as-welded specimens. As the result of beachmark tests, fatigue cracks occurred at several points, where the radius of curvature and flank angle in the weld bead toes were low, and grew as semi-elliptical cracks, then approached to fracture. As a result of finite element analysis, stress concentration factor in weld bead toes has closely related to the flank angle and radius of curvature, and between these, the radius of curvature has more largely affected in stress concentration factor than flank angle. As a result of fracture mechanics approaches, the crack correction factor of test specimens has largely affected on stress gradient correction factor in case a/t is below 0.4. From the relations between stress intensity factor range estimated from FEM analysis and fatigue crack growth rate, fatigue life has been correctly calculated.

• 한국기계가공학회지
• /
• 제19권4호
• /
• pp.58-64
• /
• 2020

Large-scale flooding due to extreme weather and typhoons causes heavy damage. This is especially true in urban areas where accumulated debris prevents the smooth drainage of rainwater in sewage facilities such as rain gutters installed near roads. In this study, to improve the drainage performance and effectively remove foreign substances by applying the dust screen used in rivers, the rain gutter with Coanda effect was simulated and compared with the experiment. The simulation was performed by setting the parameters to the fillet radius R₁ and R₂ at the top of the screen filter, the fillet radius R₃ at the bottom of the screen filter, and the height H of the gap W from the bottom. W is the gap at the backside of screen filter which is applied to stimulate the Coanda effect. According to the simulation results, the highest drain performance was 87.99% derived from R₁= 30mm, R₂= 5mm, R₃= 85mm, H= 75mm, and W= 2mm. The error rate of simulation results refer to the 4.89%~7.36% compared to the experimental results. In the future, by considering the slope according to the installation environment, the simulation results can be applied to the actual roadside to help prevent flood damage.

• 한국강구조학회 논문집
• /
• 제12권5호통권48호
• /
• pp.617-628
• /
• 2000

이 연구에서는 하중비전달형 필렛용접부를 대상으로 순수휨상태에서 TIG 처리에 따른 피로강도 향상정도 및 피로특성을 정량적으로 평가하기 위해서 4점 휨실험을 실시하였다. 피로실험결과 용접후처리를 실시하지 않은 시험체는 국내 외에서 규정하는 피로강도등급을 만족하고 있고 TIG 처리한 시험체는 용접후처리를 실시하지 않은 시험체보다 $2{\times}106$회 피로강도가 상회하는 것을 알 수 있었다. 또한 비치마크실험결과 피로균열은 용접지단부의 비드접선각도 및 곡률반경이 최소로 되는 점에서 다발적으로 발생하며, 반타원형 균열로 성장, 합체되어 파단에 이르는 것을 확인할 수 있었다. 한편 유한요소해석결과 용접지단부의 응력집중계수는 용접지단부의 비드접선각도 및 곡률반경과 밀접한 관계가 있으며, 이 중에서 곡률반경이 용접지단부의 응력집중계수에 보다 큰 영향을 미치는 것을 알 수 있었다. 한편 파괴역학적 해석결과 a/t가 0.4 이하인 경우에 기하학적형상보정계수가 균열보정계수에 가장 지배적인 영향을 미치는 인자임을 알 수 있었다. 또한 유한요소해석결과로부터 산정한 응력확대계수범위와 피로균열성장속도의 관계식으로부터 피로수명을 비교적 정확하게 산정할 수 있었다.