• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.779-792
• /
• 1997

Flow characteristics are numerically investigated when a packet of waves consisting of a Tollmien-Schlichting wave and a pair of Squire waves evolves in a flat-plate laminar boundary layer using a large eddy simulation with a dynamic subgrid-scale model. Characteristics of early stage transitional boundary layer flow such as the .LAMBDA. vortex, variation of the skin friction and backscatter are predicted. Smagorinsky constants and the eddy viscosity obtained from the dynamic subgrid-scale model significantly change as the flow evolves. Far Field noise radiated from the transitional boundary layer shows the dipole and quadrupole characteristics owing to the wall shear stress and the Reynolds stresses, respectively.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.138-144
• /
• 2003

A crack in a ferroelectric ceramic subjected to an electric field is analyzed. The boundary of the electrical saturation zone is estimated based on the finite-width saturation zone model, which is analogous to a finite-width Dugdale zone model for mode III. It is shown that the shape and size of the switching zone depends strongly on the boundary of the electrical saturation zone and the ratio of the coercive electric field to the yield electric field. The crack tip stress intensity factor under small scale conditions is evaluated by employing the model of electric nonlinear domain switching. It is found that fracture toughness of the ferroelectric material may be increased or decreased depending on the material property of electrical nonlinearity.

• 한국지반신소재학회논문집
• /
• 제21권1호
• /
• pp.33-48
• /
• 2022

This paper presents illustrative examples of the application of advanced digital image correlation (DIC) technology in the geotechnical laboratory tests, such as shallow footing test, trapdoor test, retaining wall test, and wide width tensile test on geogrid. The theoretical background of the DIC technique is first introduced together with fundamental equations. Relevant reduced-scale model tests were then performed using standard sand while applying the DIC technique to capture the movement of target materials during tests. A number of different approaches were tried to obtain optimized images that allow efficient tracking of material speckles based on the DIC technique. In order to increase the trackability of soil particles, a mix of dyed and regular sand was used during the model tests while specially devised painted speckles were applied to the geogrid. A series of images taken during tests were automatically processed and analyzed using software named VIC-2D that automatically generates displacements and strains. The soil deformation field and associated failure patterns obtained from the DIC technique for each test were found to compare fairly well with the theoretical ones. Also shown is that the DIC technique can also general strains appropriate to the wide width tensile test on geogrid, It is demonstrated in this study that the advanced DIC technique can be effectively used in monitoring the deformation and strain field during a reduced-scale geotechnical model laboratory test.

• Wind and Structures
• /
• 제14권3호
• /
• pp.253-283
• /
• 2011

This paper presents the field measurement results of wind effects on a super-tall building (CITIC Plaza, 391 m high) located in Guangzhou. The field data such as wind speed, wind direction and acceleration responses were simultaneously and continuously recorded from the tall building by a wind and vibration monitoring system during two typhoons. The typhoon-generated wind characteristics including turbulence intensity, gust factor, peak factor, turbulence integral length scale and power spectral density of fluctuating wind speed were presented and discussed. The dynamic characteristics of the tall building were determined based on the field measurements and compared with those calculated from a 3D finite element model of the building. The measured natural frequencies of the two fundamental sway modes of the building were found to be larger than those calculated. The damping ratios of the building were evaluated by the random decrement technique, which demonstrated amplitude-dependent characteristics. The field measured acceleration responses were compared with wind tunnel test results, which were found to be consistent with the model test data. Finally, the serviceability performance of the super-tall building was assessed based on the field measurement results.

• 한국해양공학회지
• /
• 제22권3호
• /
• pp.64-70
• /
• 2008

A full-scale field experiment is an important part in the design of ships and offshore structures. Full-scale tests in the ice-covered sea, however, are usually very expensive and difficult tasks. Model tests in a refrigerated ice tank may substitute this difficulty of full-scale field tests. One of the major tasks to perform proper model tests in an ice towing tank is to select a realistic material for model ice which shows correct similitude with natural sea ice. This study focuses on the testing material properties and the selection of model ice material which will be used in an ice model basin. The first Korean ice model basin will be constructed at the Maritime & Ocean Engineering Research Institute (MOERI) in 2009. With an application to the MOERI ice model basin, in this study the material properties of EG/AD/S model ice of IOT (Institute for Ocean Technology) Canada, were tested. Through comprehensive bending tests, the elastic modulus and the flexural strength of EG/AD/S model ice were evaluated and the results were compared with published test results from Canada. Instead of using an ice model basin, a cold room facility was used for making a model ice specimen. Since the cold room adopts a different freezing procedure to make model ice, the strength of the model ice specimen differs from the published test results. The reason for this difference is discussed and the future development for a making model ice is recommended.

• Journal of Mechanical Science and Technology
• /
• 제15권9호
• /
• pp.1319-1327
• /
• 2001

The results of stand and field testing of a combustion chamber for a heavy-duty 150 MW gas turbine are discussed. The model represented one of 14 identical segments of a tubular multican combustor constructed 1:1 scale. The model experiments were executed at a lower pressure than that in a real gas turbine. Combustion efficiency, pressure loss factor, pattern factor, liner wall temperature, flame radiation, fluctuating pressure and NOx emission were measured at partial and full loads for both model and on-site testing. The comparison of these items in the stand and field test results led to has the development of a method of calculation and the improvement of gas turbine combustors.

• 자원환경지질
• /
• 제29권6호
• /
• pp.699-712
• /
• 1996

자동 TDR 시스템을 이용하여 약 0.54 헥타 크기의 2개 현장에서 오염물질의 거동을 모니터링하였다. 오염물질의 수직적 플륨을 관측하기 위하여 추적자로서 $CaCl_2$를 순간주입(Pulse)방식으로 투입하였으며 오염물질 이동시간의 공간적 이질성과 현장규모의 운송모델 개념을 파악하기 위하여 횡방향으로 24개 지점과 5개의 다른 깊이, 즉 120개 지점에 50 cm 길이의 TDR 탐사침을 설치하여 잔존수 농도를 측정하였다. TDR에 의해 관측된 전기전도도를 검정하기 위하여 3가지의 다른 방법을 사용하였다. 깊이별 24개 지점에서 얻어진 평균 BTC 자료를 이용하여 CDE 모델과 CLT 모델의 파라미터를 추정한 결과 TDR 방법은 실내실험 뿐만아니라 현장에서의 오염물질 거동 분석에 유용하다는 결론을 얻었다. 또한 3가지 검정방법은 BTC 모양과 특히 오염물질의 첨두운송시간과 관련된 파라미터에 큰 영향을 미치지 않으며 사용된 검정방법 중 SLM 방법이 수평적으로 설치된 TDR 탐사침에 대해서 가장 적합한 것으로 나타났다.

• 천문학회보
• /
• 제46권1호
• /
• pp.36.1-36.1
• /
• 2021

Galaxy clusters host Mpc-scale diffuse radio emission giving us evidence of large-scale magnetic fields in the Universe. It is relevant to understand magnetic field amplification processes occurring at the center and outskirts of galaxy clusters. Each of these processes are believed to give rise to observed radio haloes and radio relics, respectively. In this work, we focus on studying the continuum and polarised emission in radio relics. We use threedimensional magnetohydrodynamical simulations of merger shock waves propagating through a magnetized, turbulent intracluster medium. Our model includes the diffusive shock acceleration (DSA) of cosmic ray electrons, their spatial advection and energy losses at run-time. We discuss the relation between the mock observation features and the underlying morphology of the magnetic field.

• 한국공간정보시스템학회 논문지
• /
• 제12권1호
• /
• pp.76-84
• /
• 2010

실내 공간과 같이 마이크로한 스케일에서의 분석을 위해 다양한 보행시뮬레이션 모델들이 연구 되어 왔으며, 이 중에는 social force 모델과 floor field 모델이 주목을 받는다. 이 중 연산이 복잡한 social force 모델보다는 CA 기반의 floor field 모델이 컴퓨터 시뮬레이션에 더 적합한 모델이라고 할 수 있다. 그러나 Kirchner 등이 제안한 floor field 모델에서는 dynamic field의 연산 시 자신의 dynamic 값에도 영향을 받을 수 밖에 없는 단점을 가지고 있으며, 본 연구에서는 이를 개선한 알고리즘을 제안한다. 본 연구에서는 dynamic field의 데이터 구조를 변경함으로써 자신의 dynamic 값은 배제한 다른 에이젼트의 영향만을 받도록 하였으며, dynamic 값의 초기값을 할당하는 문제도 현실적으로 변경하였다. 본 연구에서 제시된 알고리즘을 테스트하는 데에는 공간 DBMS에 저장된 실제 3차원 건물모델을 사용하여 추후 실내 센서를 이용한 실시간 대피 시스템에 적용할 수 있는 기반이 되도록 하였다.

• 한국화재소방학회논문지
• /
• 제24권6호
• /
• pp.28-33
• /
• 2010

본 연구는 전산유체역학기법을 통해 화재유동을 수치적으로 모델링하고 화재발열량계 내부의 유동특성과 발열량 측정의 불확실성에 영향을 미치는 주요 측정인자들의 특성을 파악하고자 한다. 수치해석에 이용된 프로그램은 ANSYS사의 CFX 12.1이고 에디소산모델과 P-1 근사법을 적용하여 연소반응과 복사열전달을 해석한다. 수치해석결과 $90^{\circ}$ 곡관이 적용된 배기덕트의 경우 측정면에서 상대적으로 비대칭성이 높은 유동분포를 보였으며 속도장의 편차가 온도나 농도장의 편차에 비해 상대적으로 높게 나타났다. 이러한 연구를 통해 신뢰성 높은 화재발열량계의 구축을 위한 설계과정을 최적화하고 효율적인 시스템 운영을 위한 기초자료를 제공한다.