• 제목/요약/키워드: Field-scale model

검색결과 958건 처리시간 0.026초

보안메트릭과 사이버 내성에 대한 연구동향분석에 관한연구 (A Study on Security Metrics and Research Trend Analysis on Cyber Resilence)

  • 이수진;안성진
    • 융합보안논문지
    • /
    • 제18권1호
    • /
    • pp.3-11
    • /
    • 2018
  • 오늘날 새롭게 등장한 Science of Security (SoS)라는 분야는 사이버 보안 영역에 대한 과학적인 접근 방법을 적용한 연구분야로서 보안 영역에서 등장한 새로운 패러다임이라고 할 수 있다. 복잡하고, 큰 규모 네트워크 환경의 동적인 변화와 다수의 프로토콜과 메커니즘 환경이 존재하는 현대에 이러한 네트워크 환경에 대한 보안을 위해 Formal Model과 자동화 분야를 연구하는 방향이다. 따라서 본 연구에서는 SoS와 같은 최신 사이버 보안 연구 동향에 대해서 분석하고, 선진국들의 연구 동향사례들을 조사하여 국내의 사이버 보안 개발 방향에 대해 새로운 접근 방법을 검토하고자 한다. 또한 다양한 사이버 보안의 패러다임에 대한 과학적 보안 연구 방법에 대해 국내의 현황을 분석해 보고 국내 사이버 보안 활성화에 대한 방향을 제시하고자 한다.

  • PDF

초전도 관내연선도체 접합부에서의 전류 불균일에 대한 수치적 분석 (Numerical analysis about current non-uniformity in superconducting CICC (cable-in-conduit conductor) joint)

  • 이상일;정상권;최성민;박갑래
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제9권3호
    • /
    • pp.41-45
    • /
    • 2007
  • This paper presents transport current non-uniformity in a joint for superconducting multistage cable-in-conduit conductor (CICC) and relaxation in the CICC. The joint is considered to have a current loop linked to an external magnetic field so that it becomes an emf voltage source. It is numerically analyzed using an electrical transmission line model. The inductive current in a resistive joint is compared to that of a non-resistive joint when the ramping field is applied vertically to the joints. Regarding the parameter values of the model. a full scale $Nb_3Sn$ CICC and a strand-to-strand (STS) joint for the toroidal field magnet of the KSTAR (Korea Superconducting Tokamak Advanced Research) device are referenced to. It is found that the resistive joint prevents the current from rising too much and enhances decaying the current when the ramping stops. The 'flattop' current is found to be proportional to the ramp rate of the field (dB/dt). The relaxation length, which is defined as the length within which the maximum induced current falls by 1/e. is found to saturate within 0.27m.

부산 연안역에서의 국지풍모델을 이용한 이류확산 수치모의 (Numerical Simulation of Advection and Diffusion using the Local Wind Model in Pusan Coastal Area, Korea)

  • 김유근;이화운;전병일
    • 한국대기환경학회지
    • /
    • 제12권1호
    • /
    • pp.29-41
    • /
    • 1996
  • The two-stage numerical model was used to study the relation between three-dimensional local wind model, advection/diffusion model of random walk method and second moment method on Pusan coastal area. The first stage is three dimensional time-dependent local wind model which gives the wind field and vertical dirrusion coefficient. The second stage is advection/diffusion model which uses the results of the first stage as input data. First, wind fields on Pusan coastal area for none synoptic scale wind showed typical land and sea breeze circulation, and convergence zone occured at 1200LST in northern of domain, in succession, moved northward of domain. Emissions from Sinpyeong industrial district were trasnported toward the inland by sea breeze during daytime, and reached the end part of domain about 1800LST. During nighttime, emissions return to sea by land breeze and vertical diffusion also contributes to upward transport. In order to use this model for forecast of air pollution concentration on the Pusan coastal area, it is necessary that computed value must be compared with measured value and wind fields model must also be dealt in detail.

  • PDF

Peak pressures on low rise buildings: CFD with LES versus full scale and wind tunnel measurements

  • Aly, Aly Mousaad;Gol-Zaroudi, Hamzeh
    • Wind and Structures
    • /
    • 제30권1호
    • /
    • pp.99-117
    • /
    • 2020
  • This paper focuses on the processes of wind flow in atmospheric boundary layer, to produce realistic full scale pressures for design of low-rise buildings. CFD with LES turbulence closure is implemented on a scale 1:1 prototype building. A proximity study was executed computationally in CFD with LES that suggests new recommendations on the computational domain size, in front of a building model, apart from common RANS-based guidelines (e.g., COST and AIJ). Our findings suggest a location of the test building, different from existing guidelines, and the inflow boundary proximity influences pressure correlation and reproduction of peak loads. The CFD LES results are compared to corresponding pressures from open jet, full scale, wind tunnel, and the ASCE 7-10 standard for roof Component & Cladding design. The CFD LES shows its adequacy to produce peak pressures/loads on buildings, in agreement with field pressures, due to its capabilities of reproducing the spectral contents of the inflow at 1:1 scale.

Large Scale Structures at z~1 in SA22 Field and Environmental Dependence of Galaxy Properties

  • Hyun, Minhee;Im, Myungshin;Kim, Jae-Woo;Lee, Seong-Kook;Paek, Insu
    • 천문학회보
    • /
    • 제46권2호
    • /
    • pp.68.1-68.1
    • /
    • 2021
  • We study galaxy evolution with the large-scale environment with confirmed galaxy clusters from multi-object spectroscopy (MOS) observation. The observation was performed with Inamori Magellan Areal Camera and Spectrograph (IMACS) mounted on the 6.5 m Magellan/Baade telescope in Las Campanas Observatory. With the MOS observation, we spectroscopically confirm 34 galaxy clusters, including three galaxy clusters discovered in Kim et al. (2016) and 11 of them have halo mass of > 1014.5 M. Among the confirmed clusters, 12 galaxy clusters are part of large-scale structure at z ~ 0.9, and their size stretches to 40 Mpc co-moving scale. In this study, we checked the 'web feeding model,' which postulates that more linked (with their environment) galaxy clusters have less quenched populations by investigating the correlation between properties of confirmed galaxy clusters and the large-scale structure environment. Lastly, we found that galaxy clusters that make up the large-scale structure have larger and widely spread values of total star formation density (ΣSFR/Mhalo) than typical clusters at similar redshifts.

  • PDF

Aeroelastic testing of a self-supported transmission tower under laboratory simulated tornado-like vortices

  • Ezami, Nima;El Damatty, Ashraf;Hamada, Ahmed;Hangan, Horia
    • Wind and Structures
    • /
    • 제34권2호
    • /
    • pp.199-213
    • /
    • 2022
  • The current study investigates the dynamic effects in the tornado-structure response of an aeroelastic self-supported lattice transmission tower model tested under laboratory simulated tornado-like vortices. The aeroelastic model is designed for a geometric scale of 1:65 and tested under scaled down tornadoes in the Wind Engineering, Energy and Environment (WindEEE) Research Institute. The simulated tornadoes have a similar length scale of 1:65 compared to the full-scale. An extensive experimental parametric study is conducted by offsetting the stationary tornado center with respect to the aeroelastic model. Such aeroelastic testing of a transmission tower under laboratory tornadoes is not reported in the literature. A multiaxial load cell is mounted underneath the base plate to measure the base shear forces and overturning moments applied to the model in three perpendicular directions. A three-axis accelerometer is mounted at the level of the second cross-arm to measure response accelerations to evaluate the natural frequencies through a free-vibration test. Radial, tangential, and axial velocity components of the tornado wind field are measured using cobra probes. Sensitivity analyses are conducted to assess the variation of the structural dynamic response associated with the location of the tornado relative to the lattice transmission tower. Three different layouts representing the change in the orientation of the tower model relative to the components of the tornado-induced loads are considered. The structural responses of the aeroelastic model in terms of base shear forces, overturning moments, and lateral accelerations are measured. The results are utilized to understand the dynamic response of self-supported transmission towers to the tornado-induced loads.

딥러닝 기반의 BERT 모델을 활용한 학술 문헌 자동분류 (Automatic Classification of Academic Articles Using BERT Model Based on Deep Learning)

  • 김인후;김성희
    • 정보관리학회지
    • /
    • 제39권3호
    • /
    • pp.293-310
    • /
    • 2022
  • 본 연구에서는 한국어 데이터로 학습된 BERT 모델을 기반으로 문헌정보학 분야의 문서를 자동으로 분류하여 성능을 분석하였다. 이를 위해 문헌정보학 분야의 7개 학술지의 5,357개 논문의 초록 데이터를 학습된 데이터의 크기에 따라서 자동분류의 성능에 어떠한 차이가 있는지를 분석, 평가하였다. 성능 평가척도는 정확률(Precision), 재현율(Recall), F 척도를 사용하였다. 평가결과 데이터의 양이 많고 품질이 높은 주제 분야들은 F 척도가 90% 이상으로 높은 수준의 성능을 보였다. 반면에 데이터 품질이 낮고 내용적으로 다른 주제 분야들과 유사도가 높고 주제적으로 확실히 구별되는 자질이 적을 경우 유의미한 높은 수준의 성능 평가가 도출되지 못하였다. 이러한 연구는 미래 학술 문헌에서 지속적으로 활용할 수 있는 사전학습모델의 활용 가능성을 제시하기 위한 기초자료로 활용될 수 있을 것으로 기대한다.

평다이를 이용한 대형로타의 자유단조에 관한 연구 (A Study on the Hot Free Forging of Heavy Rotors Using Conventional Dies)

  • 이경호;조종래;배원병
    • 소성∙가공
    • /
    • 제6권3호
    • /
    • pp.203-212
    • /
    • 1997
  • In this research, to obtain the optimal die width of CV die(conventional die), which replaces FM die in free forging of large scale rotor using the flat die, the model material experiments and theoretical analysis using three dimensional FEM are performed. The FM die, which was designed to remove Mannesmann's effect at the central part of the ingot, has very bad workabiltity in real field, therefore on the empirical base they use the CV die of wide width in actual working field. In this study, the excellency of CV die is proved quantitively, and the optimal die width of CV die is determined through the model material experiments and theoretical analysis using FEM in the point of effective strain, stresses, and load.

  • PDF

Biobarrier를 이용한 유기오염물질의 생물학적분해모의를 위한 수치모델개발

  • 왕수균
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
    • /
    • pp.137-140
    • /
    • 2003
  • This study presents a mathematical model for simulating the fate and transport of a reactive organic contaminant degraded through cometabolism in dual-porosity soils during the in situ bioaugmentations. To investigate the effect of dual-porosity on transport and biodegradation of organic hydrocarbons, a bimodal approach was incorporated into the model. Modified Monod kinetics and a microcolony concept [Molz et at., 1986〕 were employed to represent the effects of biodegrading microbes on the transport and biodegradation of an organic contaminant. The effect of permeability reduction due to biomass accumulation on the flow field were examined in the simulation of a hypothetical field-scale in situ bioaugmentation. Simulation results indicate that the presence of the immobile region can decrease the bioavailablity of biodegradable contaminants and that the placement of microbes and nutrients injection wells should be considered for an effective in situ bioaugmentation scheme.

  • PDF

불균질 매질에 따른 인공 합성 탄성파 자료 비교 (Comparison of synthetic seismograms referred to inhomogeneous medium)

  • 김영완;장성형;윤왕중;서상용
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.197-202
    • /
    • 2007
  • Most of seismic reflection prospecting assumes subsurface formation to be homogeneous media. These models are not capable of estimating small scale heterogeneity which is verified by well log data or drilling core. And those synthetic seismograms by homogeneous media are limited to explain various changes at field data. So we developed a inhomogeneous velocity model which can estimate inhomogeneity of background medium to implement numerical modeling from homogeneous medium and inhomogeneous medium on the model. Background medium using three autocorrelation functions in order to generate inhomogeneous velocity media was according to dominant wavelength of background medium and correlation length of random medium. And then we compared shot gathers. The results show that numerical modeling implemented at inhomogeneous medium depicts complex wave propagation of field data.

  • PDF