• Asian Pacific Journal of Cancer Prevention
• /
• 제17권12호
• /
• pp.5107-5111
• /
• 2016

Background: Epidemiological studies have indicated an increasing incidence of radiation induced secondary cancer (SC) in breast cancer patients after radiotherapy (RT), most commonly in the contra-lateral breast (CLB). The present study was conducted to estimate the SC risk in the CLB following 3D conformal radiotherapy techniques (3DCRT) including wedge field and forward intensity modulated radiotherapy (fIMRT) based on the organ equivalent dose (OED). Material and Methods: RT plans treating the chest wall with conformal wedge field and fIMRT plans were created for 30 breast cancer patients. The risks of radiation induced cancer were estimated for the CLB using dose-response models: a linear model, a linear-plateau model and a bell-shaped model with full dose response accounting for fractionated RT on the basis of OED. Results: The plans were found to be ranked quite differently according to the choice of model; calculations based on a linear dose response model fIMRT predict statistically significant lower risk compared to the enhanced dynamic wedge (EDW) technique (p-0.0089) and a non-significant difference between fIMRT and physical wedge (PW) techniques (p-0.054). The widely used plateau dose response model based estimation showed significantly lower SC risk associated with fIMRT technique compared to both wedge field techniques (fIMRT vs EDW p-0.013, fIMRT vs PW p-0.04). The full dose response model showed a non-significant difference between all three techniques in the view of second CLB cancer. Finally the bell shaped model predicted interestingly that PW is associated with significantly higher risk compared to both fIMRT and EDW techniques (fIMRT vs PW p-0.0003, EDW vs PW p-0.0032). Conclusion: In conclusion, the SC risk estimations of the CLB revealed that there is a clear relation between risk associated with wedge field and fIMRT technique depending on the choice of model selected for risk comparison.

• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.1089-1095
• /
• 2014

본 연구에서는 도심지 지하굴착시 많이 시행하고 있는 역해석기법에 의하여 최종변위를 예측하고 계측자료와 비교 분석함으로써. 굴착도중 역해석 기법의 효율성을 극대화 시키고, 동일한 조건의 현장에서 경제적이고 효과적인 시공관리가 이루어 질 수 있도록 하고자 한다. 첫 번째 단계로 역해석 기법을 적용한 현장을 사례로 제시하고 시공과 계측이 완료된 3군데의 다른 현장에 역해석 기법을 적용하였다. 두 곳 현장에서는 만족할 만한 결과를 도출하였으나 한 군데 현장에서는 해석치와 계측치와의 많은 차이를 보였다. 분석결과는, 역해석 조건과 굴착시공조건을 최대한 일치시켜야 하고, 지하연속벽이 강성의 연속벽체라 할지라도 RANKINE 토압조건과 상이하게 굴착하부의 변위가 크게 발생되는 조건에서는 토압의 전이현상으로 토압의 균등화가 이루어지기 때문에 삼각형 형태의 RANKINE 토압 적용성에 대한 신중한 제고가 필요하다. 그리고 토질정수 재산정시 풍화대의 점착력과 지하수위의 경험적 고려가 필요한 것으로 판단된다.

• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.977-988
• /
• 1994

본 연구는 연약지반상에 sand drain을 타설하고 성토하여 교대 및 교각을 시공하는 진월 인터체인지에서 기초지반의 침하, 융기 및 이미 시공된 교각기초부분의 수평방향 변위를 측정한 실측치와 Sekiguchi의 탄 점소성모델을 Biot의 압밀방정식과 결합하여 2차원 평면변형용조건으로 유한요소해석한 결과를 비교 검토하였다. 이때 교각기초인 강판말뚝은 등가의 강널말뚝벽으로 환산하였다. 그리고 환산한 벽체에 축력의 변화, 강성의 변화, 지지조건의 변화 및 고정점위치의 변화 동에 따른 기초지반의 거동과 강널말뚝벽체의 거동 특성을 밝혔다.

• 한국태양에너지학회 논문집
• /
• 제26권3호
• /
• pp.63-69
• /
• 2006

In order to positively cope with the international environmental regulations like UNFCCC (UN Framework Convention on Climate Change) and to overcome energy crisis Korea, who depends on import for more than 97% of required energy, needs to continuously proceed to development, spread and expansion of alternativeenergy and then, to cultivate the capacity to keep the balance of demand and supply of energy by itself. In this aspect, the technology of BIPV (Building Integrated Photovoltaic) is the field that the world is most interested in. However, at present, this technology is centered on increasing the efficiency of the module itself so it has lots of problems to be applied to buildings. Application of the integrated PV system in building external curtain wall can obtain much more generation of electric power than in roof-types whose area for installation is restricted, so it is excellent in terms of its possibility of application. Therefore, this paper intends to advance its practical use by proposing how to get integrated PV system which can be applied to building external curtain wall, and how to apply it.

• 대한기계학회논문집A
• /
• 제30권1호
• /
• pp.60-65
• /
• 2006

The present paper provides experimental J estimation equation for the circumferential through-wall cracked pipe under four-point bending, based on the load-crack opening displacement (COD) record. Based on the limit analysis and the kinematically admissible rigid-body rotation field, the plastic ${\eta}$-factor for the load-COD record is derived and is compared with that for the load-load line displacement record. Comparison with the J results from detailed elastic-plastic finite element (FE) analysis shows that the proposed method based on the load-COD record provides reliable J estimates even for shallow cracks, whereas the conventional approach based on the load-load line displacement record gives erroneous results for shallow cracks. Thus, the proposed J estimation method could be recommended for testing the circumferential through-wall cracked pipe, particularly with shallow cracks.

• Pediatric Infection and Vaccine
• /
• 제4권1호
• /
• pp.167-173
• /
• 1997

Acute infectious mononucleosis, caused by Epstein-Barr virus(EBV), is a self limited lymphoproliferative illness that is common in adolescents and young adults. It shows many complications in multiple organ systems, but the hepatobiliary and the respiratory complication is uncommon. We report a case with thickened gallbladder wall and pneumonia as complications of acute infectious mononucleosis in a child. Also the related literature were reviewed. A 4 year old boy presented with a history of high fever, cough, and abdominal distension for 20days. Physical Examination revealed audible crackles in whole lung field and gross hepatomegaly. Chest X-ray showed pneumonia and liver function tests were abnormal. Ultrasonography and computed tomography revealed a thickened gallbladder wall and hepatosplenomegaly. The diagnosis of primary Epstein-Barr viral infection was eventually made by specific serologic tests. The patients's fever subsided 6 weeks later and pneumonia was recovered around this time. Liver function tests returned near normal 2 months later and ultrasonography of gallbladder was normal at this time.

• Journal of the Korean Wood Science and Technology
• /
• 제21권1호
• /
• pp.39-50
• /
• 1993

The purpose of this study was to describe the micromorphological changes in Korean red pine (Pinus densiflora S. et Z.) wood decayed by a major brown-rot fungus, Lentinus lepideus, using scanning electron microscope and transmission electron microscope. At the end of the 12-week exposure to the fungus in soil block procedure(ASTM 1971), test blocks sustained 5.02% weight loss. The formation of bore hole by hyphae and penetration of hyphae through bordered pit were not observed. Instead, fungal hyphae appeared to penetrate axially tracheid luminar from the the ray cells via cross field pits. Hyphae were mainly found in lignin rich cell corner regions of tracheids, and also extensive degradation of tracheid wall occurred in this region. Extensive degradation of $S_2$ layer occurred without noticeable alteration of the $S_3$ layer, but warty layer and compound middle lamella remained relatively intact. Localized erosion, the characteristic of white rot, was observed in some cell wall and wall components including lignin were found to be decomposed.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.114-123
• /
• 2017

This paper introduces a novel obstacle-climbing robot that moves on the facade of buildings and its climbing mechanism. A winch system set on the top of the building makes the vertical motion of the robot while it climbs obstacles that protrude from the wall surface. The obstacle-climbing robot suggested in this research is composed of a main platform and three modular climbing units. Various sensors installed on each climbing unit detect the obstacles, and the robot controller coordinates the three units and the winch to climb the obstacles using the obstacle-climbing mechanism. To evaluate the performance of the developed robot prototype, a test bed, which consists of an artificial wall and an obstacle, was manufactured. The obstacle size and the time required to climb the obstacle were selected as the performance indices, and extensive experiments were carried out. As a result, it was confirmed that the obstacle-climbing robot can climb various-sized obstacles with a reasonable speed while it moves on the wall surface.

• Journal of Microbiology and Biotechnology
• /
• 제12권2호
• /
• pp.183-188
• /
• 2002

The ohmic heating of foods for sterilization provides a shorter come-up time compared to conventional thermal processes. The electric fields as well as the heat generated by ohmic heating facilitate germicidal effects. In the present study, the effect of ohmic heating on the structure and permeability of the cell membrane of yeast cells, Saccharomyces cerevisae, isolated from Takju (a traditional Korean rice-beer), was investigated. The ohmic heating was found to translocate intracellular protein materials out of the cell wall, and the amount of exuded protein increased significantly as the electric field increased from 10 to 20 V/cm. As higher frequencies were applied, more materials were exuded. Compared to conventional heating, more amounts of proteins and nucleic acids were exuded when these cells were treated with ohmic heating. The molecular weights of the major exuded proteins ranged from 14 kDa to 18 kDa, as analyzed by Tricine-SDS PAGE. A TEM study also confirmed the leakage of cellular materials, thus indicating irreversible damage to the cell wall by ohmic heating. It was, therefore, concluded that the electric fields generated by ohmic heating induced electroporation, causing irreversible damage to the yeast cell wall and promoting the translocation of intracellular materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.237-242
• /
• 2001

The stochiometric mix of evaporating materials for the CuGaSe$_2$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CuGaSe$_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were 610$^{\circ}C$ and 450$^{\circ}C$, respectively The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the CuGaSe$_2$ single crystal thin film, we have found that the values of spin orbit splitting Δ So and the crystal field splitting ΔCr were 91 meV and 249.8 meV at 20 K, respectively. From the Photoluminescence measurement on CuGaSe$_2$ single crystal thin film, we observed free excition (Ex) existing only high quality crystal and neutral bound exiciton (D$^{\circ}$,X) having very strong peak intensity. Then, the full-width-at-half-maximum(FWHM) and binding energy 7f neutral acceptor bound excision were 8 meV and 35.2 meV, respectivity. By Haynes rule, an activation energy of impurity was 355.2 meV