• 한국콘텐츠학회논문지
• /
• 제9권3호
• /
• pp.250-255
• /
• 2009

본 연구는 경남 김해지역내의 병원에서 사용되고 있는 진단용방사선발생장치 중 일반촬영용장비 40대를 X선관 가변조리개 성능검사와 광조사야와 실제 X선조사야면의 일치검사 및 초점과 가변조리개의 중심선속 일치검사를 통해 장비의 성능을 평가 조사하여 다음과 같은 결과를 얻을 수 있었다. 1. 가변조리개 성능검사에서 최대X선조사야시험 결과는 부적절한 장비가 4대(10%), 최소X선조사야시 험결과에서는 5대(12.5%)로 나타났다. 2. 광조사야와 X선조사야일치시험 결과에서는 최대허용치인 2%이내가 23대(57.5%), 2%이내를 벗어난 장비가 17대(42.5%)로 나타났다. 3. 중심선속 일치시험 결과에서는 완전일치가 11대(27.5%), $0.5^{\circ}$이내로 벗어난 경우는 11대(27.5%), $0.6^{\circ}-1.5^{\circ}$이내가 10대(25%), $1.6^{\circ}-3^{\circ}$이내가 7대(17.5%), $3^{\circ}$이상인 경우가 1대(2.5%)로 나타났다. 결론적으로 가변조리개 중 일부가 기준치에 떨어진 성능상태에서 사용하고 있었으며, 광조사야와 X선 조사야일치상태 및 중심선속 일치에서도 최대허용치를 벗어난 상태에서 상당수의 장비를 사용하고 있었다. 그러므로 피검자의 방사선 피폭을 최소화하고 영상의 질을 향상시키기 위해서는 주기적이고 지속적인 점검평가를 거쳐 노후화 되었거나 부족한 성능상태의 기기를 수리, 보완해야함을 알 수 있었다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.229-235
• /
• 2004

This paper treats accelerated life tests for automotive connector. The contact resistance of connector is explained by some factors; the use time(calender time, real cycle), stresses and loads adapted in auto test. The relationships between contact resistance and some factors are compared and analyzed by regression models in various test conditions; field use-environment, manufacturer's test environment, and accelerated test condition. The consistency between of manufacturer's test and field test is examined. Finally, the future study on accelerated test for automotive connector is presented.

• 한국군사과학기술학회지
• /
• 제21권6호
• /
• pp.767-775
• /
• 2018

To develop and check a Radar Processor Unit, checking the function and performance of the requirement is very important factor in developing Radar. General methods for verifying the Radar is simulation test, environment linkage test and field operation test, firstly, in case of requirement analysis phase, verify Radar algorithm and design by using mathematical method based simulation test method, and secondly, in case of unit test and integrated test phase, Test Equipment is set to simulate radar environment in the lab to verify radar function and performance. Lastly, field operation test phase is carried out to confirm the function and performance after it is mounted on the actual equipment. To successfully develop Radar Processor Unit, using the method of field operation test method after sufficient test cases are tested in radar environmental interlocking method in order to save cost and testing period and because of this reason, development of the Radar Processor Unit Test Equipment is becoming very important factor. In this paper, we introduce the concept of test equipment development and important factors in test equipment, which are target simulation, data processing and device interlocking.

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1032-1036
• /
• 2019

When the equipment which is related to safety or important to power production is installed in nuclear power plant units (NPPs), verification of equipment Electromagnetic Susceptibility (EMS) must be performed. The low-frequency radiated magnetic field susceptibility (RS101) test is one of the EMS tests specified in U.S NRC (Nuclear Regulatory Commission) Regulatory Guide (RG) 1.180 revision 1. The RS101 test verifies the ability of equipment installed in close proximity to sources of large radiated magnetic fields to withstand them. However, RG 1.180 revision 1 allows for an exemption of the low-frequency radiated magnetic susceptibility (RS101) test if the safety-related equipment will not be installed in areas with strong sources of magnetic fields. There is no specific exemption criterion in RG 1.180 revision 1. EPRI TR-102323 revision 4 specifically provides a guide that the low-frequency radiated magnetic field susceptibility (RS101) test can be conservatively exempted for equipment installed at least 1 m away from the sources of large magnetic fields (>300 A/m). But there is no exemption criterion for equipment installed within 1 m of the sources of smaller magnetic fields (<300 A/m). Since some types of equipment radiating magnetic flux are often installed near safety related equipment in an electrical equipment room (EER) and main control room (MCR), the RS101 test exemption criterion needs to be reasonably defined for the cases of installation within 1 m. There is also insufficient data regarding the strength of magnetic fields that can be used in NPPs. In order to ensure confidence in the RS101 test exemption criterion, we measured the strength of low-frequency radiated magnetic fields by distance. This study is expected to provide an insight into the RS101 test exemption criterion that meets the RG 1.180 revision 1. It also provides a margin analysis that can be used to mitigate the influence of low-frequency radiated magnetic field sources in NPPs.

• 한국컴퓨터정보학회논문지
• /
• 제26권9호
• /
• pp.37-47
• /
• 2021

본 논문에서는 U-네트에서 수용 영역을 다양화하여 기존의 모델보다 정확도가 개선된 새로운 혀 영역 분할을 위한 딥러닝 모델을 제안한다. 수용 영역 다양화를 위하여 병렬 컨볼루션, 팽창된 컨볼루션, 상수 채널 증가 등의 방법을 사용하였다. 제안된 딥러닝 모델에 대하여, 학습 영상과 테스트 영상이 유사한 TestSet1과 그렇지 않은 TestSet2의 두 가지 테스트 데이터에 대해 혀 영역검출 실험을 진행하였다. 수용 영역이 다양화됨에 따라 혀 영역 분할 성능이 향상되는 것을 실험결과에서 확인할 수 있었다. 제안한 방법의 mIoU 값은 TestSet1의 경우 98.14%, TestSet2의 경우 91.90%로 U-net, DeepTongue, TongueNet 등 기존 모델의 결과보다 높았다.

• 한국작물학회지
• /
• 제59권3호
• /
• pp.341-349
• /
• 2014

경실로 인해 다른 두과작물에 비해 포장 입묘가 불량한 팥의 포장출현율의 효과적인 예측 방법을 개발하기 위해 인위로 노화 정도를 조절한 종자에 대해 실험실에서 몇 가지 종자세 검사를 실시하여 포장출현력과 비교하였다. 얻어진 종자세 지표들에 대해 포장출현력과의 상관분석을 통해 예측을 위한 효율적인 지표들을 도출하였다. 팥에서 종자세가 높을 경우에는 표준발아검사에서의 종자활력률이 포장출현력 예측에 효과적이며, 약간 노화된 종자의 경우에는 저온발아검사(CGT)에서의 비정상묘율과 배축의 길이는 포장출현력과 높은 상관관계를 보였으며, 전기전도도와 CSVT에서의 활력률과 테트라졸리움 검사에서 종자세와 예측발아율은 포장출현력과 5% 수준에서 상관관계가 인정되었다. 종자세가 낮은 종자에서는 CSVT에서 불발아종자율이 포장출현력과 5% 수준에서 상관을 보였다. 포장출현력 예측에 효과적인 몇 가지 종자세지수를 이용하여 stepwise multiple regression 분석을 실시한 결과 테트라졸리움(TZ) 검사에서의 예측발아율은 결정계수($R^2$)가 0.820으로 포장출현력 예측에 가장 효과적인 검사방법임을 알 수 있었다. 표준발아검사(SGT)에서의 종자활력률, 저온발아검사(CGT)에서의 정상묘율과 건물중을 회귀방정식에 추가함에 따라 86.9% 까지 포장출현력 예측효율을 증가시킬 수 있었다.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.180-184
• /
• 2012

3-way ball valves have been mostly used for high temperature/high pressure valves using in petrochemical carriers and oil tankers, which requires high quality products with confidentiality and durability. As a larger disaster may be generated by leakage of oil or gas from valves, thus the present research applied a numerical analysis method with thermal-structural coupled field analysis and the performance test. The Max stress by parts was confirmed through thermal-structural coupled field analysis and develop the 3-way ball valve design, which is safe on operating condition. And its performance was verified by carrying out pressure test, leakage test and durability test for the manufactured 3-way ball valves with satisfying it's regulations.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.86-89
• /
• 2004

Recently polymer arresters are being used widely but we don't have appropriate long term characteristics test methods. Therefore we need to develop special test facility to evaluate long term reliability of polymer arresters. It's polymeric housing can be degraded by environmental stress and the interface between housing and inner module can be affected by moisture absorption. This moisture absorption can cause leakage current and tracking in the interface. We developed multi stress accelerated ageing test facility to simulate field conditions including UV, temperature, humidity, voltage, salt fog and rain. In addition, we carried out field exposure test at the outdoor test yard and characteristics analysis of field operated specimens to evaluate accelerating factor of this accelerated aging test.

• 한국지반공학회논문집
• /
• 제19권2호
• /
• pp.135-146
• /
• 2003

본 논문에서는 지반의 전단파 속도 주상도를 획득하기 위한 현장 시험법으로 표준관입시험 샘플러를 가진원으로 이용한 업홀 시험기법을 연구하였다. 제안된 업홀 시험은 지표면에 여러 개의 속도계를 시추 장비로부터 일정한 간격으로 한 줄로 배치를 하고 표준관입시험의 시료 채취기로부터 발생되는 진동원의 신호를 계측하여 지반의 전단파속도 주상도를 도출하는 방법이다. 여러 선행 실험을 통하여 확립된 업홀 시험 방법 및 결과 분석법에 대해 소개하였다. 진동원과 감지기간의 거리가 멀기 때문에 지반에서 진행되는 전단파의 진행 경로는 지반의 강성 변화에 근거한 굴절 경로를 적용하였다. 국내 3개 시힘 부지에서 수행한 업홀 시힘결과를 동일 부지에서 행한 다운홀, SASW시험 및 SPT-N치와 비교하여 봄으로써 제안된 업홀 시험의 현장 적용성을 확인하였다.

• Geomechanics and Engineering
• /
• 제11권5호
• /
• pp.625-638
• /
• 2016

This paper presents field study and numerical modeling results for a single-cell low-fill concrete box culvert under a flexible pavement subjected to traffic loading. The culvert in the field test was instrumented with displacement transducers to capture the deformations resulting from different combinations of static and traffic loads. A low-boy truck with a known axle configuration and loads was used to apply seven static load combinations and traffic loads at different speeds. Deflections under the culvert roof were measured during loading. Soil and pavement samples were obtained by drilling operation on the test site. The properties of the soil and pavement layers were determined in the laboratory. A 3-D numerical model of the culvert was developed using a finite difference program FLAC3D. Linear elastic models were used for the pavement layers and soil. The numerical results with the material properties determined in the laboratory were compared with the field test results. The observed deflections in the field test were generally smaller under moving loads than static loads. The maximum deflections measured during the static and traffic loads were 0.6 mm and 0.41 mm respectively. The deflections computed by the numerical method were in good agreement with those observed in the field test. The deflection profiles obtained from the field test and the numerical simulation suggest that the traffic load acted more like a concentrated load distributed over a limited area on the culvert. Elastic models for culverts, pavement layers, and surrounding soil are appropriate for numerical modeling of box culverts under loading for load rating purposes.