• 한국항해항만학회지
• /
• 제28권9호
• /
• pp.815-820
• /
• 2004

In this paper, after analyzing other models with their advantages and disadvantages, we proposed a simple parametric model for calculating wind speed & direction and wave height & direction at any location around the typhoon at sea. The proposed wind-field model of typhoon is asymmetric, and consists of a circular symmetric wind-field caused by the pressure gradient of stationary typhoon and a moving wind-field caused by the movement of typhoon. By verifying this model through observed data, we found that it is accurate enough to develop the simulation software for training students and seafarers so as to take appropriate actions while being faced with the typhoon at sea.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.515-518
• /
• 2002

In this study, the ellipsoidal cap type magnetic pole structure was proposed for the electro-magnet in B-H curve tracer. From the simulation for the electro-magnet without specimen, the area of effective uniform field(99% range for the central field value) was considerably increased in case of the newly proposed ellipsoidal cap type magnetic pole than that of the conventional simple-inclined cap type magnetic pole. Also, through the simulation for the electro-magnet with permanent magnet specimen(NaFe30), the optimal Positions of the magnetic field measurement sensor(Hall sensor) were found out in each case and the errors were decreased in case of the newly proposed ellipsoidal cap type magnetic pole.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.100-100
• /
• 2010

Because of power consumption increase, global wanning, and limitation of installation, not only high reliability and interruption capability but also compact and light power apparatuses are needed. To improve the insulation performance, the high E field concentration phenomena was considered. Breakdown mechanism in vacuum is different from that in other insulation materials. therefore, It is necessary to understand the electric field distribution and insulation characteristics. This paper discusses the simulation and LI(light impulse) test of the shield of outside vacuum interrupter As a result, FEM simulation and LI test show that improve distribution of electrical field and equi-potential line. due to external shield. in this case, outside shield induced electric field of triple junction point.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.100-105
• /
• 1997

3-dimensional finite element mehtod (FEM) elecrical field analysis was performed to obtain electric fields on a field emission display (FED) tip in an array form. Because, unlike a single tip structure, there is no azimuthal symmetry for a tip aary, 3D analysis is necessary. To reduce memory requriement the simulatio was performed by applying the neumann boundary condition to the intermediate plane between tips to take the effect of the array on the electric field into account and corresponding current was calculated. To verify our algorithm, comparison between simulation resutls and experimental data from another paper was made and the difference was discussed.

• 한국전기전자재료학회논문지
• /
• 제16권10호
• /
• pp.908-913
• /
• 2003

We have performed computer simulation to obtain electro-optic characteristics of reflective hybrid aligned nematic liquid crystal displays (LCDs) driven by fringe field. The results show that the optimal retardation value (dΔn) of the cell is 0.289 ${\mu}$m, which allows for the cell to have a practical cell gap of larger than 3 ${\mu}$m when manufacturing. A reflectance of the dark state is only 0.114 % for an incident light 550 nm. At this condition, the light efficiency of white state reaches 92.7 %. The display with optimized cell parameters shows that the contrast ratio greater than 5 exists over 600 of polar angle in all directions and lower driving voltage than that of fringe-field driven homogeneously aligned reflective LCD.

• 전자공학회논문지B
• /
• 제31B권8호
• /
• pp.109-118
• /
• 1994

We proposed new field/frame mode selection quantization and buffer control strategy for interlaced digital HDTV image coding system. The field/frame mode selection is performed based on the mean square error and number of generated bits for each superblock. The quantization factor for each superblock is determined by the characteristics of human visual system and buffer status. The statistical characteristics of the number of generated bits for basis block and the prediction of buffer status are used for buffer control. Simulation results show that the proposed field/frame mode selection and rate buffer control. Simulation results show that the proposed field/frame mode selection and rate buffer control strategy have good subjective image quality and have stable buffer status.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.421-426
• /
• 2019

The directivity of an underwater sound source should be measured in an acoustically open field such as a calm sea or lake, or an anechoic water tank facility. However, technical difficulties arise when practically implementing this in open fields. Signal processing-based techniques such as a sound intensity method and near-field acoustic holography have been adopted to overcome the problem, but these are inefficient in terms of acquisition and maintenance costs. This study established a simple directivity estimation technique with data acquisition, filtering, and analysis tools. A numerical simulation based on an acoustic radiosity method showed that the technique is practicable for sound source directivity estimation in a diffused reverberant acoustic field like a reverberant water tank.

• 한국시뮬레이션학회논문지
• /
• 제20권3호
• /
• pp.101-109
• /
• 2011

국방 분야에서의 M&S는 무기 체계 획득 및 개발에 투입되는 비용, 시간, 노력 및 위험을 감소하기 위한 전투 효과 실험 등에 사용되며 그 중요성이 높아지고 있다. 국방 M&S에서 시뮬레이션 모델은 묘사수준에 따라 전구급, 임무급, 교전급, 공학급 모델로 분류할 수 있는데, 그 중 교전급 모델은 다양한 자원들을 가상의 전장환경에 투입하여 시뮬레이션을 수행하며, 이것을 통하여 사용자들이 예측 불가능한 국지 전장에서의 많은 상황들에 대하여 다각적인 시야로 전술을 고려할 수 있게 하는 역할을 한다. 이런 교전급 시뮬레이션을 개발할 때, 에이전트 기반 시뮬레이션 개념을 도입하면 개체의 향상된 자율성, 조합성 및 재사용성을 가질 수 있다. 그것은 시뮬레이션 모델의 개발에 소요되는 시간, 비용 및 노력을 절감할 수 있음을 의미한다. 본 논문은 쿠가 아키텍처를 활용하여 다중 에이전트 기반의 교전급 시뮬레이션 프레임워크를 설계하는데 그 목적을 둔다.

• 농업과학연구
• /
• 제43권1호
• /
• pp.116-126
• /
• 2016

The objective of this study is to predict the fuel efficiency of an agricultural tractor. The fuel efficiency of the tractor during rotary tillage was predicted using numerical modeling. A numerical model was developed using Simulation X. Based on tractor power flow, numerical modeling consisted of an engine, transmission, PTO (power take off), and hydraulics. The specifications of major components utilized in the numerical model were the same as those of a 71 kW tractor (field test tractor). The load that was inputted for fuel efficiency prediction into the simulation model was obtained from a field test. Fuel efficiency predictions were conducted by comparing field test results and simulation results. In addition, it was performed by dividing the rotary tillage and steering section. Main results are as follows: first, t-values of engine torque were measured to be 0.31 in the rotary tillage and 0.92 in the steering section. Second, t-values of fuel consumption were measured to be 0.51 and 5.41 in the rotary tillage and the steering section, respectively. Finally, t-values of fuel efficiency were measured to be 1.72 and 40 in the rotary tillage and the steering section, respectively. The results show no significant differences with t-values of less than 5% in the rotary tillage. But, it shows significant differences in the steering section. Therefore, simulation for accurate fuel efficiency prediction requires a suitable algorithm or detailed design of the simulation model in the steering section.

• 지구물리와물리탐사
• /
• 제16권2호
• /
• pp.97-105
• /
• 2013

자기공명검층은 수소와 자기장의 상호작용을 측정, 분석하는 물리검층 방법으로 이는 저류층 평가를 위한 중요한 물리검층 방법 중 하나이다. 측정된 감쇠 신호 즉, 이완은 측정지역 내 수소의 밀도에 대한 정보와 유체의 종류에 따른 감쇠속도에 대한 정보를 포함하고 있으며, 이를 바탕으로 공극률, 투과도와 습윤도 등을 예측할 수 있다. 1950년대 초반 랜덤워크로 자기공명의 이완감쇠를 시뮬레이션한 것을 시작으로 자기공명반응에 대한 연구가 급격히 발전되었다. 이 논문에서는 자기공명 시뮬레이션의 연구 동향을 먼저 살펴 보고, 자기공명반응인 이완을 발생시키는 이완메커니즘에 대해 간단히 알아본다. 이에 기초하여 자기공명검층에서 주로 측정하는 횡축이완곡선을 자기장구배를 고려하는 경우와 고려하지 않는 시뮬레이션 방법에 대해 비교분석하고 자기장구배가 이완메커니즘 및 횡축이완곡선에 미치는 영향에 대해 분석한다.