• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.589-596
• /
• 2002

In this study, static pile load tests with load transfer measurement were accomplished in the field. Yield pile capacity (or ultimate pile capacity) determined by load-settlement-time relationship was determined and axial load transfer behavior was analyzed. In the test for the four test piles were behaved as end bearing pile but ratios of skin friction to total pile capacity were 27%∼33%.

• Structural Engineering and Mechanics
• /
• 제82권1호
• /
• pp.69-79
• /
• 2022

This paper discusses the field testing of two single-span double-tee girder (DTG) bridges in South Dakota to determine live load distribution factors (LLDFs) and the dynamic load allowance (IM). One bridge had seven girders and another had eight girders. The longitudinal girder-to-girder joints of both bridges were deteriorated in a way that water could penetrate and the joint steel members were corroded. A truck traveled across each of the two bridges at five transverse paths. The paths were tested twice with a crawl speed load test and twice with a dynamic load. The LLDFs and IM were determined using strain data measured during the field tests. These results were compared with those determined according to the AASHTO Standard and the AASHTO LRFD specifications. Nearly all the measured LLDFs were below the AASHTO LRFD design LLDFs, with the exception of two instances: 1) An exterior DTG on the seven-girder bridge and 2) An interior DTG on the eight-girder bridge. The LLDFs specified in the AASHTO Standard were conservative compared with the measured LLDFs. It was also found that both AASHTO LRFD and AASHTO Standard specifications were conservative when estimating IM, compared to the field test results for both bridges.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 가을 학술발표회 논문집
• /
• pp.132-141
• /
• 1995

This study is intended to propose practical but systematic and rational approaches for proof load test and integrity assessment of segmental PC box-girder bridges. The proposed models cover the whole range of field tests and assessment of such as inspections, nondestructive tests, static and dynamic load tests, structural analysis, and integrity assessment for the evaluation of load carrying capacity, serviceability, and durability of PC box-girder bridges. They are applied to a newly constructed precast segmental PC box-girder bridge which is a part of the Seoul interior circuit elevated expressway.

• 한국콘텐츠학회논문지
• /
• 제20권11호
• /
• pp.669-675
• /
• 2020

본 연구에서는 헬리컬파일의 지지력 특성 규명을 위하여 현장재하시험을 통하여 얻은 실측 지지력과 이론식에 의해 산정된 예측 지지력을 비교 분석하였다. 헬리컬파일은 중공형 축에 중공형 축보다 직경이 큰 하나 혹은 다수의 나선형 원판을 부착시킨 형상의 파일이다. 헬리컬파일은 굴삭기에 부착된 회전관입기를 사용하여 파일을 지반에 회전 관입시키기 때문에 항타와 굴착이 필요한 다른 말뚝에 비해 소음이 작고, 비교적 소형 장비로 시공이 가능하여 공간이 협소한 도심지에서도 시공이 용이하다. 최근 들어 헬리컬파일을 적용한 기초 공법의 설계와 시공이 많이 실시되고 있으나 헬리컬파일의 지지력에 관한 연구는 설계와 시공 사례에 비하여 아직 미진하다. 현장재하시험은 이음부, 헬리컬파일의 규격, 재하시험의 종류, 그라우팅 실시 여부를 변수로 총 10회 실시하였다. 이론식에 의한 말뚝의 예측 지지력은 Individual bearing method와 Cylindrical shear method을 통하여 산정하였다.

• Journal of Biosystems Engineering
• /
• 제32권3호
• /
• pp.190-196
• /
• 2007

The purpose of this study is to develop a measurement system of cutter conditions for combine header diagnosis during rice harvesting. A load cell was installed at the locker-arm to measure load fluctuation and an acceleration senor was used to monitor vibration signal of cutter bar. The data were collected from a paddy field during harvesting. The tests were conducted with a normal cutter, a loosened cutter, a broken cutter, and a worn-out connecter pin at the field. The vibration signals converted by FFT (Fast Fourier Transformation), filtered, and normalized. The load data and peak values of vibration signals in four different frequency ranges were used to determine the cutting operation and the cutter conditions of combine. The multiple comparison tests showed that the load data and peak values of vibration signals were important to monitor the cutting operation and cutter conditions of combine header.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.183-190
• /
• 2000

Effective range of Hydraulic Hammer Compaction was studied by numerical analysis instead of empirical method. Numerical analyses were carried out with commercial FEM code, ABAQUS, and verified by comparing the numerical results with field tests of Hydraulic Hammer Compaction. Most of material properties were evaluated by data from laboratory and in-situ tests. Vertical effective range was estimated by distribution curve of plastic strain energy dissipated through soil layers under dynamic load and these results were in good agreement with field tests. Based on verification, the effects of governing properties of Hydraulic Hammer Compaction such as number of hit can be determined by numerical analyses. In addition, vertical effective range can also be determined by Menard's empirical equation using the external work at converging time of plastic strain energy in numerical analysis. This implies that the minimum energy of Hydraulic Hammer Compaction for improvement can be determined by Menard's equation.

• 한국지반환경공학회 논문집
• /
• 제18권7호
• /
• pp.37-47
• /
• 2017

본 연구에서는 강관매입말뚝의 하중-침하 및 전단응력 전이 특성을 분석하기 위하여 시험시공 및 수치해석을 수행하였다. 동재하시험 및 정재하시험을 수행한 결과 EOID 및 Restrike 시험을 통해 평가된 말뚝의 설계지지력은 정재하시험에서 평가된 설계 지지력에 비해 각각 약 56~105% 및 65~121%의 범위를 보였으며, 말뚝재하시험 이전에 수행된 Class-A type 수치해석의 경우 38~142%의 범위를 보였다. 또한 Restrike 시험에서 평가된 설계지지력은 EOID 시험의 설계지지력에 비해 12~60% 증가된 것으로 평가되었다. EOID에서는 선단지지력이 크게 측정되는 데 비해, Restrike 시험에서는 주면마찰력이 크게 측정되었는데 Restrike 시험의 타격에너지가 충분하지 않은 경우 말뚝의 선단지지력이 과소평가될 가능성이 있는 것으로 분석되었다. 본 연구의 분석에 의하면 동재하시험을 통해 말뚝의 지지력을 합리적으로 평가하기 위해서는 주면지지력은 Restrike 시험 결과를, 선단지지력은 EOID 시험 결과를 적용하는 것이 합리적인 것을 알 수 있었다. 정재하시험 실측값과 수치해석으로부터 예측된 하중-침하 관계는 탄성범위까지는 어느 정도 유사하지만 항복이 발생한 이후의 거동은 크게 벗어났다. 즉 실측값은 항복 이후 경화현상이 거의 없이 마치 탄성-완전소성(elastic-perfectly plastic) 재료와 유사하게 파괴에 도달되는 반면에, 수치해석에서는 변형경화(strain hardening)과정을 거치면서 파괴에 점진적으로 도달되는 경향을 보였다. 말뚝의 하중-침하 특성은 지반의 강성에 영향을 받으며, 축력분포는 지반의 전단 강도상수에 영향을 받는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1117-1124
• /
• 2008

In This paper, load-settlement curves that obtained from 11 sites were analyzed. At all tests, the load is applied until apparent failure is observed. The validity of the ultimate and yield load estimation method and load calculated from the settlement criterion was investigated through comparison with the measured data. The result indicated that B. Hansen 80% criterion and Stability Plot in ultimate loading decision law almost have been regared as same by comparing measured date and ultimate bearing capacity decided in depending yield loading decision law from 13% to 46% difference have taeyaeen came out when measured data and Davisson was compared, and S-log t from 5% to 41% log P-log S from 14% to 50% difference have been came out. When Settlement standard and measured data was compared difference had been came out about 3% in total settlement 0.1D criterion and from 12% to 35% difference had been came out in net settlement.

• 한국농공학회논문집
• /
• 제60권4호
• /
• pp.105-111
• /
• 2018

Institutional inertia anti-disaster standard was presented mainly on the upper surface, it is necessary to improve to the soil type standard and uplift the resistance standard greenhouse that are vulnerable to strong winds. In this study, we carried out a field test using the load control method in order to evaluate the uplift resistance of continuous foundation of greenhouse with different depths of the rafters. Institutional inertia anti-disaster standard of greenhouse foundation did not protect the greenhouse structure from the damages caused by strong winds and heavy snow. Therefore, field tests for behavior characteristics of continuous greenhouse foundation were carried out to ensure stable facility cultivation. The field test condition was evaluated using different embedded depth as follows: 30cm, 40cm, 50cm and spacing 50cm, 60cm, 70 cm. As a result of the uplift resistance field tests using the load control method, the minimum uplift resistance was found to be over 90kg and uplift resistance displacement was 9.4mm. Uplift resistance of the continuous greenhouse foundation was in the range of 90-180 kg according to embedded depth and spacing. Using the test condition, there was no constant trend in the uplift resistance.

• Coupled systems mechanics
• /
• 제12권2호
• /
• pp.167-181
• /
• 2023

The determination of the blast protection level and the corresponding minimum load-bearing capacity for a laminated glass (LG) window is of crucial importance for safety and security design purposes. In this paper, the focus is given to the window response under near-field blast loading, i.e., where relatively small explosives would be activated close to the target, representative of attack scenarios using small commercial drones. In general, the assessment of the load-bearing capacity of a window is based on complex and expensive experiments, which can be conducted for a small number of configurations. On the other hand, nowadays, validated numerical simulations tools based on the Finite Element Method (FEM) are available to partially substitute the physical tests for the assessment of the performance of various LG systems, especially for the far-field blast loading. However, very little literature is available on the LG window performance under near-field blast loads, which differs from far-field situations in two points: i) the duration of the load is very short, since the blast wavelength tends to increase with the distance and ii) the load distribution is not uniform over the window surface, as opposed to the almost plane wave configuration for far-field configurations. Therefore, the current study focuses on the performance assessment and structural behaviour of LG windows under near-field blasts. Typical behavioural trends are investigated, by taking into account possible relevant damage mechanisms in the LG window components, while size effects for target LG windows are also addressed under a multitude of blast loading configurations.