• 한국광학회지
• /
• 제8권5호
• /
• pp.372-376
• /
• 1997

시분해 반스톡스 라만 분광법에서 펌프광과 스톡스광의 상관관계에 대한 의존성을 계산하였다. 시간 지연된 두 펌프광을 라만 매질에 입사시키면 하나의 펌프광에 발생된 스톡스광과 펌프광들의 결합에 의해 반스톡스광 신호를 얻을 수 있는데 지연시간에 따른 반스톡스광 신호의 규격화된 크기를 계산하였다. 매질의 라만 선폭이 레이저의 선폭 보다 매우 작지 않을 때에는 스톡스광이 펌프광과 완전한 상관관계를 갖지 못하므로 일반적인 매질에서 발생된 스톡스광과 펌프광의 상관관계에 대해 간단한 모델을 세우고 그 매개변수에 따른 신호의 변화를 계산하였다. 일반적으로 비선형 라만 실험에서는 선폭이 넓은 광원을 사용하므로 파동들을 chaotic field로 기술하여 계산을 하였으며 여러 가지 매질의 선폭에 대해 그 결과들을 비교하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 Proceedings of 5th International Joint Symposium on Microeletronics and Packaging
• /
• pp.109-109
• /
• 2000

Recently, carbon nanotube has been investigating for field emission display ( (FED) applications due to its high electron emission at relatively low electric field. However, the growing of carbon nanotube generally requires relatively high temperature processing such as arc-discharge (5,000 ~ $20,000^{\circ}C$) and laser evaporation (4,000 ~ $5,000^{\circ}C$) methods. In this presentation, low temperature growing of carbon nanotube by plasma enhanced chemical vapor deposition (PECVD) using nickel catalyst which is compatible to conventional FED processing temperature will be described. Carbon n notubes with average length of 100 run and diameter of 2 ~ $3\mu$ill were successfully grown on silicon substrate with native oxide layer at $550^{\circ}C$using nickel catalyst. The morphology and microstructure of carbon nanotube was highly depended on the processing temperature and nickel layer thickness. No significant carbon nanotube growing was observed with samples deposited on silicon substrates without native oxide layer. This is believed due to the formation of nickel-silicide and this deteriorated the catalytic role of nickel. The formation of nickel-silicide was confirmed by x-ray analysis. The role of native oxide layer and processing parameter dependence on microstructure of low temperature grown carbon nanotube, characterized by SEM, TEM XRD and R없nan spectroscopy, will be presented.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.1-5
• /
• 2016

Field and temperature dependence of the critical current density, Jc, were measured for both un-doped and carbon doped $MgB_2/Nb/Monel$ wires manufactured by Hyper Tech Research, Inc. In particular, carbon incorporation into the $MgB_2$ structure using malic acid additive and a chemical solution method can be advantageous because of the highly uniform mixing between the carbon and boron powders. At 4.2 K and 10 T, Jc was estimated to be $25,000-25,300Acm^{-2}$ for the wire sintered at $600^{\circ}C$ for 4 hours. The irreversibility field, $B_{irr}$, of the malic acid doped wire was approximately 21.0 - 21.8 T, as obtained from a linear extrapolation of the J-B characteristic. Interestingly enough, the Jc of the malic acid doped sample exceeds $10^5Acm^{-2}$ at 6 T and 4.2 K, which is comparable to that of commercial Nb-Ti wires.

• 대한간호학회지
• /
• 제37권7호
• /
• pp.1119-1130
• /
• 2007

Purpose: This study was done to develop the concept of grief focusing on the process of spousal bereavement in Korea. Methods: The Hybrid model was used for analysis according to the 3 phases. An extensive literature review was done for the Theoretical phase. In-depth interviews were conducted with 15 participants whose spouses died within the past 3 years in the Field phase. In the Final analytic phase, the results in the Theoretical and the Field phases were compared, analyzed, and integrated according to the process of grief. Results: The antecedent of the concept of spousal grief was spousal death. The dimensions of grief were classified to inner dimensions related to oneself, relational dimensions related to family and others, and existential dimensions related to the meaning of being. The attributes of grief were physical suffering, decline of cognitive ability, heartbreaking sorrow, expectations and conflicts of a new life, social stigma, dependence on or resentment towards God, etc. The empirical referent of grief was physical, psychological, social, and spiritual health status. The grieving progressed through 3 phases-shock-emancipation, suffering, and integration. Conclusion: Nurses should recognize the importance of their unique position as supporters for grievers, and try to assess individual characteristics and to provide tailored nursing interventions.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.572-583
• /
• 2016

In view of the speed control characteristics of induction traction motors and the problems of direct torque control (DTC) algorithms in current applications, this paper presents a DTC algorithm characterized by a symmetrical polygon flux control and a closed loop power control in the constant-torque base speed region and constant-power field-weakening region of induction traction motors. This algorithm only needs to add a stator flux control algorithm to the traditional DTC structures. This has the benefit of simplicity, while maintaining the features of traditional algorithms such as a rapid dynamic response, uncomplicated control circuit, reduced dependence on motor parameters, etc. In addition, it obtains a smoother flux trajectory that is conducive to improvement of the harmonic elimination capability, the switching frequency utilization as well as the torque and power performance in the field-weakening region. The effectiveness and feasibility of this DTC algorithm are demonstrated by both theoretical analysis and experimental results.

• Journal of Astronomy and Space Sciences
• /
• 제7권2호
• /
• pp.113-123
• /
• 1990

전자 beam이 중성 plasma계에 들어왔을 때의 상호작용을 이차원 정전 model을 사용하여 수치계산을 한 결과 beam의 밀도변화에 따라 상호작용이 큰 변화를 보이는 것으로 나타났다. beam 전자의 밀도가 주변 전자의 밀도보다 낮을 때는 많은 양의 beam들이 주변 plasma와의 상호작용을 통해 위상공간에서 vortex 구조를 보이며 입사지역으로부터 멀리 진행할 수 있었던 반면 beam 전자들의 밀도가 높을 때는 대부분의 beam 전자들이 입사지역으로 되돌아오는 희귀전류를 형성하였다. 이 때 자기장의 게기에 따라 전자보다 훨씬 질랴이 큰 ion들이 가속될 수도 있으며 전자들의 전파와 상호작용의 양상이 크게 바뀔 수 있는 것으로 나타났다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권3호
• /
• pp.7-9
• /
• 2014

Single-crystal like $MgB_2$ thin film was grown on (000l) $Al_2O_3$ substrate by using hybrid physical-chemical vapor deposition (HPCVD) system. Single crystal properties were studied by X-ray diffraction (XRD) and the full width at half maximum (FWHM) of the (0001) $MgB_2$ peak is $15^{\circ}$, which is very close to that has been reported for $MgB_2$ single-crystal. It indicates that the crystalline quality of thin film is good. Temperature dependence on resistivity was investigated by physical property measurement system (PPMS) in various applied fields from 0 to 9 T. The upper critical field ($H_{c2}$) and irreversibility field ($H_{irr}$) were determined from PPMS data, and the estimated values are comparable with that of $MgB_2$ single-crystals. The thin film shows a high critical temperature ($T_c$) of 40.4 K with a sharp superconducting transition width of 0.2 K, and a high residual resistivity ratio (RRR=21), it reflects that $MgB_2$ thin film has a pure phase structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.260-263
• /
• 2002

There is great interest in developing magnetoresistance(MR) sensor, using ferromagnetic, electrically non-magnetic conducting and antiferromagnetic films, especially for the use in weak magnetic fields. Here, we report single and Wheatstone-bridge type of MR sensors made in Si(001)/NiO($300{\AA}$)/NiFe bilayers. Angular dependence of MR profiles was measured in Si(001)/NiO($300{\AA}$)/NiFe($450{\AA})$ films as a function of an angle between current and applied field direction, also, linearity was determined. AMR characteristics of single MR sensors was well explained with single domain model. Good linearity in $45^{\circ}$ Wheatstone-bridge type of MR sensors consisting of 4 single MR sensors made in Si(001)/NiO($300{\AA}$)/NiFe($450{\AA})$ was shown in the range of about ${\leq}{\pm}5$ Oe.

• Journal of Magnetics
• /
• 제3권4호
• /
• pp.105-111
• /
• 1998

The low energy excitations of spin waves (SWR) in thin films can be used for determination of the surface anisotropy constant and the nonhomogeneities of magnetization in the close-to-surface layer. The dispersion relation in SWR is sensitive on the geometry of experiment. We report on temperature dependence of surface magnetic anisotropy energy constant in magnetic semiconductor thin films of$ CdCr_{2-2x}In_{2x}Se_4$ at spin glass state. Samples were deposited by rf sputtering technique on Corning glass substrate in controlled temperature conditions. Coexistence of the infinite ferromagnetic network (IFN) and finite spin slusters (FSC) in spin glass state (SG) is know phenomena. Some behavior typical for long range magnetic ordering is expected in samples at SG state. The spin wave resonance experiment (microwave spectrometer at X-band) with excited surface modes was applied to describe the energy state of surface spins. We determined the surface magnetic anisotropy energy constant versus temperature using the surface inhomogeneities model of magnetic thin films. It was found that two components contribute to the surface magnetic anisotropy energy. One originates from the exchange interaction term due to the lack of translation symmetry for surface spin as well as from the originates from the exchange interaction term due to the lack of translation symmetry for surface spin as well as from the stray field of the surface roughness. The second one comes from the demagnetizing field of close-to surface layer with grad M. Both term linearly decrease when temperature is increased from 5 to 123 K, but dominant contribution is from the first component.

• 전기화학회지
• /
• 제1권1호
• /
• pp.18-23
• /
• 1998

전기장이 충전층내 거대 이온성분자체의 분리를 위한 이론적 인 모델이 수행되었다 충전층내 여과재에서 전기적인 대류속도의 효과는 분자량이 큰 이온성 물질을 분리하기 위해서는 효과적이다. 이유는 전기장하에 거대이온성 분자체는 전기의 방향으로 빠르게 이온성분자체가 곧게 뻗는 현상때문이다. 이러한 분자체의 거동현상은 여과재내에 대류속도가 전기힘과 분자크기에 따라 대류속도가 다르기 나타나기 때문에 이들에 대한 연구는 충전층내에서 분자체를 분리하는데 도움이 된다 본 논문에서 여과재시스템내에서 이론분리는 확산에 대한 대류속도의 비$(Pe_t/Pe_g)$를 이용하여 예측하였으며 본 논문에서 얻어진 결과는 여과시스템을 설계하고 응용하는데 유효하게 적용될 것이며 이론적인 근거는 연산자 이론과 Reptation이론이 적용되였다.