• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.4
• /
• pp.82-95
• /
• 1980

This paper complies the results of the studies so far made on the subsoil improvement of subsurface drainage systems for wet paddy fields (those were located in the Gum-Ho area in Kyung Buk province) which had poor permeability and a high water table. In general, a drainage problem is an excess of water on the ground surface which can effect the productivity and bearing capacity of the soil. With drain pipe systems, (According to their depths and spacing) it may be possible to correct that problem. The experimentation consisted of three test plots, two of which included drain pipe systems with varing depths and width spacing of the pipes. The third plot (C) was an ordinary plot being exempt of a drain pipe system. In detail, the depth of plot A was 80 cm, and the width spacings began at 2. Om and increased by 2. Om up to 10. 0m. The depth of plot B was 60cm and the width spacing was the same as plot A. These tests were performed to research specific details; such as crop yeild, bearing capacity of the soil, the amount of underdrainage, surface cracks, root distribution, the water table level, the consumptive water depth and the soil moisture content. The test period lasted three years, from 1977 thru 1979. The results obtained were as follows: 1. During the test period, the weather conditions for the area tested were in accordance with the annual average for that area. Furthermore the precipitation factor during the spring cultivation season, the intermediate drainage period and the harvest drainage period was of optimum conditions for controling surface cracks, because of less precipitation than evaporation. 2. The difference in the level of the ground water table in plots A and B was hardly noticable, but the difference in the test plots and the ord. plot was greatly noticable. The test plots (A, B) were 30 to 40cm lower than the ordinary plot. On the whole, the ground water table of the ord. plot always stayed at a level of 15-20cm beneath the surface of the soil, the ground water table of the test plot A showed The difference in the depth of the pipe lower than the test plot B, while the test plots showed a remarkable descending effect. 3. The soil temperature in plot A was slightly core than in plot B with a difference of 0. 47$^{\circ}$C, but plot A was 1. 6$^{\circ}$C higher than the ord. plot during the flooding period, but after drainage the temperature difference climed to 2. 0$^{\circ}$C. 4. During the 3rd test year, the values of the cracks were recorded with the values of 59cm in plot A, 42cm in plot B and 15cm in the ordinary plot. Plots A and B had increased 2.5 times the value of the first year while the ordinary plot had remained the same. 5. The root weight of the rice was measured at a value of 77.2 gr. for plot A, 73.5 gr. for plot B and 65.3 gr. for the ord. plot. Therefore, the root growths in plots A and B were much more energetic than in the ord. plot. 6. The consumptive water depth measured during the 3rd year resulted in the values of 26. 0mm per day for plot A, and 24.9 mm per day for plot B, respectively. Therefore, both plot A and plot B maintained the optimum consumptive water depths, but the ordinary plot only obtained the value of 12.3 mm per day, which clearly showed less than the optimum consumptive water depth which is 20 to 30 mm/day. 7. The soil moisture content is in direct relationship to the ground water level. During drainage, test plot A decreased in its ground water level much more rapidly than the other two plots. Therefore, plot A had a much less soil moisture content. But this decreased water level could be directly effected by the weather conditions. 8. The relationship between the bearing capacity and the soil moisture content were directly inversely proportional. It can be assumed that the occurence of soil creaks is limited by the soil moisture content. Therefore, the greater the progress of the surface creaks resulted in a greater bearing capacity. So, tast plot A with a greater amount of surface cracks than the other test plots resulted in a greater bearing capacity. But, the bearing capacity at the harvest season could be effected by the drainage during the intermediate drainage period and by the weather conditions. 9. Comparing the production of the test plots to the ord. plot; there was an increased value of 840kg for plot A, 755kg for plot B and 695kg for the ord. plot in the rough rice. Therefore, plot A had an increase of 20% over the ordinary plot. The possibility of producing double crops was investigated. The effects on barley production in the test plots showed a value of 367kg per 10 acres, which substantiated the possibility of double crops because that value showed an increased value over the average yearly yield for those uplands. 10. So as a result, it can be recommended that by including a drain pipe system with the optimum conditions of an (80cm centimeter) depth and a (l0m) spacing will have a definite positive effect on the over all production capacity and quality of wetpaddy fields.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.555-564
• /
• 2013

Innovative evolution in mobile devices along with recent spread of Tablet PCs and Smart Phones makes a new change not only in individual life but also in enterprise applications. Especially, in the case of medium-large mobile applications for large enterprises which generally takes more than 3 months of development periods, importance and complexity increase significantly. Generally Agile-methodology is used for a development process for the medium-large scale mobile applications, but some issues arise such as high dependency on skilled developers and lack of detail development directives. In this paper, S-MADP (Smart Mobile Application Development Process) is proposed to mitigate these issues. S-MADP is a service oriented development process extending a object-oriented development process, for medium-large scale mobile applications. S-MADP provides detail development directives for each activities during the entire process for defining services as server-based or client-based and providing the way of reuse of services. Also, in order to support various user interfaces, S-MADP provides detail UI development directives. To evaluate the performance of S-MADP, three mobile application development projects were conducted and the results were analyzed. The projects are 'TBS(TB Mobile Service) 3.0' in TB company, mobile app-store in TS company, and mobile groupware in TG group. As a result of the projects, S-MADP accounts for more detailed design information about 'Minimizing the use of resources', 'Service-based designing' and 'User interface optimized for mobile devices' which are needed to be largely considered for mobile application development environment when we compare with existing Agile-methodology. Therefore, it improves the usability, maintainability, efficiency of developed mobile applications. Through field tests, it is observed that S-MADP outperforms about 25% than a Agile-methodology in the aspect of the required man-month for developing a medium-large mobile application.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.33-44
• /
• 2005

On the basis of a stepwise and careful integration of various field and laboratory methods the analysis of groundwater flow characterization was performed with five boreholes (BH-1, -2, -3, -4, -5) on a pilot site of Natural Forest Park in Guemsan-gun, Chungcheongbook-do, Korea. The regional lineaments of NW-SE are primarily developed on the area, which results in the development of many fractures of NW-SE direction around boreholes made in the test site for the study. A series of surface geological survey, core logging, geophysical logging, tomography, tracer tests, and heat-pulse flowmeter logging were carried out to determine fracture characteristics and fracture connectivity between the boreholes. In the result of fracture connectivity analysis BH-1 the injection well has a poor connectivity with BH-2 and BH-3, whereas a good with BH-4 and BH-5. In order to analyse the hydraulic connectivity between BH-1 and BH-5, in particular, a conspicuous groundwater outflux in the depth of 12 m and influx in the depth of 65 m and 70 m, but partly in/outflux occurred in other depths in BH-5 were observed as pumping from BH-1. On the other hand, when pumping from BH-5 the strong outflux in the depths of 17 m and 70 m was occurred. The spatial connectivity between the boreholes was examined in the depth of 15 m, 67 m, and 71 m in BH-1 as well as in the depth of 15 m, 17 m, 22 m, 72 m, and 83 m in BH-5.

• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.193-198
• /
• 2002

Purpose : Oligodendrogliomas (ODG) are a rare, slow growing, tumor in the brain, which can be cured by complete surgical resection, but as yet it is not known if postoperative adjuvant radiation therapy (RT) is essential, We analyzed the treatment results of patients with irradiated ODG to investigate the efficacy of RT in terms of survival rates and other influencing prognostic factors. Methods and Materials : Between March 1983 and December 1997, 42 patients with ODG were treated with RT at our hospital. The RT was peformed dally at a dose of $1.8\~2.0\;Gy$, at 5 fractions per week, to a total dose of between 39.6 Gy and 64.8 Gy (mean 53.3 Gy). The ages of the patients ranged between 5 and 62 years, with a median age of 39 years. The mean follow-up period was 63.4 months (8-152 months). The Kaplan-Meier method was used to assess the survival, and 5 year survival rates (5-YSR). Log rank tests and Cox regression analyses were used to define the significance of prognostic factors. Results : The majority of ODG in this study were located in the cerebral hemisphere $(83.3\%)$. ODG are slightly more common in men than women, and commonly occurs in middle age, between the 3rd and 4th decades. It has been recommended that RT is commenced within 4 weeks following surgery (5-YSR; $86\%\;vs.\;49\%;\;p<0.03$). Histologically well differentiated, as opposed to poorly differentiated, tumors were found to have a more favorable prognosis (p<0.02). The actuarial 5-YSR was $65.3\%$ (median survival 90 months). 5-YSR for the various extents of surgical excision, followed by external RT, was superior to that of biopsy only followed by external RT $(69.9\%\;vs.\;25.6\%,\;p<0.01)$. Tumor size and location, overall elapsed irradiation days, age, sex, whole brain irradiation as a course of treatment and chemotherapy, had no influence on the 5-YSR (p>0.05). Conclusion : A local involved field irradiation with conventional fractionation, commencing within 4 weeks following surgical excision of the tumor, was beneficial for the 5-YSR, but a total radiation dose exceeding 60 Gy did not improve the 5-YSR.

• Parasites, Hosts and Diseases
• /
• v.29 no.3
• /
• pp.293-310
• /
• 1991

Clonorchis sinensis is a common parasite of man in Korea. Researches on the specific antigens of C. sinensis would be valuable not only because those elucidate the molecular characteristics of this fluke but also because it is applicable to immunodiagnosis. Although many monoclonal antibodies have been used in the field of parasite immunology, few articles on monoclonal antibodies against C. sinensis have been published so far. The aim of this study was to analyse C. sinensis antigens recognized by monoclonal antibodies, and to set up ELISA-inhibition test using C. sinensis specific monoclonal antibodies for improved specificity of immunodiagnostic tests. By fusion between spleen cells of the mice immunized with C. sinensis water-soluble crude adult worm antigens and plasmacytoma cells of mouse origin, 29 hybridoma clones secreting anti-C. sinensis monoclonal antibodies were made, and 8 clones among those were found specific. After cell cloning, isotypes of 6 selected specific monoclonal anti- bodies were determined to be IgGl, IgG2b and IgA. Four exposed antigenic determinants of natural infection were recognized by different specific monoclonal antibodies. By enzyme-immunoelectrotransfer blot, 10 KD, 34 KD antigenic determinants were found to be reacted with CsHyb 0714-20, CsHyb 0605-10 monoclonal antibodies, respectively, The antigenic determinant recognized by CsHyb 0714-20 monoclonal antibody was revealed to be located at the surface and parenchyme of a parasite by indirect immunoauorescent antibody technique, and those reacted with CsHyb 0605-10, CsHyb 0714-25 monoclonal antibodies were found at the parenchyme and intestine. The antigenic determinant reacted with CsHyb 0605-23 monoclonal antibody was found mainly around the uterine eggs. Four antigenic determinants recognized by specific monoclonal antibodies were all found to be present in the early eluted fractions of C. sinensis antigens separated by Sephadex G-200 gel filtration. By conventional ELISA, 75% of clonorchiasis cases were found positive, but 7.1% of normal controls and 37.5% of paragonimiasis cases showed false positives. However, by ELISA-inhibition test using C. sinensis specific monoclonal antibody (CsHyb 0605-23), 77.1% of clonorchiasis cases were found positive, and there were no false positives in normal controls or paragonimiasis cases, indicating 100% specificity. The ELISA- inhibition test using monoclonal antibodies was found to have same sensitivity and definitely high specificity in comparison with conventional ELISA for serodiagnosis of human clonorchiasis.

• Pediatric Infection and Vaccine
• /
• v.4 no.2
• /
• pp.257-264
• /
• 1997

Purpose: We performed this study to find out short period humoral immunogenicity and safety of 47 passaged Oka strain live attenuated varicella vaccine(1,400PFU) in 12 months to 15 years aged healthy children. Methods: Ninety nine healthy chidren, who have no histories of varicella vaccination, recent chicken pox illness and contact, allergy to other vaccines and underlying severe diseases, were involved in this study from April 1997 to August 1997. 5ml blood were collected before vaccination and after vaccination from all vaccinees to measure varicella membrane antibody by FAMA, and varicella IgG antibody by EIA. And immediate reactions within 30 minutes after vaccination, local and systemic reactions within 3 days after vaccination and vaccine induced systemic illness during 6 weeks postvaccination period were observed in all vaccinees to identify side effects of study vaccine. Results: 1) 49 seronegative and 50 seropositive vaccinees were identified in both prevaccination serologic tests. 2) Serologic responses after vaccination measured by the FAMA in seronegative group showed that the mean GMT level revealed 64.0, and seroconversion rate was 97.9%. And serologic responses after vaccination measured by the FAMA in seropositive group showed that the mean GMT level(242.2) was markedly elevated comparing with the mean GMT level(9.2) of pre vaccination. 3) The results of EIA in seronegative group revealed that postvaccination mean GMT was 435.2(prevaccination GMT; 78.7), and 100% seroconversion rate. Also, the results of EIA in seropositve group showed that the mean GMT level(769.9) of postvaccination was almostly two fold hihger than the mean GMT level(419.7) of prevaccination. 4) Observed local reactions like injection sites redness, pain, hardness and itching sense were mild and disappeared within 3 days, also shorterm systemic reactions like irritability, lethargy, poor appetites and rash were not remarkable. And there were no remarkable side effects due to vaccine during study period in all vaccinees. Conclusion: We confirmed that 47 paasaged Oka strain live attenuated varicella vaccine has high shorterm humoral immunogenicity and safety. However, we need more detail and longterm humoral and cell mediated immunogenicity studies of this vaccine including clinical field trials.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.227-233
• /
• 2013

'Taehan' (Avena sativa L.), a winter oat for forage use, was developed by the breeding team at the Department of Rice and Winter Cereal Crops, NICS, RDA in 2012. It was derived from a cross between 'Malgwiri' and 'CI8015'. Subsequent generations were handled in bulk and pedigree selection programs at Suwon and Yeoncheon, respectively. After 2 years of preliminary and advanced yield tests, 'SO00020B-YB-15-5-9-4-3', designated as 'Gwiri78', were subsequently evaluated for earliness and forage yield during 3 years in four regions such as Yesan, Iksan-1 (Paddy), Iksan-2 (upland), and Jeju from 2010 to 2012, and finally named 'Taehan'. Over 3 years, the heading date of 'Taehan' was about 6 days earlier than that of the check cultivar 'Samhan' (May 8 and May 14, respectively), and their average forage dry matter yield harvested at the milk-ripe stage was 14.5 tone $ha^{-1}$, compared with 14.1 tone $ha^{-1}$ for the check cultivar. The cultivar 'Taehan' was lower than that of the check cultivar 'Samhan' in terms of protein content (6.3% and 7.7%, respectively) and total digestible nutrients (60.7%, and 62.1%, respectively). The TDN yield was more than that of the check cultivar (9.1 tone $ha^{-1}$ and 8.0 tone $ha^{-1}$, respectively). Fall cropping of 'Taehan' is recommended only in areas where average daily minimum mean temperatures in January are > $-6^{\circ}C$, and it should not be cultivated in mountainous areas, where frost damage is likely to occur.

• Journal of Gifted/Talented Education
• /
• v.13 no.4
• /
• pp.65-94
• /
• 2003

The purpose of this study is to acquire the information on the current situation of students' selection process in order to renovate the system of picking up the students. As a first step of the study, we examined the validity of the factors of the single-out system such as qualification and the process for the application and the standards and proceeding of the selection. Then we analysed the result of the entrance examination of Hansung Science Highschool in 2002. The analysis was on the correlation between the result of entrance examination and the achievement in the school and the decision of the course after graduation. To know on the achievement of the students, we investigated the records of regular tests and asked the teachers' opinion in math and science classes. As a result, we gained the following points: First, the present single-out system has a danger of excluding students who are much talented in science and math field because it is based on students' achievements in middle schools; Second, the new selection system should consider the character and attitude of the applicants in addition to their knowledge; Third, the continuous observation of the teacher in middle school should be an important factor of the picking up system; Fourth, more questions requiring divergent thinking ability and inquiry skill should be developed as selective examination question. Also examination questions should cover the various contents from mathematics to science, and do not affect pre-learning; Finally, the system of present letting all students stand in one line should be changed into that of letting students in various lines. We can consider using multi-step selection system.

• Journal of Korean Philosophical Society
• /
• v.146
• /
• pp.307-328
• /
• 2018

The use of thought experiments has a long history in many disciplines including science. In the field of philosophy, thought experiments have frequently appeared in the pre-existing literature on the contemporary Analytic Philosophy. A thought experiment refers to a synthetic environment where the designer of the experiment-with his or her intuition and imagination-tests common-sense knowledge. It can be understood as a conceptual tool for testing the validity of the common understanding of an issue or a phenomenon. However, we are not certain about the usefulness or efficacy of a thought experiment in knowledge production. The design of a thought experiment is meant to lure readers into believing as intended by the experiment itself. Thus, regardless of the purpose of a thought experiment, many readers who encounter the experiment could feel deceived. In this paper, to analyze the logic of thought experiments and to seek the source of uneasiness the readers and critics may feel about thought experiments, I draw lessons from three renowned thought-experiments: Thomson's 'ailing violinist', Putnam's 'brain in a vat', and Searle's 'Chinese room'. Imaginative thought experiments are usually constructed around a gap between the reality and the knowledge/information at hand. From the three experiments, several lessons can be learned. First, the evidence of the existence of a gap provided via thought experiments can serve as arguments for counterfactual situations. At the same time, the credibility and efficacy of the thought experiments can be damaged as soon as the thought-experiments are carried out with inappropriate and/or murky directions regarding the procedures of the experiment or the background of the study. According to D. R. Hofstadter and D. C. Dennett(1981), the 'knob setting' in a thought experiment can be altered in the middle of a simulation of the experimental condition, and then the implications of the thought experiment change altogether, indicating that an entirely different conclusion can be deduced from thought experiment. Lastly, some pre-suppositions and bias of the experiment designers play a considerable role in the validity and the chances of success of a thought experiment; thus, it is recommended that the experiment-designers refrain from exercising too much of their imagination in order to avoid contaminating the design of the experiment and/or wrongly accepting preconceived/misguided conclusions.