• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.3
• /
• pp.178-184
• /
• 2019

The objective of this study was to evaluate the dry matter yield of (DMY) of Italian ryegrass (IRG) forage crop based on two seeding date (September 25 and October 2) in 2017 and 2018, and evaluation of the potential reason of DMY reduction in IRG cultivars grown at Chuncheon, South Korea. Three cultivars of IRG including Kowinearly, Kowinmaster and Hwasan 104 were used in this experiment. The experimental field was designed as a split-split-plot arrangement. The cultivars were harvested on April 26 before the heading stage of both years. In this study, no significant effect (p>0.05) of seeding date has been found on the DMY, whereas the cultivars and year showed a significant effect on the DMY (p<0.05). Except September 25 of 2017, Hwasan 104 indicated significantly lower (p<0.05) DMY than Kowinearly and Kowinmaster in all seeding periods. Though no significant difference (p>0.05) was observed for the DMY between the two seeding dates in 2018, but the DMY was significantly lower (p<0.05) than that of 2017. Lower crude protein (CP) content of Kowinearly was observed on the seeding date of October 2 of 2017, and also in both seeding dates on 2018 (p<0.05). No significant difference (p>0.05) was observed in acid detergent fiber (ADF) between the cultivars on both seeding dates and years. Similarly, no significant difference (p>0.05) was found in neutral detergent fiber (NDF) between the cultivars in 2017. However, Kowinearly showed higher NDF content as compared to Kowinmaster and Hwasan 104 on both seeding dates and years. The seeding date has no significant difference (p>0.05). Thus, considering the extent of DMY in both years, the mean minimum temperature during winter season could be the limiting factor for the DMY of IRG cultivars. However, based on this study, the seeding dates of September 25 and October 2 have no potential effect on the DMY. Thus, on the basis of the current DMY and forge quality parameters, the cultivation Kowinmaster is recommended in Chuncheon.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.3-10
• /
• 2008

The choice of basis for representation of element in $GF(2^m)$ affects the efficiency of a multiplier. Among them, a multiplier using redundant representation efficiently supports trade-off between the area complexity and the time complexity since it can quickly carry out modular reduction. So time of a previous multiplier using redundant representation is faster than time of multiplier using others basis. But, the weakness of one has a upper space complexity compared to multiplier using others basis. In this paper, we propose a new efficient multiplier with consideration that polynomial exponentiation operations are frequently used in cryptographic hardwares. The proposed multiplier is suitable fer left-to-right exponentiation environment and provides efficiency between time and area complexity. And so, it has both time delay of $T_A+({\lceil}{\log}_2m{\rceil})T_x$ and area complexity of (2m-1)(m+s). As a result, the proposed multiplier reduces $2(ms+s^2)$ compared to the previous multiplier using equally-spaced polynomials in area complexity. In addition, it reduces $T_A+({\lceil}{\log}_2m+s{\rceil})T_x$ to $T_A+({\lceil}{\log}_2m{\rceil})T_x$ in the time complexity.($T_A$:Time delay of one AND gate, $T_x$:Time delay of one XOR gate, m:Degree of equally spaced irreducible polynomial, s:spacing factor)

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.661-669
• /
• 2022

The need for miniaturization, high efficiency, and green energy resources as an energy storage device through the development of various electronic device has emerged. Accordingly, nanomaterials with excellent electrochemical properties, such as graphene and graphene hybrids, are attracting attention as promising materials. In particular, in the electric vehicle industry, cost reduction of secondary batteries is a key factor that can determine the spread of related industries, and it is most important to analyze R&D trends for battery material technology and respond to future technological development directions. Therefore, in this study, we tried to suggest a direction for R&D activities in the future by analyzing patent trends for graphene anode material technology for secondary batteries and deriving implications. As a result, in the case of anode material technology, the proportion of foreigners in the US and European patent markets was higher than in the Korean and Japanese patent markets, which means that the US and European marketability is high. In addition, Japanese applicants are filing high-level applications not only in the Japanese patent market but also in other countries suggests that Japan is leading the technology in this field. Lastly, the proportion of research institutes in the patent market of Korea and the US remains high compared to that of Japan and Europe, indicating that the commercialization of technology is still slow in those countries. Therefore research institutes and companies in Korea will have to establish their own strategies for developing and securing materials using the results of patent trends in major countries and major companies analyzed in this study.

• Tunnel and Underground Space
• /
• v.33 no.5
• /
• pp.388-398
• /
• 2023

The changes in groundwater flow due to mining development act as a contributing factor to major issues such as ground subsidence, strength reduction and collapse. For the sustainable mining development, measures for dealing with fluctuations in seasonal underground water inflow, power losses, pump damage, and unexpected increases in inflow must be put in place. In this study, the aim is to identify the causes of underground seepage through the examination of hydrological connectivity between the study area and nearby limestone mine. A tracer tes for assessing subsurface connectivity has been planned. A variety of tracers, such as dyes and ions, were applied in lab test to select the optimal tracer material, and a hydrological model of the study area was implemented through field test. Finally, the hydrological connectivity between the external stream and underground water in the mine was analyzed.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Korean Journal of Weed Science
• /
• v.12 no.1
• /
• pp.16-30
• /
• 1992

A field experiment was done to evaluate the growth response, rhizobia nodulation and vesicular-arbuscular mycorrhizal fungi (VAMF) infection of soybean treated with the different concentration of three-herbicides, alachlor, simazine, linuron. The results obtained were summarized as follows ; Emergence rate of soybean was non-significantly decreased by increasing the herbicide concentration. In simazine treatment, low emergence rate showed even in recommended concentration, especially the lowest emergence rate in treble concentration of recommended dose was about 50%. The plant length of soybean lowered by increasing the herbicide concentration, but there were almost no differences in recommended dose. Particularly that in a high concentration of herbicides at three weeks after treatment(WAT) was decreased remarkably. In the plant diameter of soybean shoot, no differences in the recommended concentration of alachlor and linuron at 2 WAT, but those of recommended dose was decreased with the lapse of time, and the lowest treatment was simazine-treated plot. Leaf area and fresh weight of soybean tended to decrease over the control even in recommended concentration and it was decreased with the increment of the herbicide dose. Yield component, fresh weight of rhizobia nodule and chlorophyll content of soybean leaves were reduced with the increment of herbicide dose, espicially remarkable tendency was revealed in simazine-treated plot. Seasonal infection rate of VAM showed a slight decrease by increasing of herbicide dose, and the lowest infection was simazine treatment. Significant correlation was realized among the reduction of rhizobia nodulation, VAM colonization and the agronomic characters of soybean and it was considered that the reduction of rhizobia nodulation and VAM colonization by misapplication of the herbicides might be a causal factor for decrease in soybean yield.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.3
• /
• pp.216-224
• /
• 1998

The objective of this study was to investigate the effect of sesame monoculture and sesame in rotation (SR) with maize. soybean. barley or rye on reduction of injury by continous cropping in sesame. Field studies were conducted for 3-years (1995~1997) at the experimental field of the Crop Experiment Station. Compared to CS (continuous sesame). SR treatments turned out to keep more organic matter and higher exchangeable cation concentrations in soils. BS (barley and sesame in a 1-year rotation) and RS (rye and sesame in a 1-yea r rotation) treatments had significantly greater available $P_2O_5$ contents in soils than CS, MS (maize and sesame in a 3-year rotation) and SbS (soybean a nd sesame in a 3-year rotation). The pH of the soils under different treatments were not significantly different. SR treatments exhibited significantly lower bulk density and higher pore space than CS. Soil microbial biomass C (SMBC) and N (SMBN) were determined by the chloroform fumigation-extraction method. SMBC and SMBN were significantly higher in soils under BS and RS than those under CS, but only during the 1 year of monitoring. MS and SbS treatments resulted in higher SMBC and SMBN than CS. The occurrence of injury by disease of sesame is the important primary factor of injury by continous cropping, but the disease occurrence with rotation did not decrease in th is experiment. Under CS treatment, the growth and grain of sesame was significantly lower than those under other treatments. Compared to CS, the increments of grain yield of sesame were 68, 63, 57 and 51% for MS, RS, SbS and BS, respectively in the first harvest. In the second harvest, they were 24% for MS, 28% for RS, 20% for SbS and 19% for BS. The average increase ratios during the two years were 41, 41, 34, and 33% for MS, RS, SbS and BS, respectively.

• Journal of Biomedical Engineering Research
• /
• v.23 no.1
• /
• pp.49-60
• /
• 2002

Receive dynamic focusing with an array transducer can provide near optimum resolution only in the vicinity of transmit focal depth. A customary method to increase the depth of field is to combine several beams with different focal depths, with an accompanying decrease in the frame rate. In this Paper. we Present a simultaneous multiple transmit focusing method in which chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in a sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels. and the crossorelation function of any Pair of the signals has values smaller than the sidelobe levels of each autocorrelation function. This means that each chirp signal can be separated from the combined received signals and compressed into a short pulse. which is then individually focused on a separate receive beamformer. Next. the individually focused beams are combined to form a frame of image. Theoretically, any two chirp signals defined over two nonoverlapped frequency bands are mutually orthogonal In the present work. however, a tractional overlap of adjacent frequency bands is permitted to design more chirp signals within a given transducer bandwidth. The elevation of the rosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals We also observe that the Proposed method provides better images when the low frequency chirp is focused at a near Point and the high frequency chirp at a far point along the depth. better lateral resolution is obtained at the far field with reasonable SNR due to the SNR gain in Pulse compression Imaging .

• Journal of East-West Nursing Research
• /
• v.1 no.1
• /
• pp.22-39
• /
• 1997

Purpose: The purpose of this study is to evaluate the effect of rehabilitation education on the reduction of the stress of family members who have patients suffering from stroke and to find a new way to nurse the patients and their family. Subjects & Methods: The subjects were sixty-one family members with the patients who had been hospotalized in K hospital of oriental medicine from september the 9th, 1996 to september the fourteen, 1996. This study was performed by simulated control group pretest-posttest design; pretest was done on the control group through a questionnaire, counselling and observation while posttest was done on the experimental group 1-2 days after systemic rehabilitation education. To teach the patients and their family, the amended version of a book written by Lee Hae-jin was used as a tool for systemic rehabilitation education. As a method to estimate ADL score, modified Kang's method was applied and ADL score was measured by well-trained technician. As for the tool to estimate the degree of family stress, Choi's method adjusted to this study was applied. In the analysis of the data, social property of the patient and the characteristic of the disease were surveyed in $X^2$ examination to confirm the consistency between the experimental group and the control group. The diffrence in the degree of the stress, which is a dependent factor, was examined by t-test. The difference in ADL score between the experimental group and the control group was examined by t-test. The difference in the degree of the stress according to the general feature of the family with stroke patient, social property of the patients and the characteristic of the disease were surveyed by F examination. The difference in family stress according to the degree of ADL was surveyed by F examination. RESULTS: 1. After hypothetically-examined systemic rehabilitation education, the total of the score of family stress surveyed in 34 items of three domains was compared between the experimental group and the control group. There was no statistically significant difference between two groups; mean score of experimental group=2.28, that of control group=2.93(t=.17, df=59, p=. 66). 2. In the survey on family stress in 34 items, the items over mean score 3.0 were firstly the anxiety of possible disability and relapse of the disease and secondly to watch the patient's suffering without doing anything in the domain of the change of the disease and the difficulty in caring. And the items of the lowest stress with less than mean 2.0 score were little chance to meet the relative and friends, inconsistent treatment and attitude of the medical workers and the change of the attitude of the relative due to the patient orderly in the domain of social and personal relation and the responsibility as the family. The items which showed the difference between two groups were aggravation of neighboring patient(t=3.36, df= 59, p=.001) and the possibility of patient's death(t=2.19, df=58.38, p=.033) in the domain of the change of the disease and the difficulty in caring. 3. In the study on the stress difference according to general features of the family with the stroke patient, the score of family stress with the occupation was higher with mean 2.49 than that of the family stress without occupation with mean 2.16, but there was no significant difference. (F=5.21, df=1/59, p=.026). 4. In the study on the stress difference according to social property of the patient and the characteristic of the disease, there was significant difference in the age of the patients (F=2.98, df=3/57, p=.039). These results show that even if there is no statistically significant difference between two groups, sixteen of the experimental group are less than 3.0 in ADL score(standard 6 score)while eight of the control group are less than 3.0 and that ten of the experimental group are in the year range of 39-49 while four of the control group are in the year range of 39-49 which showed significant difference in family stress. These imply that there is a possibility that the experimental group have serious and fundamental stress resulting in high pretest stress compared with the control group. It might be due to the characteristic of simulated control group pretest-posttest design that the psychologic-supportive effect by the education was not observed. On the basis of these results, the followings are suggested. 1) A study on the nursing-mediated method to reduce the stress in the items which are not resolved by rehabilitation education, a study on nursing according to the patient's age and a study on the supportive nursing toward the family with occupation are required. 2) More than two times consecutive nursing-mediated rehabilitation education to measure the family stress is required. 3) Comprehensive and multilateral systemic education program including the instruction on western-eastern medicine, physical therapy, exercise and diet through collaboration of the experts in each field is required. 4) Family stress at home as well as in the hospital needs to be estimated and home rehabilitation and home-nursing needs to be continued.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.292-292
• /
• 2016

Transition metal dichalcogenides (TMDs) with a two-dimensional layered structure have been considered highly promising materials for next-generation flexible, wearable, stretchable and transparent devices due to their unique physical, electrical and optical properties. Recent studies on TMD devices have focused on developing a suitable doping technique because precise control of the threshold voltage ($V_{TH}$) and the number of tightly-bound trions are required to achieve high performance electronic and optoelectronic devices, respectively. In particular, it is critical to develop an ultra-low level doping technique for the proper design and optimization of TMD-based devices because high level doping (about $10^{12}cm^{-2}$) causes TMD to act as a near-metallic layer. However, it is difficult to apply an ion implantation technique to TMD materials due to crystal damage that occurs during the implantation process. Although safe doping techniques have recently been developed, most of the previous TMD doping techniques presented very high doping levels of ${\sim}10^{12}cm^{-2}$. Recently, low-level n- and p-doping of TMD materials was achieved using cesium carbonate ($Cs_2CO_3$), octadecyltrichlorosilane (OTS), and M-DNA, but further studies are needed to reduce the doping level down to an intrinsic level. Here, we propose a novel DNA-based doping method on $MoS_2$ and $WSe_2$ films, which enables ultra-low n- and p-doping control and allows for proper adjustments in device performance. This is achieved by selecting and/or combining different types of divalent metal and trivalent lanthanide (Ln) ions on DNA nanostructures. The available n-doping range (${\Delta}n$) on the $MoS_2$ by Ln-DNA (DNA functionalized by trivalent Ln ions) is between $6{\times}10^9cm^{-2}$ and $2.6{\times}10^{10}cm^{-2}$, which is even lower than that provided by pristine DNA (${\sim}6.4{\times}10^{10}cm^{-2}$). The p-doping change (${\Delta}p$) on $WSe_2$ by Ln-DNA is adjusted between $-1.0{\times}10^{10}cm^{-2}$ and $-2.4{\times}10^{10}cm^{-2}$. In the case of Co-DNA (DNA functionalized by both divalent metal and trivalent Ln ions) doping where $Eu^{3+}$ or $Gd^{3+}$ ions were incorporated, a light p-doping phenomenon is observed on $MoS_2$ and $WSe_2$ (respectively, negative ${\Delta}n$ below $-9{\times}10^9cm^{-2}$ and positive ${\Delta}p$ above $1.4{\times}10^{10}cm^{-2}$) because the added $Cu^{2+}$ ions probably reduce the strength of negative charges in Ln-DNA. However, a light n-doping phenomenon (positive ${\Delta}n$ above $10^{10}cm^{-2}$ and negative ${\Delta}p$ below $-1.1{\times}10^{10}cm^{-2}$) occurs in the TMD devices doped by Co-DNA with $Tb^{3+}$ or $Er^{3+}$ ions. A significant (factor of ~5) increase in field-effect mobility is also observed on the $MoS_2$ and $WSe_2$ devices, which are, respectively, doped by $Tb^{3+}$-based Co-DNA (n-doping) and $Gd^{3+}$-based Co-DNA (p-doping), due to the reduction of effective electron and hole barrier heights after the doping. In terms of optoelectronic device performance (photoresponsivity and detectivity), the $Tb^{3+}$ or $Er^{3+}$-Co-DNA (n-doping) and the $Eu^{3+}$ or $Gd^{3+}$-Co-DNA (p-doping) improve the $MoS_2$ and $WSe_2$ photodetectors, respectively.