• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.254-254
• /
• 2010

Cu-Pc(copper(II)-phthalocyanine)는 박막의 형성과정에서 열처리 방식과 온도에 따라 박막의 구조가 변하며, 구조로는 열적으로 준 안정적인 $\alpha$-phase와 열적으로 안정적인 $\beta$-phase가 있다. 본 연구에서는 Cu-Pc 박막의 열적으로 안정적인 $\beta$-phase 구조에 대해 온도 조건 변화에 따른 표면 결정 성장의 특성을 연구하고자 한다. 진공증착 방법 중 하나인 thermal evaporation deposition을 이용하여 glass 기판위에 전열 처리 및 후열 처리에 대해 온도 조건 변화에 따른 $\beta$-phase type의 표면 결정 특성을 연구하였다. Cu-Pc 박막의 성장두께는 50nm 일정한 두께로 fluxmeter 및 thickness monitor를 이용하여 제어하였다. 50nm의 두께에 따른 기판온도를 $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$로 전열 처리한 후 각각 전열 처리한 기판온도에 대해 1hour, 2hour, 3hour 후열 처리하여 온도 조건에 따른 박막을 성장한 후, $\beta$-phase type에 대한 결정 구조 및 표면 특성 변화를 분석하였다. 제작된 Cu-Pc의 박막은 $\beta$-phase type으로, 열처리에 따른 $\beta$-phase transition 현상을 연구하였다. XRD(X-ray diffraction)를 통하여 박막에 대한 결정 구조 분석 및 FE-SEM(field emission scanning electron microscopy)을 이용하여 Cu-Pc 박막의 구조적 결정성과 방향성 등, 표면 상태와 형상구조에 대해 표면의 특성을 분석하며, 광 흡수도(UV-visible absorption spectra)을 이용하여 온도 조건에 따른 투과/흡수 현상을 비교분석하였다.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1420-1430
• /
• 2018

We investigate an entangled system, which is analogous to a composite system of a black hole and Hawking radiation. If Hawking radiation is well approximated by an outgoing particle generated from pair creation around the black hole, such a pair creation increases the total number of states. There should be a unitary mechanism to reduce the number of states inside the horizon for black hole evaporation. Because the infalling antiparticle has negative energy, as long as the infalling antiparticle finds its partner such that the two particles form a separable state, one can trace out such a zero energy system by maintaining unitarity. In this paper, based on some toy model calculations, we show that such a unitary tracing-out process is only possible before the Page time while it is impossible after the Page time. Hence, after the Page time, if we assume that the process is unitary and the Hawking pair forms a separable state, the internal number of states will monotonically increase, which is supported by the Almheiri-Marolf-Polchinski-Sully (AMPS) argument. In addition, the Hawking particles cannot generate randomness of the entire system; hence, the entanglement entropy cannot reach its maximum. Based on these results, we modify the correct form of the Page curve for the remnant picture. The most important conclusion is this: if we assume unitarity, semi-classical quantum field theory, and general relativity, then the black hole should violate the Bekenstein-Hawking entropy bound around the Page time at the latest; hence, the infinite production arguments for remnants might be applied for semi-classical black holes, which seems very problematic.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.69-77
• /
• 2020

A quasi one-dimensional multi-phase reaction flow analysis code is developed for the performance analysis of liquid pintle thrusters. Unsteady flow field, droplet evaporation, finite reaction and film cooling models are composed as the major models of the performance analysis. The droplet vaporization takes account of Abramzon's vaporization model, and the combustion employs a flamelet model based on detail chemical reactions. Shine's model is applied for the film cooling calculation. To verify each model, the Sod shock tube, single droplet vaporization, kerosene droplets combustion, and film length are evaluated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.3
• /
• pp.254-261
• /
• 1988

Lysimeter and field experiments were conducted in Sandy Loam to establish a simple estimation model for evapotranspiration (ET) of soybean for three years (l984-1986). Potential ET (PET) could be estimated by the eq.1 using Pan-evaporation (Eo) and was ranged from 1.1 to 4.6 mm/day during the experiments. PET (mm/day)=1.348＋0.573 Eo …(1) Crop coefficient (Kc=maximum ET/PET) could be estimated by the eq.2 using Growth degree (G=days after planting/total growing days) and was ranged from 0.2 to 1.1 and from 0.6 to 1.4 for monoculture cropping and double cropping followed by barley, respectively, during the experiments. Monoculture : Kc=0.016＋3.719 G-3.224 G$^2$…(2), Double cropping : Kc=0.609＋2.014 G-2.120 G$^2$…(2). However, the maximum Kc was shown when G was about 50% and 40% for the monoculture and the double cropping, respectively. Soil water coefficient (f=AET/maximum ET) could be estimated by the eq.3 using soil water tension (Ψ) in 15cm depth. and it was decleased to 0.2 when Ψ was 10 bar. f=0.755-0.537 log │Ψ│…(3) Consequentially, the model to estimate the Actual ET (AET) of soybean was determined as eq.4 with the correction coefficient of -0.380. AET(mm/day)=PETㆍKcㆍf -0.380 …(4) The estimated AET were compared with the measured AET to verify the model established above. The average deviation of the estimated ET(AET) was 0.5782$\pm$0.338 (mm/day), and it would be within reasonable confidence range.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.4
• /
• pp.19-23
• /
• 2007

The superconducting properties of several HTS coated conductors (CC), which had different tape structures, fabricated by KERI, X and Y institutes were compared. We have fabricated the $high-J_c$ SmBCO CC, which has 273.5 A/cm, $1.2MA/cm^2$ and 93.5 K for $I_C,\;J_C\;and\;T_{c-zero}$, respectively, using the EDDC (Evaporation using Drum in Dual Chambers) process. Both X and Y institutes CCs, however, were purchased. The n-values of KERI, X and Y institutes CCs are 58.5, 40.7 and 31.5 in $V=1{\sim}10{\mu}V$ criterion, respectively. The in-field properties of $I_C$ at 77K were investigated and the $J_C(B)/J_C(0G)$ at 0.5 T with $B{\perp}$ ab-plane are 0.31, 0.19 and 0.24 for KERI, X and Y institutes CCs, respectively. From the $I_C-{\theta}-B$ measurement, we observed that the ab-plane of ReBCO phase was tilted for the ab-plane of substrate in the KERI and X institutes CCs. The tilted angle is about 5 degree. We confirmed that the peak shift (as an inclined texture) was observed by X-ray (102) pole figures of the SmBCO for the KERI CC.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.20-26
• /
• 1985

Under the field condition mulched by polyethylene film, changes of the soil moisture content and soil temperature due to the meteorological influence, which have had a great effect upon productivity of upland - field crop, was investigated. The results obtained were as follows; 1. During the early growth stage from the first part of April to the last part of May, soil temperature at 15cm below the mulched surface of ridge (13:00) was about $5^{\circ}C$ higher than that of non-mulched plot. 20 days earlier than normal soil temperature reached up to $20^{\circ}C$ due to the mulching. The increasing of soil temperature resulted from poly ethylene film mulching had a similar tendency for the annual experiment of 3 years (1982-1984). 2. Changes of the soil moisture content in the plow layer during the growing season was remarkably less in the mulched plot than in the non-mulched plot due to suppression of evaporation by polyethylene film. 3. Soil moisture contents of the plots planted with tobacco was lower than those of the non-planted plots owing to the more transpiration induced by growing of the tobacco plant. As the results, it was refered that initial fresh weight of above ground part of tobacco that had an influence upon the consumption of soil moisture by the transpiration rather than evaporation was about 250g per plant. 4. At the appreciable amount of rainfall (for instance; 63.5mm), soil moisture content at middle place between plants in the plow layer of the mulched plot was not increased owing to the infiltration interruption by polyethylene film. 5. By the comparatively small amount of rainfall (e.g. 20mm) after the drought period, leaf water potential of the mulched plot was not increased as much as that of the non-mulched plot owing to the less moisture content of soil resulted from interruption of rainfall.

• Journal of Animal Environmental Science
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2004

A field-scale(8.6${\times}$2.5${\times}$2.4 m) and pilot-scale(1.39${\times}$0.89${\times}$0.89 m) thermophilic aerobic oxidation (TAO) units were installed to investigate the volume reduction efficiency of slurry, by varying the aeration and treatment temperature of swine manure, and the collected liquid was evaluated as a liquid fertilizer. In the field-scale unit, the aeration level and numbers of foam breakers made different effects on the slurry volume and temperature in the TAO system. The experiments were peformed for three cases, using different levels of aeration and numbers of foam breakers: Treat-A (aeration rate; 120 ㎥ air/hr using 2 air pumps and 2 foam breakers), Treat-B (aeration rate; 180 ㎥ air/hr using 3 air pumps and 3 foam breakers) and Treat-C (aeration rate; 180 ㎥ air/hr using 3 air pumps and 4 foam breakers). With the same input volume (5 ㎥/day) of swine manure slurry, the resulting liquid levels, temperatures and evaporation rates were 50∼100 cm, 31∼$64^{\circ}C$ and 55 $\ell/m^2$/day for Treat-A; 40∼90 cm, 29∼$52^{\circ}C$ and 75 $\ell/m^2$/day for Treat-B; and 40∼70 cm, 45∼$54^{\circ}C$ and 120.0 $\ell/m^2$/day for Treat-C. In the pilot-scale unit, semi-continuous flow of swine manure slurry was introduced. 50 $\ell$ every 2hr(T-1), 50 $\ell$ every 3hr(T-2), 40 $\ell$ every 2hr (T-3) and 60 $\ell$ every 4hr (T-4) within 24 hours, in order to find the maximum slurry volume reduction conditions.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.185-194
• /
• 2009

The autogenous shrinkage of high-performance concrete, including very-early strength latex-modified concrete(VES-LMC), is generally bigger than that of normal strength concrete because of the low water/cement ratio, high binder contents, and usage of superplasticizer. Mix. proportion of VES-LMC has low water/cement ratio(0.38), high cement content(390kg/m$^3$), and aid of latex(15% of cement weight). Thus, these factors of VES-LMC, rapid water self-dissipation and evaporation within 3 hours of concrete placement would increase the autogenous shrinkage. The purpose of this study was to evaluate the early-age shrinkage, thermal deformation and autogenous shrinkages of VES-LMC with retarder contents(retarder solids-cement ratio, by weight) using to secure working time in field. The experimental results showed that retarder contents do not affect of the maximum hydration temperature. Early-age expansion of VES-LMC was mostly caused by thermal expansion and partly by autogenous expansion. The autogenous shrinkage is decreased by increasing the retarder contents within this study. On the other hand, the usage of retarder should be decided carefully considering the field conditions because an excessive usage of retarder can cause handful early-age expansion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.296-296
• /
• 2014

We investigate experimentally and theoretically the splitting of surface plasmon (SP) resonance peaks under TE- and TM-polarized illumination. The SP structure at infrared wavelength is fabricated with a 2-dimensional square periodic array of circular holes penetrating through Au (gold) film. In brief, the processing steps to fabricate the SP structure are as follows. (i) A standard optical lithography was performed to produce to a periodic array of photoresist (PR) circular cylinders. (ii) After the PR pattern, e-beam evaporation was used to deposit a 50-nm thick layer of Au. (iii) A lift-off processing with acetone to remove the PR layer, leading to final structure (pitch, $p=2.2{\mu}m$; aperture size, $d=1.1{\mu}m$) as shown in Fig. 1(a). The transmission is measured using a Nicolet Fourier-transform infrared spectroscopy (FTIR) at the incident angle from $0^{\circ}$ to $36^{\circ}$ with a step of $4^{\circ}$ both in TE and TM polarization. Measured first and second order SP resonances at interface between Au and GaAs exhibit the splitting into two branches under TM-polarized light as shown in Fig. 1(b). However, as the incidence angle under TE polarization is increased, the $1^{st}$ order SP resonance peak blue-shifts slightly while the splitting of $2^{nd}$ order SP resonance peak tends to be larger (not shown here). For the purpose of understanding our experimental results qualitatively, SP resonance peak wavelengths can be calculated from momentum matching condition (black circle depicted in Fig. 2(b)), $k_{sp}=k_{\parallel}{\pm}iG_x{\pm}jG_y$, where $k_{sp}$ is the SP wavevector, $k_{\parallel}$ is the in-plane component of incident light wavevector, i and j are SP coupling order, and G is the grating momentum wavevector. Moreover, for better understanding we performed 3D full field electromagnetic simulations of SP structure using a finite integration technique (CST Microwave Studio). Fig. 1(b) shows an excellent agreement between the experimental, calculated and CST-simulated splitting of SP resonance peaks with various incidence angles under TM-polarized illumination (TE results are not shown here). The simulated z-component electric field (Ez) distribution at incident angle, $4^{\circ}$ and $16^{\circ}$ under TM polarization and at the corresponding SP resonance wavelength is shown in Fig. 1(c). The analysis and comparison of theoretical results with experiment indicates a good agreement of the splitting behavior of the surface plasmon resonance modes at oblique incidence both in TE and TM polarization.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.285-295
• /
• 1999

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of their capability of multi-color emission, and low operation voltage. An approach to realize such device characteristics is to use active layers of lanthanide complexes with their inherent extremely sharp emission bands in stead of commonly known organic dyes. In general, organic molecular compounds show emission due to their $\pi$-$\pi*$ transitions resulting in luminescence bandwidths of about 80 to 100nm. Spin statistic estimations lead to an internal quantum efficiency of dye-based EL devices limited to 25%. On the contrary, the fluorescence of lanthanide complexes is based on an intramolecular energy transfer from the triplet of the organic ligand to the 4f energy states of the ion. Therefore, theoretical internal quantum efficiency is principally not limited. In this study, Powders of TPD, $Eu(TTA)_3(phen) and AlQ_3$ in a boat were subsequently heated to their sublimation temperatures to obtain the growth rates of 0.2~0.3nm/s. Organic electrolumnescent devices(OELD) with a structure of $glass substrate/ITO/Eu(TTA)_3(phen)/AI, glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AI and glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AIQ_3AI$ structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, $Eu(TTA)_3(phen)$ as an emitting material, and Tris(8-hydroxyquinoline)Aluminum$(AlQ_3)$ as an electron transporting layer. Electroluminescent(EL) and current density-voltage(J-V) characteristics of these OELDs with various thickness of $Eu(TTA)_3(phen)$ layer were investigated. The triple-layer structure devices show the red EL spectrum at the wavelength of 613nm, which is almost the same as the photoluminescent(PL) spectrum of $Eu(TTA)_3(phen)$.It was found from the J-V characteristics of these devices that the current density is not dependent on the applied field, but on the electric field.