• Radiation Oncology Journal
• /
• v.26 no.4
• /
• pp.289-294
• /
• 2008

Purpose: To improve the quality of the statistical analysis of papers published in the Journal of the Korean Society for Therapeutic Radiology and Oncology (JKOSTRO) by evaluating commonly encountered errors. Materials and Methods: Papers published in the JKOSTRO from January 2006 to December 2007 were reviewed for methodological and statistical validity using a modified version of Ahn's checklist. A statistician reviewed individual papers and evaluated the list items in the checklist for each paper. To avoid the potential assessment error by the statistician who lacks expertise in the field of radiation oncology; the editorial board of the JKOSTRO reviewed each checklist for individual articles. A frequency analysis of the list items was performed using SAS (version 9.0, SAS Institute, NC, USA) software. Results: A total of 73 papers including 5 case reports and 68 original articles were reviewed. Inferential statistics was used in 46 papers. The most commonly adopted statistical methodology was a survival analysis (58.7%). Only 19% of papers were free of statistical errors. Errors of omission were encountered in 34 (50.0%) papers. Errors of commission were encountered in 35 (51.5%) papers. Twenty-one papers (30.9%) had both errors of omission and commission. Conclusion: A variety of statistical errors were encountered in papers published in the JKOSTRO. The current study suggests that a more thorough review of the statistical analysis is needed for manuscripts submitted in the JKOSTRO.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.10
• /
• pp.1016-1023
• /
• 2006

The water content of dewatered cake produced from belt press dewatering equipment was about 75 wt% which was some high to handle it, so the equipment contained a limit at the economical and environmental aspect. The thermal dewatering equipment built as an alternative to overcome several problems was set up at the sludge treatment field and estimated some feasibility as comparison with the dewatering performance of belt press. First, dewatering properties of waterworks sludge was analyzed by monthly. The sludge of a water shortage season contained a high organic content which led to be difficult to dewater the cake, the other side the sludge of rainwater season was ease to dewater because of low organic content. According to the results to analysis the water content of dewatered cake produced from two equipments on the base of the seasonal dewatering properties, the water content of dewatered cake produced from thermal dewatering for sludge of water shortage season was $41.6{\sim}48.3$ wt% and $71{\sim}84$ wt% from belt press. In the case of rainwater season, the water content of dewatered cake produced from thermal dewatering was $34{\sim}37.7$ wt% and $57{\sim}70$ wt% from belt press. It was understood that thereduction of water content of cake by thermal dewatering was larger than belt press. The economical aspect for two equipments was evaluated on considering the reduction of cake treatment amount as the decrease of water content of cake. When putting the cost index of thermal dewatering into 100, belt press was 121. This meant that thermal dewater was more economical than belt press by about 20% in the side of construction and operation. In conclusion, thermal dewatering equipment was estimated by producing the low water content dewatered cake as well as being operated with low coat.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.345-350
• /
• 2012

To investigate the exposure and health risk assessment for the residents near the D-asbestos mine in Chungbuk, Korea. We analyzed asbestos in the 20 ambient air and 23 activity based samples near the mine. The airborne sample results are showed that 8 of 20 samples ranged between 0.0025 to 0.0029 f/cc (fiber per cubic centimeter) and the others were below the detection limit by phase contrast microscopy (PCM). In addition, asbestos fibers were under the detection limit or not being by transmission electron microscopy (TEM). Based on interview and survey targeting the local residents, we made the activity based sampling (ABS) scenarios fit to the conditions of field. At the same time, we calculated the excess lifetime cancer risk (ELCR) of these ABS scenarios according to the ELCR average value and 95% upper confidence limit (UCL). At the case of weed whacking, soil digging and sweeping yard scenario, 95% UCL of ELCR exceeded the $1{\times}10^{-4}$, acceptable risk range for exposure. Based on our study results, it is necessary safety measures such as risk communication, abatement or management of naturally occurring asbestos (NOA).

• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.279-290
• /
• 2006

The borehole radar methods used to tunnel detection are mainly classified into borehole radar reflection, directional antenna, crosshole scanning, and radar tomography methods. In this study, we have investigated the feasibility and limitation of each method to tunnel detection through case studies. In the borehole radar reflection data, there were much more clear diffraction signals of the upper wings than lower wings of the hyperbolas reflected from the tunnel, and their upper and lower wings were spreaded out to more than 10m higher and lower traces from the peaks of the hyperbolas. As the ratio of borehole diameter to antenna length increases, the ringing gets stronger on the data due to the increase in the impedance mismatching between antennas and water in the boreholes. It is also found that the reflection signals from the tunnel could be enhanced using the optimal offset distance between transmitter and receiver antennas. Nevertheless, the borehole radar reflection data could not provide directional information of the reflectors in the subsurface. Direction finding antenna system had a advantage to take a three dimensional location of a tunnel with only one borehole survey even though the cost is still very high and it required very high expertise. The data from crosshole scanning could be a good indicator for tunnel detection and it could give more reliable result when the borehole radar reflection survey is carried out together. The images of the subsurface also can be reconstructed using travel time tomography which could provide the physical property of the medium and would be effective for imaging the underground structure such as tunnels. Based on the results described above, we suggest a cost-effective field procedure for detection of a tunnel using borehole radar techniques; borehole radar reflection survey using dipole antenna can firstly be applied to pick up anomalous regions within the borehole, and crosshole scanning or reflection survey using directional antenna can then be applied only to the anomalous regions to detect the tunnel.

• Journal of agricultural medicine and community health
• /
• v.17 no.1
• /
• pp.34-45
• /
• 1992

In this county, the gap between the urban 'haves' and the rural 'have-nots' continues to be an increasing problem. WHO and UNICEF see primary health care(PHC) as the key to achieving an acceptable level of health throughout the world as a community development. PHC is essential health care made accessible to individuals and families in the community by means acceptable to them. It is the first level of contact of individual, the family, and community with the national health system. It includes at least education on health system. It includes at least education on health problems, promotion of food supply, MCH including family planning, immunization against infectious diseases, control of endemic diseases, treatment of common diseases and injuries, promotion of mental health, and provision of essential drugs. However, of the aboves, education concerning of mental health problems and the methods to identify, prevent, and control them is the principal step of establishment. In Korea, the category of PHC worker includes the physician as public doctor and nurse as primary health care practitioner and community health leader as village health worker. PHC workers of the aboves will thus function best if they are appropriately trained to respond to the health needs of the community. However in this country, since the national PHC service project launched in 1980, the government has not developed and performed appropriate and enough education and training activities. In light of above reasons, several categories of health education activities had been planned and performed being aimed at above specific target groups and the main focus was on the village health workers for about one year from July 1991 to July 1992 in Yeoju Kun of Kyonki Province. At the end of the period, evaluation of education input was carried out to measure the improvement of healthful life of people in terms of awareness, attitude, and practice. At the end of the period, evaluation of education input was carried out to measure the improvement of healthful life of people in terms of awareness, attitude, and practice. The totals of 80 village health workers, 13 public health practitioners and 9 public docters took in the course of health education for a few hours at every month and the evaluation works of educational effect were taken. The results the study were as follows. 1) Number of persons who realized the maxim "health care of the people is a duty of the government" increased after the education course, On the other hand, the rate of satisfaction on the effort of government for health promotion of the people decreased. 2) Public doctors and primary health care practitioners(nurses) liked and enjoyed the education schedule as a meeting of peer group. It provided chances of communication with staffs of Korea University Hospital. It was said that lectures covered great deal of knowledge and technic they urgently needed in the field. 3) After finishing the education course, more of village health workers(VHW) thought they adapted themselves to their roles and functions showing increased number of home visit and contact with primary health care practitioners by month. 4) In case of patient refer, VHW preferred primary health care practitioners to public doctors. 5) Capability of VHWs in most of their functions increased dramatically after when the education course finished except tuberculosis control.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.170-175
• /
• 2013

This study was conducted to investigate the effect on the habitation of Monochamus alternatus, a vector insect of Pine wood nematode by the tended sound stumps for the developing forestry control methods of Pine wilt disease controls. Field cage plots (1 m ${\times}$ 1 m ${\times}$ 1 m) were established 12 units (Experiment1:4 units, Experiment2:8 Units) and were treated 4 kinds(February in 2010, February, April, June in 2011). The adults of M. alternatus were put into 4~5couples each the cage June in 2011. Presence or absence of the larva entrance holes and larva were detailed November in 2011. The larva were appeared in the sound stumps of sapling and young trees tended at February, April, June, the current emergence year of M. alternatus, but were not appeared in the sound stumps of sapling and young trees tended February in 2010, one year before the emergence of M. alternatus. The larva habitated in stumps of sapling were likely to be smaller in size in compare to the larva in stumps of young trees. In case of young tree, the larva were found at the cleft part of bark, but were not found at ridge part of bark. All observed larva appeared at part of bark and between the bark and the woody parts, but were not found at the woody parts. To develop the control guiding principal of sound stump after forest tending practice, further experiment need is in existence oviposition and larvae of vectors by height of stemps.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.279-284
• /
• 2012

The X ray has been widely used in both diagnosis and treatment. Recently, a miniature X ray tube has been developed for radiotherapy. The miniature X ray tube is directly inserted into the body irradiated, so that X rays can be guided to a target at various incident angles according to collimator geometry and, thus, minimize patient dose. If such features of the miniature X ray tube can be applied to development of X ray imaging as well as radiation treatment, it is expected to open a new chapter in the field of diagnostic X ray. However, the miniature X ray tube requires an added filter and a collimator for diagnostic purpose because it was designed for radiotherapy. Therefore, a collimator and an added filter were manufactured for the miniature X ray tube, and mounted on. In this study, we evaluated beam characteristics of the miniature X ray tube for diagnostic X ray system and accuracy of measuring the HVL. We used the Si PIN Photodiode type Piranha detector (Piranha, RTI, Sweden) and estimated the HVL of the miniature X ray tube with added filter and without added filter. Through an another measurement using Al filter, we evaluated the accuracy of the HVL obtained from a direct measurement using the automatic HVL calculation function provided by the Piranha detector. As a result, the HVL of the miniature X ray tube was increased around 1.9 times with the added filter mounted on. So we demonstrated that the HVL was suitable for diagnostic X ray system. In the case that the added filter was not mounted on, the HVL obtained from use of the automatic HVL calculation function provided by Piranha detector was 50% higher than the HVL estimated using Al filter. Therefore, the HVL automatic measurement from the Piranha detector cannot be used for the HVL calculation. However, when the added filter was mounted on, the HVL automatic measurement value using the Piranha detector was approximately 15% lower than the estimated value using Al filter. It implies that the HVL automatic measurement can be used to estimate the HVL of the miniature X ray tube with the added filter mounted on without a more complicated measurement method using Al filter. It is expected that the automatic HVL measurement provided by the Piranha detector enables to make kV-X ray characterization easier.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1978.06a
• /
• pp.4.1-4
• /
• 1978

The foreign bodies in the food and air passages are frequently observed in the field of otolaryngology, and the foreign bodies in the air passages have much significance in clinical practice because they may cause sudden death. A statistical study was done on 95 cases of foreign bodies in the food and air passages who had visited department of otolaryngology, Chung-Ang university from June, 1968 to April, 1978. The results were as follows; 1. The total cases of foreign bodies in the food and air passages was 95; 89 cases (93.7%) were in the food passage and the remaining (6.3%) were in the air passage. The ratio between the food passage and air passage was about 14. 8 to 1.0. 2. In distribution by sex, 64 cases (67.4%) were in male patients and the remaining 31 cases (32.6%) were in female patients. The ratio between male and female was 2.1 to 1.0. 3. The kinds of foreign bodies in the food in the order of their frequency, were coin, gogame stone and pebble. In the air passages, the peanut and bean were most frequently found. 4. In distribution by age, 64 cases (67.4%) of all foreign bodies were found in children under 5 year old, and coin was the most common kind of foreign body. Except for meat, almost all of foreign bodies were found in children under 10 year old. 5. There was chronologically no significant tendency in incidence; the incidence, however, had decreased during recent 2 years. 6. In the location of foreign bodies in the food passage, 70 cases (78.7%) were found at the first esophageal narrowing. Meat was more frequently found at second esophageal narrowing associated with cicatrical stenosis. Almost all of foreign bodies in the air passage was found in bronchi; 3 cases were in the right side of bronchi, and 2 cases were in the left side of bronchi and 1 case was in glottic region. 7. In duration of lodgement, 50 cases (52.6%) visited our hospital within 24 hours, and 3 cases after 30 days. 8. Under topical anesthesia, 83 cases (93.3%) of the foreign bodies in the food passage were removed by esophagoscopy, by 6 cases (6.7%) failed to be removed. All of the foreign bodies of the air passages (6 cases) were removed by bronchoscopy. Among them, 5 cases under 5 years old were removed by inferior bronchoscopy through tracheostomy site.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.604-611
• /
• 2011

Several wild yeasts were isolated from Korean grape varieties before and during spontaneous fermentation. Among them, four strains were isolated based on the alcohol content and flavor production in wine after fermentation of apple juice. In this study, the four yeast strains were identified and characterized. PCR-restriction fragment length polymorphism analysis of ITS I-5.8S-ITS II region with restriction endonuclease Hae III and Hinf I resulted in that all the strains showed a typical pattern of Saccharomyces cerevisiae. Pulse field gel electrophoresis showed three different chromosome patterns with a same band between strains SS89 and SS812. When ITS I-5.8S-ITS II sequences of the four strains were compared with one another, they were similar to those of Saccharomyces cerevisiae CBS 4054 type strain. Identity of the sequences was higher than 97% with those of the type strain. Phylogenetic analysis showed based on the sequences showed they were genetically closed to the type strain. The four identified strains were tested in a medium containing 200 ppm potassium metabisulfite, and the MM10 and WW108 inhibition rates resulted at up to 24 h. The four strains were tested at an incubation temperature of $30^{\circ}C$. The 30% sugar concentration in the medium (w/v) showed the highest growth in 36 h, especially in the case of SS89, which was close to growth 40. The four strains were tested in an 8% ethanol medium (v/v). Alcohol tolerance was initially kept in the incubation process. The strains began to adapt, however, to the exceeded resistance. The four strains showed the lowest inhibition rate at 24 h.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.55-61
• /
• 2009

Recently, the number of high-rise buildings being built in Korea by major construction companies for residential and commercial use has been increasing. When constructing a high-rise building, it is necessary to apply massive amounts of concrete to form a mat foundation that can withstand the huge load of the upper structure. However, it is of increasing concern that due to limitations in terms of the amount of placing equipment, available job-sites and systems for mass concrete placement in the construction field, it is not always possible to place a great quantity of concrete simultaneously in a large-scale mat foundation, and for this reason consistency between placement lift cannot be secured. In addition, a mat foundation Is likely to crack due to the stress caused by differences inhydration heat generation time. To derive a solution for these problems, this study provides test results of a hydration heat crack reduction method by applying placement lift change and setting time control with a super retarding agent for mass concrete in a large-scale mat foundation. Mock-up specimens with different mixtures and placement liftswere prepared at the job-site of a newly-constructed high-rise building. The test results show that slump flow of concrete before and after adding the super retarding agent somewhat Increases as the target retarding time gets longer, while the air content shows no great difference. The setting time was observed to be retarded as the target retarding time gets longer. As the target retarding time gets longer, compressive strength appears to be decreased at an early stage, but as time goes by, compressive strength gets higher, and the compressive strength at 28 days becomes equal or higher to that of plain concrete without a super retarding agent. For the effect of placement lift change and super retarding agent on the reduction of hydration heat, the application of 2 and 4 placement lifts and a super retarding agent makes it possible to secure consistency and reduce temperature difference between placement lifts, while also extending the time to reach peak temperature. This implies that the possibility of thermal crack induced by hydration heat is reduced. The best results are shown in the case of applying 4 placement lifts.