• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.798-803
• /
• 2003

The objective of the present study is to investigate the changes in the acoustic source characteristics and far-field noise propagation in an incompressible round jet at Re=10000 for single-frequency excitations using large eddy simulation and Lighthill acoustic analogy. We apply excitations at a frequency corresponding to the jet-column mode ($St_{D}=0.85$) or maximum growth rate in the shear layer ( $St_{\theta}=0.017$ ). The acoustic source derived from the Lighthill acoustic analogy is the second spatial derivative of the Reynolds stresses. In the case of $St_{D}=0.85$, vortex ring and large scale structures are dominant sources, whereas in the case of $St_{\theta}=0.017$, the main sources are located at an upstream position along the shear layer than in the uncontrolled case. Also, the far-field noise propagates along the axial direction due to excitation.

• Smart Structures and Systems
• /
• 제6권9호
• /
• pp.1007-1023
• /
• 2010

This paper describes the development and evaluation of an innovative TDR distributed moisture sensor. This sensor features advantages of being responsive to the spatial variations of the soil moisture content. The geometry design of the sensor makes it rugged for field installation. Good linear calibration is obtained between the sensor measured dielectric constant and soil physical properties. Simulations by the finite element method (FEM) are conducted to assist the design of this sensor and to determine the effective sampling range. Compared with conventional types of moisture sensor, which only makes point measurement, this sensor possesses distributed moisture sensing capability. This new sensor is not only easy to install, but also measures moisture distribution with much lower cost. This new sensor holds promise to significantly improve the current field instruments. It will be a useful tool to help study the influence of a variety of moisture-related phenomena on infrastructure performance.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.82-85
• /
• 2009

Amongst society's transitional presuppositions towards the future, an aging population is the most significant matter. Korea has entered the aging society in 2000 and will face the aged society by 2018, which is the fastest time that takes from the aging society to the aged society in the world. Korea requires immediate attention to devise a countermove. U.S entered aging society in 1942 since then have developed various types of elderly housing. Recently, university-affiliated CCRC became an attractive alternative. Therefore, it is necessary to study a successful case of elderly housing. This study aims to explore the key features of a university-affiliated CCRC as an alternative socially integrated aging friendly community. Oak Hammock at the University of Florida was selected for this research as a successful case. The method of this is field visit case study. The study finds that University-affiliated CCRC has a lot of benefits for both university and CCRC. Oak Hammock members can access university's facilities and university provides a life-long learning experience and other programs. Oak Hammock provides internship, volunteer and parttime job opportunities and offer advice to students as a mentor. This study is expected to provide a implication in developing elderly housing of Korea.

• 시스템엔지니어링학술지
• /
• 제15권1호
• /
• pp.16-24
• /
• 2019

In this study, an improved method of setting the RAM goals for surveillance system using OMS/MP and field operations data of similar systems is suggested and a case study of surveillance system A is given. Newly suggested methods for setting the RAM goals consist of the procedures such as On/Off time analysis of configuration equipment based on OMS/MP, field operations data analysis of similar systems, adjustment of preventive maintenance time, the number of corrective maintenances, and TALDT in wartime, introducing new subsystem to reliability structure of surveillance system, and reflecting expert's opinion. A case study of surveillance system A shows that newly suggested method in this study for setting the RAM goals is reasonably acceptable and practically applicable to other similar systems.

• 한국군사과학기술학회지
• /
• 제19권4호
• /
• pp.453-461
• /
• 2016

The paper represents the experimental analysis of the shock noise of medium caliber guns when a projectile is passed through the shielding material. In the study, the shielding material was constructed and tested in three separate experiments. The shielding material was not installed for medium caliber gun in Case 1. A medium caliber gun was fully covered with shielding material in Case 2, and another one was put with shielding material near muzzle in Case 3. In each experiment, the experimental data was compared with each other. Results showed the firing shielding material achieved a significant noise reduction in $90^{\circ}$ to the noise source. Case 3 is confirmed to be better effective than Case 2 in the near field. But, the noise reduction in the far field is small in quantity due to the low frequency. The paper is considered that further study is necessary for the shielding material which can absorb a low frequency noise in the future.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.39-46
• /
• 2018

PURPOSES: This study is to estimate nondestructive strength equation based on probability for bridges using field test data. METHODS : In this study, a series of the field inspection and the test have been performed on 297 existing bridges, in order to evaluate the bridges, based on the test results of the in-depth inspection, and the estimated strengths by means of the nondestructive strength equations are analyzed and compared with results of the core specimen strengths. RESULTS : According to results of analyses, In case of standard design compressive strength of concrete is 18MPa, 21MPa, similar reliability of RILEM equation were 0.89~0.90, but in case of standard design compressive strength of concrete is 35MPa, 40MPa were 0.4~0.56. According to standard design compressive strength of concrete is 40MPa, similar reliability of ultrasonic pulse velocity method equation were 0.56. CONCLUSIONS :RILEM equation had high similar reliability than other equation in case of standard design compressive strength of concrete is 18MPa, 21MPa, but had low similar reliability than other equation in case of standard design compressive strength of concrete is 35MPa, 40MPa. and ultrasonic pulse velocity method equation had low similar reliability than other equation in case of standard design compressive strength of concrete is 40MPa.

• 대한전기학회논문지
• /
• 제39권7호
• /
• pp.653-667
• /
• 1990

Superconductor is consolidated, for required current capacity, with proper numbers of basic strands which are multifilamentary composites. Althouth superconductors are perfectly loss-free under DC conditions of current and field, AC losses occur under time-varying condition of the current and field. The AC losses are a controllable inherent characteristics of supercondectors. The AC losses dependent on the changing rate of current and field can be reduced by reducing the filament diameter. On the other hand, finer filament results in manufacturing cost increase. Therefore, in this paper optimization technique of superconductor for SMES is proposed from the viewpoint of AC loss reduction and manufacturing cost increase. The case study shows that the technique can be effectively used for the design of superconductor for SMES, appreciating the influence of various parameters related to superconductor itself and operating condition of SMES. As a result of the case study, it is confirmed that the technique is more effective for the design of superconductor for SMES for electric power power system stabilization rather then SMES for energy storage.

• 한국결정성장학회지
• /
• 제7권3호
• /
• pp.406-417
• /
• 1997

초크랄스키법들 의한 8인치 실리콘 단결정 성장계에 대칭과 비대칭 커스프 자장을 인가하여 결정을 성장시켰을 때 축방향으로 일정한 산소농도분포를 가질 수 있는 적절한 인가 자장의 크기와 비대칭도에 대한 수치해석적 연구를 수행하였다. 결정이 성장할 때 커스프 자장의 형태가 유지되는 방법으로 도가니의 위치를 변화시키는 방법과 인가코일의 위치를 변화시키는 방법을 비교하였다. 대칭 커스프 자장이 인가된 경우, 축방향으로 일정한 산소농도를 얻을 수 있는 자장의 강도변화는 결정이 성장함에 따라 아래로 볼록한 형태를 띠었다. 축밟향으로 일정한 산소농도분포를 갖기 위해 도가니의 위치를 변화시키는 방법과 코일의 위치를 변화시키는 방법을 비교한 결과 비슷한 산소농도의 표준편차값을 가짐을 알 수 있었다. 비대칭 자장이 인가된 경우, 축방향으로 일정한 산소농도 분포를 얻기 위해서는 비대칭도는 결정이 성장함에 따라 점차 증가하는 양상을 보였다.

• 대한수학회논문집
• /
• 제29권2호
• /
• pp.319-329
• /
• 2014

In this paper we study the properties of conformally recurrent pseudo Riemannian manifolds admitting a proper conformal vector field with respect to the scalar field ${\sigma}$, focusing particularly on the 4-dimensional Lorentzian case. Some general properties already proven by one of the present authors for pseudo conformally symmetric manifolds endowed with a conformal vector field are proven also in the case, and some new others are stated. Moreover interesting results are pointed out; for example, it is proven that the Ricci tensor under certain conditions is Weyl compatible: this notion was recently introduced and investigated by one of the present authors. Further we study conformally recurrent 4-dimensional Lorentzian manifolds (space-times) admitting a conformal vector field: it is proven that the covector ${\sigma}_j$ is null and unique up to scaling; moreover it is shown that the same vector is an eigenvector of the Ricci tensor. Finally, it is stated that such space-time is of Petrov type N with respect to ${\sigma}_j$.

• 품질경영학회지
• /
• 제40권3호
• /
• pp.278-285
• /
• 2012

Purpose: Weapon systems have the long life cycle unlike the consumer product. Thus, the reliability of weapon system is improved during the life cycle through the steady technical change. In this paper, we deal with the method of evaluating the reliability of weapon system with the field failure data. Methods: Especially, we present how to gather the field failure data and evaluate the reliability through the case of K-series weapon system. To evaluate reliability, the reliability growth model is used and the result is discussed. Results: It is steadily improved the reliability of K-series weapon system deployed from 2000 to 2004. The frequency of the failures that affect the mission is largely reduced and MTBMF(mean time between mission failure) is also improved. Conclusion: We can guess the trend of the reliability of weapon system with the field data through this study. Furthermore, it can be used to improve the reliability and make maintenance policy.