• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.798-803
• /
• 2003

The objective of the present study is to investigate the changes in the acoustic source characteristics and far-field noise propagation in an incompressible round jet at Re=10000 for single-frequency excitations using large eddy simulation and Lighthill acoustic analogy. We apply excitations at a frequency corresponding to the jet-column mode ($St_{D}=0.85$) or maximum growth rate in the shear layer ( $St_{\theta}=0.017$ ). The acoustic source derived from the Lighthill acoustic analogy is the second spatial derivative of the Reynolds stresses. In the case of $St_{D}=0.85$, vortex ring and large scale structures are dominant sources, whereas in the case of $St_{\theta}=0.017$, the main sources are located at an upstream position along the shear layer than in the uncontrolled case. Also, the far-field noise propagates along the axial direction due to excitation.

• Smart Structures and Systems
• /
• v.6 no.9
• /
• pp.1007-1023
• /
• 2010

This paper describes the development and evaluation of an innovative TDR distributed moisture sensor. This sensor features advantages of being responsive to the spatial variations of the soil moisture content. The geometry design of the sensor makes it rugged for field installation. Good linear calibration is obtained between the sensor measured dielectric constant and soil physical properties. Simulations by the finite element method (FEM) are conducted to assist the design of this sensor and to determine the effective sampling range. Compared with conventional types of moisture sensor, which only makes point measurement, this sensor possesses distributed moisture sensing capability. This new sensor is not only easy to install, but also measures moisture distribution with much lower cost. This new sensor holds promise to significantly improve the current field instruments. It will be a useful tool to help study the influence of a variety of moisture-related phenomena on infrastructure performance.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.82-85
• /
• 2009

Amongst society's transitional presuppositions towards the future, an aging population is the most significant matter. Korea has entered the aging society in 2000 and will face the aged society by 2018, which is the fastest time that takes from the aging society to the aged society in the world. Korea requires immediate attention to devise a countermove. U.S entered aging society in 1942 since then have developed various types of elderly housing. Recently, university-affiliated CCRC became an attractive alternative. Therefore, it is necessary to study a successful case of elderly housing. This study aims to explore the key features of a university-affiliated CCRC as an alternative socially integrated aging friendly community. Oak Hammock at the University of Florida was selected for this research as a successful case. The method of this is field visit case study. The study finds that University-affiliated CCRC has a lot of benefits for both university and CCRC. Oak Hammock members can access university's facilities and university provides a life-long learning experience and other programs. Oak Hammock provides internship, volunteer and parttime job opportunities and offer advice to students as a mentor. This study is expected to provide a implication in developing elderly housing of Korea.

• Journal of the Korean Society of Systems Engineering
• /
• v.15 no.1
• /
• pp.16-24
• /
• 2019

In this study, an improved method of setting the RAM goals for surveillance system using OMS/MP and field operations data of similar systems is suggested and a case study of surveillance system A is given. Newly suggested methods for setting the RAM goals consist of the procedures such as On/Off time analysis of configuration equipment based on OMS/MP, field operations data analysis of similar systems, adjustment of preventive maintenance time, the number of corrective maintenances, and TALDT in wartime, introducing new subsystem to reliability structure of surveillance system, and reflecting expert's opinion. A case study of surveillance system A shows that newly suggested method in this study for setting the RAM goals is reasonably acceptable and practically applicable to other similar systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.453-461
• /
• 2016

The paper represents the experimental analysis of the shock noise of medium caliber guns when a projectile is passed through the shielding material. In the study, the shielding material was constructed and tested in three separate experiments. The shielding material was not installed for medium caliber gun in Case 1. A medium caliber gun was fully covered with shielding material in Case 2, and another one was put with shielding material near muzzle in Case 3. In each experiment, the experimental data was compared with each other. Results showed the firing shielding material achieved a significant noise reduction in $90^{\circ}$ to the noise source. Case 3 is confirmed to be better effective than Case 2 in the near field. But, the noise reduction in the far field is small in quantity due to the low frequency. The paper is considered that further study is necessary for the shielding material which can absorb a low frequency noise in the future.

• International Journal of Highway Engineering
• /
• v.20 no.3
• /
• pp.39-46
• /
• 2018

PURPOSES: This study is to estimate nondestructive strength equation based on probability for bridges using field test data. METHODS : In this study, a series of the field inspection and the test have been performed on 297 existing bridges, in order to evaluate the bridges, based on the test results of the in-depth inspection, and the estimated strengths by means of the nondestructive strength equations are analyzed and compared with results of the core specimen strengths. RESULTS : According to results of analyses, In case of standard design compressive strength of concrete is 18MPa, 21MPa, similar reliability of RILEM equation were 0.89~0.90, but in case of standard design compressive strength of concrete is 35MPa, 40MPa were 0.4~0.56. According to standard design compressive strength of concrete is 40MPa, similar reliability of ultrasonic pulse velocity method equation were 0.56. CONCLUSIONS :RILEM equation had high similar reliability than other equation in case of standard design compressive strength of concrete is 18MPa, 21MPa, but had low similar reliability than other equation in case of standard design compressive strength of concrete is 35MPa, 40MPa. and ultrasonic pulse velocity method equation had low similar reliability than other equation in case of standard design compressive strength of concrete is 40MPa.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.7
• /
• pp.653-667
• /
• 1990

Superconductor is consolidated, for required current capacity, with proper numbers of basic strands which are multifilamentary composites. Althouth superconductors are perfectly loss-free under DC conditions of current and field, AC losses occur under time-varying condition of the current and field. The AC losses are a controllable inherent characteristics of supercondectors. The AC losses dependent on the changing rate of current and field can be reduced by reducing the filament diameter. On the other hand, finer filament results in manufacturing cost increase. Therefore, in this paper optimization technique of superconductor for SMES is proposed from the viewpoint of AC loss reduction and manufacturing cost increase. The case study shows that the technique can be effectively used for the design of superconductor for SMES, appreciating the influence of various parameters related to superconductor itself and operating condition of SMES. As a result of the case study, it is confirmed that the technique is more effective for the design of superconductor for SMES for electric power power system stabilization rather then SMES for energy storage.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.406-417
• /
• 1997

A numerical study was conducted on the optimum magnetic field intensity and asymmetric factor for uniform axial oxygen concentration in 8 inch silicon single crystal growing process by magnetic Czochralski method. For constant shape of cusp field, a change of coil and crucible position were compared. In case of symmetric cusp field, magnetic field intensity variation shows concave downward with crystal growing for uniform, axial oxygen concentration. A numerical results show similar value of standard deviation of average oxygen concentration for uniform oxygen concentration between coil and crucible position change. In case of asymmetric cusp field. asymmetric factor is increased with crystal growing to have uniform oxygen concentration.

• Communications of the Korean Mathematical Society
• /
• v.29 no.2
• /
• pp.319-329
• /
• 2014

In this paper we study the properties of conformally recurrent pseudo Riemannian manifolds admitting a proper conformal vector field with respect to the scalar field ${\sigma}$, focusing particularly on the 4-dimensional Lorentzian case. Some general properties already proven by one of the present authors for pseudo conformally symmetric manifolds endowed with a conformal vector field are proven also in the case, and some new others are stated. Moreover interesting results are pointed out; for example, it is proven that the Ricci tensor under certain conditions is Weyl compatible: this notion was recently introduced and investigated by one of the present authors. Further we study conformally recurrent 4-dimensional Lorentzian manifolds (space-times) admitting a conformal vector field: it is proven that the covector ${\sigma}_j$ is null and unique up to scaling; moreover it is shown that the same vector is an eigenvector of the Ricci tensor. Finally, it is stated that such space-time is of Petrov type N with respect to ${\sigma}_j$.

• Journal of Korean Society for Quality Management
• /
• v.40 no.3
• /
• pp.278-285
• /
• 2012

Purpose: Weapon systems have the long life cycle unlike the consumer product. Thus, the reliability of weapon system is improved during the life cycle through the steady technical change. In this paper, we deal with the method of evaluating the reliability of weapon system with the field failure data. Methods: Especially, we present how to gather the field failure data and evaluate the reliability through the case of K-series weapon system. To evaluate reliability, the reliability growth model is used and the result is discussed. Results: It is steadily improved the reliability of K-series weapon system deployed from 2000 to 2004. The frequency of the failures that affect the mission is largely reduced and MTBMF(mean time between mission failure) is also improved. Conclusion: We can guess the trend of the reliability of weapon system with the field data through this study. Furthermore, it can be used to improve the reliability and make maintenance policy.