• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2009

The Ministry of Land, Transport and Maritime Affairs(MLTM) project for the DB construction of national geotechnical information was automatically computerized the geotechnical investigation results on the construction site in 2007. So 'the rule for computerizing of geotechnical investigation results and its application' were promoted the establishment and applicable project. It was promoted in earnest that all organization and affiliation of MLTM, local governments included the project because of stabilization of the law from 2008. We have analyzed a application-ratio of geotechnical information about users of geotechnical information system and distribution data and established a plan of applying enhancement for the DB construction and DB utilization in 2008. In this paper, we propose the result for application-ratio analysis and application plan through the application-case study of national geotechnical information DB. In the application-ratio analysis, the analysis in the field shows the most high as 39% in construction planning and preliminary investigation, the analysis in the effect of capabilities shows the most high as 25% in the increased efficiency of business. Also the analysis in the field of application shows the most high as 95% a application-ratio of geotechnical information in architecture and civil.

• Journal of the Korean Society of Costume
• /
• v.66 no.6
• /
• pp.149-157
• /
• 2016

For the Korean fashion industry to become more competitive, not only does it need to develop a higher value-added fashion products, but also needs to raise creative and professional talented people. The purpose of this study is to propose ways to develop new curriculum for education in the fashion design field by analyzing the degree of recognition about the importance of curriculum in fashion design. Based on the curriculums of fashion design field of universities, a survey was conducted using a questionnaire to measure the degree of importance and the degree of application for the curriculum of fashion design field. The study gathered data from 235 students from 6 universities in Seoul. Major conclusions of the study are as follows: First, preferred career courses after graduation were fashion designer for woman's or menswear, patterner. Second, clothing construction field is considered to be the most important subject in the present, while material planning field is considered to become the most important in the future. The fashion design field was evaluated as an important field in the present and the future. Third, fashion design, accessory design, fashion design CAD, fashion illustration were evaluated as important subjects and highly available for career. Fourth, fashion design CAD, fashion illustration, and textile design were evaluated as the courses that needed more emphasis. Flat sketch, spec sheet, on-the-job training were needed to be included. Fashion designer, and patterner were preferred for career courses. Clothing construction, material planning, and fashion design were evaluated as important fields. Accessory design, fashion design CAD, and fashion illustration were evaluated as important and highly available subjects for career. For the new curriculum in the fashion design field, more courses on fashion design CAD, fashion illustration, textile design and on-the-job training are needed.

• Journal of Korea Multimedia Society
• /
• v.23 no.3
• /
• pp.440-446
• /
• 2020

The application field of smart terminals is increasing and its application is also spreading in the defense field. The use of smart terminal based map application is very important in battle fields. The problem is that the communication infrastructure is easy to collapse and the use of GPS is usually disturbed. In this paper, we studied the maps stored in the QR tag at the battle field. The problem is to abstract the map information so that it can be stored in the small QR tag. We have abstracted path information on a vector basis and require only a small amount of data compared to imaged path information. We analyzed the amount of data generated by the abstraction and mathematically analyzed the boundary where the amount does not exceed the capacity limit of the QR tag. Our research can be applied not only to battlefields, but also to disaster / disaster scenes, or in environments with difficult Internet communications, such as mountainous areas.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.127-135
• /
• 2013

PURPOSES : The purpose of this study is development of automatic equipment to measure the road water-reservoir which can be one of factors for road traffic safety inspection and its application to safety analysis. METHODS : The scopes of this study are the examination of the riskiness and location of road water-reservoir through literature review, development of appropriate sensor and automatic equipment to survey the road water-reservoir and evaluation of field application. RESULTS: The laser lighting and IR camera were selected to develop the equipment. It was found from the field calibration that there is a high correlation between rutting and road water-reservoir and road water-reservoir caused by rutting can be correctly calculated. About 20.2km of national highway were inspected for case study and field application. It was found from correlation of traffic incident that 2.08km of the latent length for water-reservoir which is related to 12 traffic incidents were analyzed. CONCLUSIONS : This technique can be utilized evaluation method for road condition such as road water-reservoir for conventional evaluation system such as road traffic safety assessment and safety analysis and it can be use to new evaluation system to apply various road condition and traffic condition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.653-653
• /
• 2013

In this study, ITO extended gate reduced graphene oxide field effect transistor (rGO FET) was demonstrated as a transducer for a proton sensing application. In this structure, the sensing area is isolated from the active area of the device. Therefore, it is easy to deposit or modify the sensing area without affecting on the device performance. In this case, the ITO extended gate was used as a gate electrode as well as a proton sensing material. The proton sensing properties based on the rGO FET transducer were analyzed. The rGO FET device showed a high stability in the air ambient with a TTC encapsulation layer for months. The device showed an ambipolar characteristic with the Dirac point shift with varying the pH solutions. The sensing characteristics have offered the potential for the ion sensing application.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.179-180
• /
• 2008

In this paper, the variable tendency piezoelectric constant and resonance characteristics piezoelectric ceramics due to the electric field is studied. The practical application of piezoelectric ceramics is not only applied in field of small signal. For example, in case of an ultrasonic motor, $120{\sim}130Vrms$ of driving voltage is needed and that of an piezoelectric pump, $200{\sim}220Vrms$ of voltage is required. Therefore, to examine the characteristics of piezoelectric ceramics in large signal contributes to reducing the susceptibility to the multifarious application and securing the ease of the production of control circuit. These contributions may be connected to the expansion of industrial application. We fabricated disk-type piezoelectric ceramic samples by using conventional method and measured the resonance characteristics of these samples under from low to high voltage driving conditions. According to increasing the value of the input voltage, we measured the resonance frequency of the piezoelectric ceramic, and inquired into the cause of these phenomena.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.130-142
• /
• 2016

BIM library, as a systematic collection of BIM objects where the building information is stored, is a vital factor to construct the BIM based work environment. However, construction business is faced the problems relating BIM library such as the absence of the standard for establishing BIM library, the discontinuity of BIM library's compatibility and the lack of practice applicable BIM library. These problems cause the decreasing work efficiency and the recreating BIM model, by delivering inefficient information required in each stage and application field. The purpose of this study is to suggest the integrated management system for property information of BIM library in order to minimize the reworking and to manage information of each stage and application field when exchanging and sharing information. To achieve this, the BIM information classification, the criteria of property requirements for information exchange in BIM application field and the BIM library management system are developed. This study could contributes to ensuring the reliability and accuracy of results of BIM based analysis and to enhancing the speed of business process with sharing and exchanging building information utilizing a single BIM model.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1196-1202
• /
• 2007

In construction of high speed railway, the fan shape is limited to achieve reduction of required travel time and concrete railway which has structural stability and induces small maintenance cost with allowable ground settlement is recently applied. So construction of concrete railway on soft ground in which considerable ground settlement occurs increases and settlement management in soft ground section is required. Field monitoring on ground movement and integrated geotechnical information system which manages construction, design, and field monitoring data are essential for settlement management of concrete railway subgrade. Site investigation data are also required due to future repair work. Therefore in this study, integrated geotechnical information system for construction and maintenance of concrete railway is developed. The developed system consists of a database and an application program. The database contains site investigation, construction, design, and field monitoring data throughout a railway. Application program performs various functions on managing and utilizing information in the database with graphic visualization of output. And by providing integrating information with comprehensible visual displays, the applicability and effectiveness of the developed system for construction and maintenance management were confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.4
• /
• pp.934-940
• /
• 2014

Recently, the emergence of a variety of devices to be able to access web have brought many technological changes in the field of web development. However some web sites are still operating with a focus on computers, especially exclusive and slow developing job training related web sites which utilize a User Interface that targets only PCs. In this paper, we propose the job training management system which has a menu configuration and functions to be applied to a variety of devices, and also an applicable technologies for training students to access more easily. Finally, we evaluated its efficiency by applying the implemented system in the actual field.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.2
• /
• pp.135-140
• /
• 2003

As a construction technique is developed recently, the construction space and construction period are considered to important matters. Especially, in case of construction period, several method is proposed for strength control in the construction field. However there are very little strength control models for application of internal condition. The purpose of this study is to develop a strength control model for application of variety internal condition at construction field. The results are as follows ; 1) According to the results of compressive strength of concrete evaluated by logistic curve and proposed curve, proposed curve is applicable of construction field because there is similar relation with logistic curve. 2) It is shown that the construction period is shortened by reduction of the formwork removal time, because a predicted compressive strength of using the new curve is higher than the proposed compressive strength of standard.