• Smart Structures and Systems
• /
• v.25 no.2
• /
• pp.155-167
• /
• 2020

This paper demonstrates a real-time hybrid substructuring (RTHS) shake table test to evaluate the seismic performance of a base isolated building. Since RTHS involves a feedback loop in the test implementation, the frequency dependent magnitude and inherent time delay of the actuator dynamics can introduce inaccuracy and instability. The paper presents a robust stability and performance analysis method for the RTHS test. The robust stability method involves casting the actuator dynamics as a multiplicative uncertainty and applying the small gain theorem to derive the sufficient conditions for robust stability and performance. The attractive feature of this robust stability and performance analysis method is that it accommodates linearized modeled or measured frequency response functions for both the physical substructure and actuator dynamics. Significant experimental research has been conducted on base isolators and dampers toward developing high fidelity numerical models. Shake table testing, where the building superstructure is tested while the isolation layer is numerically modeled, can allow for a range of isolation strategies to be examined for a single shake table experiment. Further, recent concerns in base isolation for long period, long duration earthquakes necessitate adding damping at the isolation layer, which can allow higher frequency energy to be transmitted into the superstructure and can result in damage to structural and nonstructural components that can be difficult to numerically model and accurately predict. As such, physical testing of the superstructure while numerically modeling the isolation layer may be desired. The RTHS approach has been previously proposed for base isolated buildings, however, to date it has not been conducted on a base isolated structure isolated at the ground level and where the isolation layer itself is numerically simulated. This configuration provides multiple challenges in the RTHS stability associated with higher physical substructure frequencies and a low numerical to physical mass ratio. This paper demonstrates a base isolated RTHS test and the robust stability and performance analysis necessary to ensure the stability and accuracy. The tests consist of a scaled idealized 4-story superstructure building model placed directly onto a shake table and the isolation layer simulated in MATLAB/Simulink using a dSpace real-time controller.

• Archives of Plastic Surgery
• /
• v.44 no.3
• /
• pp.223-227
• /
• 2017

Background Carpal tunnel release is one of the most common surgical procedures performed by hand surgeons. The authors created a surgical simulation of open carpal tunnel release utilizing a mobile and rehearsal platform app. This study was performed in order to validate the simulator as an effective training platform for carpal tunnel release. Methods The simulator was evaluated using a number of metrics: construct validity (the ability to identify variability in skill levels), face validity (the perceived ability of the simulator to teach the intended material), content validity (that the simulator was an accurate representation of the intended operation), and acceptability validity (willingness of the desired user group to adopt this method of training). Novices and experts were recruited. Each group was tested, and all participants were assigned an objective score, which served as construct validation. A Likert-scale questionnaire was administered to gauge face, content, and acceptability validity. Results Twenty novices and 10 experts were recruited for this study. The objective performance scores from the expert group were significantly higher than those of the novice group, with surgeons scoring a median of 74% and medical students scoring a median of 45%. The questionnaire responses indicated face, content, and acceptability validation. Conclusions This mobile-based surgical simulation platform provides step-by-step instruction for a variety of surgical procedures. The findings of this study help to demonstrate its utility as a learning tool, as we confirmed construct, face, content, and acceptability validity for carpal tunnel release. This easy-to-use educational tool may help bring surgical education to a new- and highly mobile-level.

• Research in Community and Public Health Nursing
• /
• v.28 no.3
• /
• pp.324-333
• /
• 2017

Purpose: The purpose of this study was to develop a simulation module for teaching home health care and evaluate the applicability of the program to nursing students' practical training. Methods: The simulation module was developed based on the National League for Nursing Jeffries Simulation Theory. The theme of the developed scenario was teaching nasogastric tube feeding to the caregiver of patient with Parkinson disease. Participants were 61 nursing students who had learned tube feeding, and participated in the questionnaire survey after the simulation training. Results: The evaluation of simulation design showed the highest score on feedback/guided reflection, and was highly evaluated in the order of objectives/information, problem solving and fidelity. The educational practice of the simulation was highly evaluated in the order of active learning, high expectation and diversity of learning. The nursing students showed high satisfaction and self-confidence after the simulation education. Conclusion: We suggest that the developed simulation module can be applied to practical training for home health care. In the future, the change of self-efficacy, clinical judgment and performance ability of the students after the simulation education should be identified. Also, various simulation modules related to the community health nursing competencies should be continuously developed and verified.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.4
• /
• pp.310-315
• /
• 2015

Purpose: The purpose of this study was to measure the tightening torque for dental implant in dental laboratory and to analyze of the effects of different tightening torque. Materials and Methods: The tightening torque for dental implant in dental laboratory were measured by digital torque gauge. The length of abutment and analog were measured as tightening torque of manufacturer's instructions and the measured value. And the data were statically analyzed. Results: The mean tightening torque of implant screw in dental laboratory was $1.563{\pm}0.332Ncm$. The external type implant system of total length were showing no significant differences but the internal type implant system had difference significant (P < 0.05) when compared with tightening torque. Conclusion: The implant prosthesis should be made under manufacturer's instructions especially as tightening torque of screw. For the fidelity of implant prosthesis, dental technician should learn how to use the torque gauge.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.136-142
• /
• 2016

This paper presents a non-local means (NLM) denoising algorithm based on a new weighting function using a mixed norm. The fidelity of the difference between an anchor patch and the reference patch in the NLM denoising depends on noise level and local activity. This paper introduces a new weighting function based on a mixed norm type of which the order is determined by noise level and local activity of an anchor patch, so that the performance of the NLM denoising can be enhanced. Experimental results demonstrate the objective and subjective capability of the proposed algorithm. In addition, it was verified that the proposed algorithm can be used to improve the performance of the other $l_2$ norm based non-local means denoising algorithms

• Journal of the Korean Home Economics Association
• /
• v.17 no.1
• /
• pp.30-44
• /
• 1979

The main objective of the present study is to examine the traditional concepts of women's virtues which originated mainly from Confucian ethical thoughts. According to Naefoon, a moral text for women which was highly respected in the Yangban society of Yi dynasty, the main virtues for women were as follows : 1. Fidelity ; A woman had to be faithful for life to only one man who was, or was going to be, her husband. 2. Filial piety ; Sons and daughters were supposed to dedicate their hearty love and respect to their parents, parents in law, and whole ancestors. 3. Obedience ; A woman was required to be completly obedient to her husband as well as to her father. She was also supposed to be obident even to her sons when she was old. 4. Diligence and Thrift ; It was highly advisable for a woman to work hard for household matters. 5. Hospitality ; Hearty hospitality for domestic guests was one of the main duties of women in traditional Korean society. 6. Maternal wisdom ; a mother was supposed to be both stern and merciful to her children. 7. Kindness to relatives ; Special Kindness to her husband's relatives was required as a duty to a married woman. The above mentioned seven main virtues cannot be said to be fit , as such to the contemporary Korean society. Many of them are unacceptable when we evaluate them form the democratic viewpoint . But we still find some valuable ideas at the bottom of the concepts of these virtues. If we properly modify them so that they fit to our own age, they might become a source of wisdom even for the contemporary moral life. It's tried to give some suggestions concerning how to modify the concepts of women's virtues in question, and them gave a sketch of an ideal figure of women in this industrial society.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.57-65
• /
• 2009

An efficient and high-fidelity design approach for wing-body shape optimization is presented. Depending on the size of design space and the number of design of variable, aerodynamic shape optimization process is carried out via different optimization strategies at each design stage. In the first stage, global optimization techniques are applied to planform design with a few geometric design variables. In the second stage, local optimization techniques are used for wing surface design with a lot of design variables to maintain a sufficient design space with a high DOF (Degree of Freedom) geometric change. For global optimization, Kriging method in conjunction with Genetic Algorithm (GA) is used. Asearching algorithm of EI (Expected Improvement) points is introduced to enhance the quality of global optimization for the wing-planform design. For local optimization, a discrete adjoint method is adopted. By the successive combination of global and local optimization techniques, drag minimization is performed for a multi-body aircraft configuration while maintaining the baseline lift and the wing weight at the same time. Through the design process, performances of the test models are remarkably improved in comparison with the single stage design approach. The performance of the proposed design framework including wing planform design variables can be efficiently evaluated by the drag decomposition method, which can examine the improvement of various drag components, such as induced drag, wave drag, viscous drag and profile drag.

• Journal of Science of Art and Design
• /
• v.1
• /
• pp.95-123
• /
• 1999

The goal of this research is a visual and auditory tool development enabling designers to have the same emotional value with users in the process of user centered design. Through the research, we intend to show the aid measure for making cognitive gaps narrow between users and designer in the process of transforming and understanding the emotional needs as a verbal image. because In the business practice of design, most of tools and techniques for assessment and analysis of emotional needs are those used usually in the marketing fields. So the information generated and transformed from users to designers have a form of physical words. When the designer's understanding of the emotional needs is considered as a product mediated communication process, the morphologic and cognitive information gaps become obvious. This difference could be a false basis in designing with emotional user needs. So the alternative needs assessment sub-tools of visual and auditory information form was embodied mainly for designer's cognitive gaps and inter-cultural emotional needs assessment. As the method of embodiment, Firstly, adjectives related to emotion were classified in their cognitive dimension. Secondly, visual and auditory data were extracted, and then the relativity verified. Finally, the practicality and effectiveness were tested through the database generation. In view of the results so far achieved, 1. We could find being of the big information cognitive gaps in the verbal assessment of emotional needs between designers and users. 2. With the visual and auditory assessment tool, we could make the big cognitive gaps narrower than we expected. 3. Also, we could find the chance that the fidelity, recognition, and friendliness of design for emotional user needs would become better.

• Journal of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.43-48
• /
• 2003

We introduce and describe performance of the 6-meter telescope of Seoul Radio Astronomy Observatory (SRAO). All the softwares and instruments except the antenna structure and its driving system are developed for ourselves. The SIS mixer type receiver resulted in the receiver noise temperature less than 50 K (DSB) over the whole 3-mm radio window. An autocorrelation spectrometer, developed first in Korea, provides maximum 50 MHz band width over 1024 channels. Antenna surface is measured and adjusted using template method and radio holography which resulted in a superb surface accuracy bet-ter than 30${\mu}m$. Accordingly, the aperture and beam efficiences amount to $70\%$ and $75\%$, respectively, largely independent of frequency in the 85 - 115 GHz range. It is also found that telescope pointing errors are less than 10" in both azimuth and elevation and that antenna gain is almost constant against elevation greater than $20^{\circ}$, without adjusting sub-reflector position. The SRAO 6-meter telescope is now fully operational and all these characteristics verify that observations are carried out with high precision and fidelity.

• Korean Journal of Head & Neck Oncology
• /
• v.33 no.2
• /
• pp.9-15
• /
• 2017

The recently released the $8^{th}$ edition of the American Joint Committee on Cancer (AJCC) Staging Manual introduces significant modifications from the prior $7^{th}$ edition. In this paper, the contents of the new changes in the decision of cancer of the head and neck is summarized except changes in staging of skin and thyroid cancer. In addition to the 8th edition, 1) Addition of extracapsular involvement in metastatic lymph nodes (N category) 2) Oral cancer T classification change, 3) Staging of the pharyngeal cancer was divided into 3 chapters: high-risk human papilloma virus (HR-HPV) associated oropharyngeal cancer (OPC), non HR-HPV associated OPC and hypopharynx cancer (HPC), and nasopharynx cancer (NPC) 4) Changes in T and N classification in NPC, 5) In the case of cancer of unknown primary, P16-positive case is defined as HR-HPV related OPC, and EBV-positive case is defined as NPC. The process that led to these changes highlights the need to collect high-fidelity cancer registry-level data that can be used to confirm prognostic observations identified in institutional data sets. Clinicians will continue to use the latest information for patient care, including scientific content of the 8th Edition Manual. All newly diagnosed cases through December $31^{st}$ 2017 should be staged with the 7th edition. The time extension will allow all partners to develop and update protocols and guidelines and for software vendors to develop, test, and deploy their products in time for the data collection and implementation of the 8th edition in 2018. The 8th edition strikes a balance between a personalized, complex system and a more general, simpler one that maintains the user-friendliness and worldwide acceptability of the traditional TNM staging paradigm.