• 대한기관식도과학회지
• /
• 제2권1호
• /
• pp.97-102
• /
• 1996

The larynx has three major functions such as protective reflex, respiration and phonation, and is richly innervated by sensory, sympathetic and parasympathetic nerves. The sensory innervation of the laryngeal mucosa, which is involved in the perception of pain, mechanical and chemical irritation, prtects the airway via various laryngeal reflexes. We studied the distribution of Substance P (SP) and Calcitonin Gene-Related Peptide (CGRP) sensory fibers in the rat's larynx using the immuno-histochemical methods. Many SP and CGRP immunoreactive fibers were found in all regions of the laryngeal mucosa except the vocal cords. SP immunoreactive fibers showed a very similar distribution to the CGRP fibers in the epithelium and submucosa. But SP immunoreactive fibers were sparser than CGRP immunoreactive fibers in distribution density. Both reactive fibers were denser in the supraglottic region than subglottic region. Especially, intraepithelial fibers displayed the densest innervation to the laryngeal surface of the epiglottis. h the subepithelium, SP and CGRP immunoreactive fibers were distributed along the wall of vessels and around the glands. The present results suggest that the regional distribution of SP and CGRP immunoreactivity may be responsible for the protective reflex function of the laryngeal inlet.

• 대한치과보철학회지
• /
• 제9권1호
• /
• pp.29-34
• /
• 1969

Occlusal force is a critical factor affecting the condition and structure of the periodontium. When the occlusal forces exceed the physiologic adaptive capacity of the tissues, tissue damage ensues. Such damage is referred to as trauma from occlusion. Excessive pressure causes compression, degeneration and realignment of the periodontal ligament fibers so that they are paralleled perpendicular to the tooth and bone. By inducing excessive occlusal forces with a high amalgam filling on rat's molar, the author observed histologic alterations of the periodontal ligament fibers by means of Hematoxylin-eosin, Van Gieson and Aldenyde fuchsin stainings. The results of the study were observed as follows: 1) The excessive occlusal forces altered arrangement of the collagenous fibers. 2) The arrangement of the oblique fibers showed appreciable differences between the control group and the group subjected to 10 days experimental trauma from occlusion. 3) The realignment of the transseptal fibers was not found. 4) The arrangement of the oblique fibers after 15 days of trauma from occusion was similar to that of 10 days experimental group. 5) The oxytalan fibers were more abundant at the cementum rather than at the alveolar bone. 6) The excessive occlusal forces produced funnel-shaped widening of the oxytalan fibers, which followed wavy course. 7) The oxytalan fibers appeared to be distributed mainly around the middle third of the root rather than that of the apical third of the root during the experimental trauma from occlusion.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.221-231
• /
• 2005

In this study, occupational exposures to man-made mineral fibers (MMMFs) including glass wool, rock wool, and continuous glass filament fibers were determined and evaluated on the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV). A total of 171 personal samples collected from 4 glass wool fiber, 2 rock wool fibers, 4 continuous filament glass fiber products manufacturing and a glass fiber and rock wool insulations using industries, and determined respirable fibers concentrations using the National Institute for Occupational Safety and Health (NIOSH) Method 7400, "B counting rule. The fiber concentrations of samples from workers installing thermal insulations in a MMMF using industry showed the highest value: geometric mean (GM) = 0.73 f/cc and maximum = 2.9 f/cc, 70% of them were above the TLV, 1 f/cc. Workers' exposure level (GM= 0.032 f/cc) in the rock wool manufacturing industries was significantly higher than those of glass wool (GM=0.012 f/cc) and continuous filament glass fibers (GM=0.010 f/cc) manufacturing industries (p<0.01). No samples were more than the TLV in the MMMF manufacturing industries. There was a significant difference among companies in airborne fiber levels.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.380-388
• /
• 2000

The porosity of polyester fibers treated with sodium hydroxide aqueous solution was investigated using a nitrogen porosimeter, and the dyeability of the treated fibers was discussed in terms of the porosity. In pore distribution, the polyester fibers treated with sodium hydroxide aqueous solution were characterized by higher amount of pores below $10\AA$ than those of the untreated fibers, and by shift of the pore size having maximum accumulated volume from $10\AA$ for the untreated fibers to $5~6\AA$. As the weight loss of the polyester fibers treated with sodium hydroxide aqueous solution increased, BET surface area and total pore volume increased linearly, but average pore size, showing some different aspect, increased steeply at earlier stage and then approached the maximum value. The dye uptakes of the polyester fibers treated with sodium hydroxide aqueous solution increased with the BET surface area, the total pore volume and the average pore size. The alkali treatment increased the surface area of polyester fibers, so that the chance of contact between the fiber and dye molecules increased. In addition, the pores created on the surface of polyester fibers by alkali treatment might act as pathways for dye molecules into the polyester fibers.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.444-452
• /
• 2000

Dense composites of titanium matrix and Al2O3 matrix with reinforcements of carbon or titanium carbide fibers were successfully fabricated by high-pressure self-combustion sintering method or combustion reacton under 30 MPa of uniaxial pressure with an aid of external heating in vaccum. It was found that the fibers were uniformly distributed in the matrix, and aligned in a phase perpendicular to the pressure axis. As a moel ratio of Ti/C or reaction time increased, the density of Ti-matrix composite increased Micro pores around fibers could be removed by using clean carbon fibers without sizing agent on their surface. The evolution of carbide fibers from carbon fibers was observed. The composition of the various phases around fibers were analyzed.

• Carbon letters
• /
• 제9권2호
• /
• pp.105-107
• /
• 2008

In this work, we employed an electroless nickel plating on glass fibers in order to enhance the electric conductivity of fibers. And the effects of metal content and plating time on the conductivity of fibers were investigated. From the results, island-like metal clusters were found on the fiber surfaces in initial plating state, and perfect metallic layers were observed after 10 min of plating time. The thickness of metallic layers on fiber surfaces was proportion to plating time, and the electric conductivity showed similar trends. The nickel cluster sizes on fibers decreased with increasing plating time, indicating that surface energetics of the fibers could become more homogeneous and make well-packed metallic layers, resulting in the high conductivity of Ni/glass fibers.

• Carbon letters
• /
• 제14권4호
• /
• pp.243-246
• /
• 2013

In this work, electroless Ni-plating on polyethylene terephthalate (PET) ultra-fine fibers surfaces was carried out to improve the electric conductivity of the fiber. The surface properties of PET ultra-fine fibers were characterized using scanning electron microscopy, X-ray diffraction, and contact angle analyses. The electric conductivity of the fibers was measured using a 4-point testing method. The experimental results revealed the presence of island-like nickel clusters on the PET ultra-fine fibers surfaces in the initial plating state, and the electric conductivity of the Ni-plated fibers was enhanced with increasing plating time and thickness of the Ni-layers on the PET ultra-fine fibers.

• Carbon letters
• /
• 제9권3호
• /
• pp.218-231
• /
• 2008

Carbon fibers are a new breed of high-strength materials which have been described as a fiber containing at least 90% carbon obtained by the controlled pyrolysis of appropriate fibers. Carbon fiber composites are ideally suited to applications where strength, stiffness, lower weight, and outstanding fatigue characteristics are critical requirements. They also can be used in the occasion where high temperature, chemical inertness and high damping are important. In recent decades, carbon fibers have found wide applications in commercial and civilian aircraft, recreational, industrial, and transportation markets. Therefore, understanding the basic structure, synthesis and physicochemical properties of carbon fibers is very important to apply them as a precursor of above applications. This review paper discuss the general information and manufacture technique of carbon fibers used for improving the performance of composite materials in various industries for the present.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.61-72
• /
• 2014

The aim of this study is to define the condition of optimal pre-treatment for preferable activated carbon fibers (ACFs), which are based on rayon fibers. This paper shows the ideal path of ACFs preparation process; implies that rayon fibers are pre-treated by various solvents with different times before the heating process. The pre-treated rayon fibers finally turned into desirable rayon fiber-based ACFs through optimal pre-treatment condition by heating processes. The thermal analysis method of pre-treated rayon fibers by thermo-gravimetry analyser (TGA) is an idealized tool, which analyzes the best thermal condition of pre-treatment process. Surface morphologies of resulting rayon fibers based ACFs were examined by scanning electron microscope(SEM). The results of TGA and SEM analyses show that the optimal pre-treatment condition for preparing ACFs was clearly defined, in terms of thermal stability and surface morphology.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.393-401
• /
• 2018

Natural fibers derived from lignocellulosic materials are considered to be more environment-friendly than petroleum-based synthetic fibers. Several natural fibers, such as seedpod fibers, have a potential for development, including kapok and balsa fibers. The characteristics of both fibers were evaluated to determine their suitability for specific valuable applications. The purpose of this study was to analyze some important fundamental properties of kapok and balsa fibers, including their dimensions, morphology, chemical components, and wettability. The results showed that the average fiber lengths for kapok and balsa were 1.63 and 1.30 cm, respectively. Kapok and balsa fibers had thin cell walls and large lumens filled with air. The kapok fiber was composed of 38.09% ${\alpha}-cellulose$, 14.09% lignin, and 2.34% wax content, whereas the balsa fiber was composed 44.62% ${\alpha}-cellulose$, 16.60% lignin, and 2.29% wax content. The characteristics of kapok and balsa fibers were examined by X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry analyses. The contact angle of the distilled water on kapok and balsa fibers was more than $90^{\circ}$, indicating that both fibers are hydrophobic with low wettability properties because of to the presence of wax on the fiber surface.