• 제목/요약/키워드: Fiber volume

검색결과 1,110건 처리시간 0.029초

한국산(韓國産) 주요(主要) 수종(樹種) 수피(樹皮)의 이학적(理學的) 성질(性質)에 관(關)한 연구(硏究) -소나무속(屬), 사시나무속(屬), 참나무속(屬)을 중심(中心)으로- (Studies on the Physical Properties of Major Tree Barks Grown in Korea -Genus Pinus, Populus and Quercus-)

  • 이화형
    • 한국산림과학회지
    • /
    • 제33권1호
    • /
    • pp.33-58
    • /
    • 1977
  • 수피(樹皮)는 원목(原木) 체적(體積)의 10~20%를 차지하고 있으며 일반적(一般的)을 운반(運搬), 제거(除去), 처리(處理)에 따른 비용에 비(比)해 효용가치(効用價値)는 적다. 뿐만아니라 세계적(世界的)인 임산자원(林産資源)의 부족(不足)에 따른 전수체이용화(全樹體利用化)의 개념이 점고(漸高)되면서부터 수피(樹皮)의 이용(利用)에 관심(關心)을 가지게 되었다. 본연구(本硏究)는 수피(樹皮)에 대(對)한 연구(硏究)가 전무(全無)한 국내(國內)의 실적(實積)에 비추어 국내주요(國內主要) 수종(樹種) 수피(樹皮)는 소나무속(屬), 사시나무속(屬), 참나무속(屬)을 대상(對象)으로 수피(樹皮)의 물리기계적(物理機械的) 성질(性質)을 구명(究明)하고 수피(樹皮)의 가능(可能)한 이용(利用) 책을 위한 기본적 성질을 밝히고자 하였다. 본(本) 연구(硏究)에서 사용(使用)한 공시수피(共試樹皮)는 서울대학교(大學校) 농과대학(農科大學) 부속연습림(附屬演習林)과 임업시험장(林業試驗場) 중부지장(中部支場) 부근에서 벌채이용(伐採利用)이 적령기(適齡期)에 달(達)하고 포고직경(胞高直徑)이 동급(同級)인 건전하고 정상적(正常的)으로 생장(生長)하는 입목(立木)의 흉고직경 부위(部位)에서 수종별(樹種別) 20주(株)씩 $200cm^2$로 채취(採取)하였다. 물리적(物理的) 성질(性質)로는 수피(樹皮) 전건비중(全乾比重), 내피(內皮) 및 외피(外皮)의 생수피(生樹皮) 함수량(含水量), 섬유포화점(纖維飽和點), 수분이력곡선(水分履歷曲線), 전수축율(全收縮率), 흡수량(吸收量), 비열(比熱), 습윤열(濕潤熱), 열전도도(熱傳導道), 열확산(熱擴散), 시차열분석(示差熱分析) 및 발열량(發熱量)을 측정(測定) 연구(硏究)하였다. 다음 기계적(機械的) 성질(性質)로는 곡강도(曲强度)와 압축강도(壓縮强度)를 측정연구(測定硏究)하였으며 본(本) 연구(硏究)에서 얻은 결론(結論)은 다음과 같다. 1. 전건비중(全乾比重)은 같은 개체(個體) 내(內)에 있어서도 목질부(木質部)와 수피간(樹皮間)에 차이(差異)가 있을 뿐아니라 수피(樹皮)에 있어서도 내피(內皮)와 외피간(外皮間)의 차이(差異)가 있다. 2. 수피(樹皮)의 전건비중(全乾比重)이 목질부(木質部) 비중(比重)보다 높은 사실(事實)은 수피내(樹皮內)의 사부섬유(篩部纖維) 및 보강세포(保强細胞)가 많이 있다는 해부적(解剖的)인 구조적(構造的) 특징(特徵)에 기인(基因)한다. 3. 전건비중(全乾比重)에 있어서 잣나무를 제외하고는 내피비중(內皮比重)이 외피비중(外皮比重)보다 높았으며 이는 내피(內皮)보다 높은 수축율(收縮率)에 기인(基因)한다. 4. 수피내(樹皮內)의 해부적(解剖的) 구조(構造)에 있어서 사요소(篩要素)의 구성비율(構成比率)이 높을수록 함수율(含水率)은 높아지고 후막조직(厚膜組織)과 주피조직(周皮組織)이 많으면 많을수록 함수율(含水率)은 떨어진다. 5. 수피(樹皮)의 섬유포화점(纖維飽和點)을 습윤열측정(濕潤熱測定)에 의(依)하여 구(求)할 수 있는 가능성(可能性)을 제시(提示)하였으며 그 결과(結果) 소나무에서는 26~28%사이에 상수리나무에서는 24~28%사이에 있는 것으로 나타났으나 이에 대(對)한 것은 금후연구(今後硏究)에 의(依)하여 더 밝혀져야 할 것이다. 6. 수피(樹皮)의 수축율(收縮率)은 목질부(木質部)와는 달리 경단방향(經斷方向)에서 제일 높고 수축방향(樹縮方向)에서 제일 낮았으나 졸참나무와 굴참나무에서는 열외(列外)이었다. 7. 수피(樹皮)의 비열(比熱)은 목질부(木質部)와 같고 습윤열(濕潤熱)은 목질부(木質部)보다 다소 높았다. 열전도도(熱傳導度)는 목재(木材)보다 낮으며 전건수피비중(全乾樹皮比重)과 수증기비중(水蒸氣比重)을 알고 열전도도(熱傳導度)를 계산할 수 있는 다음과 같은 회귀방정식(回歸方程式)을 유도(誘導)하였고 이 방정식(方程式)에 의(依)하여 얻어진 열전도도(熱傳導度) 수치는$(0.8{\sim}1.6){\times}10^{-4}cal/cm{\cdot}sec{\cdot}deg$이었다. $$K=4.631+11.408{\rho}d+7.628{\rho}m$$ 8. 수피(樹皮)의 열확산(熱擴散)은 $(8.03{\sim}4.46){\times}10^{-4}cm^2/sec$이며 시차열분석(示差熱分析)의 결과(結果)에 의(依)하면 발열량(發熱量)은 발열반응(發熱反應)이 시작(始作)되기 전(前)까지는 목질부(木質部)가 높고 발열반응(發熱反應)이 시작(始作)되면서부터는 수피(樹皮)가 목질부(木質部)보다 상회(上廻)하였다. 9. 경단방향(經斷方向)의 수피곡강도(樹皮曲强度)는 수피비중(樹皮比重)에 비례(比例)하고 회귀식(回歸式)은 M=243.78x-12.02(F=31.41)이었고 압축강도(壓縮强度)는 목질부(木質部)와는 달리 경단방향(經斷方向)이 가장 높고, 경단방향(經斷方向), 수축방향순(樹軸方向順)으로 적어졌다.

  • PDF

당귀잎 착즙액을 이용하여 제조한 식빵의 물리적 특성 (Physical Properties of Pan Bread Made with Various Amounts of Squeezed Danggui Leaf (Angelica acutiloba Kitagawa) Juice)

  • 김원모;오석태;송미란;김기혁;이규희
    • 한국식품영양과학회지
    • /
    • 제46권8호
    • /
    • pp.971-978
    • /
    • 2017
  • 본 연구에서는 한약재 원료로 사용되는 당귀에서 뿌리를 수확한 후 부산물인 당귀잎을 활용하는 범위를 넓히고자 당귀잎을 착즙액 형태로 첨가량을 달리하여 제빵 하고, 식빵의 물성을 분석하여 제빵 가능한 당귀잎 착즙액 첨가량 범위를 확인하고자 하였다. 결과에서 발효팽창력은 우리밀을 이용하여 제조한 빵(DOWF)과 1% 당귀잎 착즙액 고형분을 첨가하여 제조한 빵(1% SDLJ) 사이에 통계적 유의차가 없었으나 당귀잎 착즙액의 함량이 증가할수록 부피 팽창력은 낮아지는 것을 볼 수 있었다. 수분함량은 당귀잎 착즙액 첨가량이 많을수록 줄어드는 경향을 나타내었으며 저장 기간에는 모든 처리구에서 통계적으로 유의차를 나타내며 감소하는 경향을 나타내었다. 색도는 당귀잎 착즙액의 첨가량이 많을수록 L값은 낮아지는 경향을 나타내었고, a값은 음의 값을 나타내었으며 b값은 증가하는 경향을 나타내었다. 저장 기간에 따라서 L값은 낮아지는 경향을 나타내었고 a값은 음의 값을 나타내었으며, b값의 변화는 유의적 차이가 없었다. 탄력성은 당귀잎 착즙액의 첨가량이 증가할수록 감소하는 경향을 나타내었으며 저장 기간에는 감소하였다. 응집성은 수입밀로 제조한 빵(IMWF)이 DOWF보다 높은 값을 나타내었으며, 저장 기간에 급격히 감소하였다. 검성, 깨짐성 및 경도는 당귀잎 착즙액의 첨가량이 증가할수록 높아지는 경향을 나타내었으나 IMWF, DOWF와 1% SDLJ 사이에서 통계적 유의차는 없었다. 제빵 직후 물성 분석 결과 IMWF, DOWF와 1% SDLJ 사이에 유의차가 없어 당귀잎 착즙액을 이용하여 제빵 할 때는 1% SDLJ로 하는 것이 좋을 것으로 판단되었다. 식빵의 저장 기간과 물리적 특성 사이의 상관성을 주성분 분석(principal component analysis, PCA)하였을 때 PC1에 대한 variance proportion은 0.87이었고 PC2에 대한 variance proportion은 0.10이었다. PCA 분석 결과 1% SDLJ는 제빵 후 및 저장 3일째에도 DOWF나 IMWF와 같은 대조구와 제빵 후 특성 및 저장성이 유사한 것을 알 수 있었다. 결론적으로 당귀잎 착즙액으로 제빵 할 경우에는 1% SDLJ로 제빵 하는 것이 바람직할 것으로 판단된다. 당귀잎 착즙액을 이용하였을 때 제빵 가능성이 확인되었으므로 앞으로 기호성에 대한 연구가 더 진행되어야 할 것으로 판단된다.

스타이렌 폭로 근로자의 환경중 폭로농도와 생물학적 모니터링에 관한 연구 (Relationship between Environmental Exposure and Biological Monitoring Values in Workers Exposed to Styrene)

  • 백종민;이종영;김정만
    • 한국산업보건학회지
    • /
    • 제7권2호
    • /
    • pp.161-170
    • /
    • 1997
  • 본 연구는 사업장 근로자의 스타이렌 폭로수준과 이에 따른 biological monitoring 농도의 변화를 알기 위하여 시도되었다. 조사대상자는 FRP공장, 함침작업공장, 피막도포작업공장에 종사하는 남자근로자 64명과 여자근로자 44명이며 포집 및 분석기간은 1995년 6월 15일부터 9월 30일까지 였다. 일반적 특성중 연령, 성별, 근무경력, 음주량, 흡연량은 설문지를 이용하였고 신장과 체중은 개인건강기록표를, 스타이렌 환경폭로농도를 알기 위하여는 확산형 포집기를 사용하였으며, 생물학적 감시물질의 폭로수준을 알기 위하여 혈액과 소변을 채취하여 혈중 스타이렌, 요중 mandelic acid(MA)와 phenylglyoxylic acid(PGA)을 분석하였다. 평균폭로농도는 21.0ppm으로 저농도였으며 사업장별로는 선박관련업체가, 작업방법으로는 적층작업이, 작업형태는 주작업에서 가장 높은 폭로를 보였으며 대상자 중 11%가 허용기준 이상으로 폭로되었다. 환경폭로수준과 혈중 스타이렌의 상관성은 0.620이었고 creatinine으로 보정한 phenylglyoxylic acid와는 0.702로 가장 높은 상관성을 보였다. 혈중 스타이렌과 요중 대사산물의 상관관계는 MA+PGA에서 가장 높은 상관성을 보였다. 생물학적 대사산물의 변화를 설명하는 독립변수들 중 환경폭로농도가 가장 중요하였으며 특히 MA와 MA+PGA에서는 성별 역시 중요한 변수였다. 생물학적 대사산물에 대한 독립변수의 설명력은 모두 31% 이상이었으며 그중 혈중 스타이렌은 49.1%로 가장 높았다. 요중 대사산물을 보정여부에 따른 상관성을 본 결과 모두 0.95이상을 보였다. 이상을 종합한 바 스타이렌 취급작업장의 공기중 농도를 측정할 때 확산포집기로도 사용할 수 있으며, 요의 생물학적 지표에서는 비중으로 보정한 경우가 creatinine으로 보정한 것의 대안으로 사용할 수 있고 또한 요중 MA 및 PGA를 이용하여 폭로 근로자의 폭로농도를 예측할 수 있으므로 이를 스타이렌 취급근로자에 적극적인 활용이 필요한 것으로 제시할 수 있다.

  • PDF

곶감 열수추출물을 첨가한 식빵의 품질특성 (Quality Characteristics of Bread with Dried Persimmons Hot-Water Extracts)

  • 문혜경;한진희;김준한;김귀영;강우원;김종국
    • 한국식품영양과학회지
    • /
    • 제33권4호
    • /
    • pp.723-729
    • /
    • 2004
  • 곶감의 식품에의 이용성 증대를 위하여 곶감 열수추출물을 제조한 후 밀가루에 대하여 10, 20, 30, 40%로 첨가하여 제조한 식빵의 품질특성을 조사하였다. 곶감 열수추출물의 수분함량은 70.37%, 조단백질은 1.72%, 조지방은 0.18%, 조회분은 1.99%, 조섬유는 4.37% 수준이었다. 곶감식빵의 수분함량은 무첨가군이 41.12%이었고, 첨가군의 경우는 42.31%에서 47.20% 수준으로 무첨가군에 비하여 다소 높았고, 수분활성도는 무첨가군이 0.495로 첨가군의 0.499에서 0.523 수준보다 낮은 값을 나타내었다. 또한, 곶감 열수추출물의 첨가량이 증가함에 따라 부피는 감소하였고, 중량과 수분결합력은 증가하는 경향을 보였다. 내부색도는 L값의 경우 첨가군이 무첨가군보다 낮은 값을 보여 명도가 낮아지는 경향이었고, 적색도 a값과 황색도 b값은 곶감 열수추출물의 첨가량이 증가할수록 상대적으로 높은 값을 나타내었다. 곶감식 빵의 조직감은 굳기의 경우는 곶감 열수추출물 40%첨가군이 무첨가군보다 약 3배 이상의 높은 값을 나타내었고, 또한 검성 및 씹힘성도 증가하였다. 접착성과 부숴짐성은 곶감 열수추출물의 첨가량이 증가함에 따라 감소하는 경향이었다. 곶감식빵의 관능평가에서는 곶감 열수추출물 30%첨가군이 색, 단맛 및 전체적인 기호도에서 가장 높은 관능점수를 얻었고, 조직감에서는 곶감 역수추출물 20%첨가군이 가장 높은 관능적 평가를 받았다. 이러한 결과를 종합해 볼 때 식빵의 제조에 있어 곶감 열수추출물 첨가량은 30%내외의 수준으로 첨가함으로써 곶감 특유의 색과 맛을 가지는 곶감식 빵을 제조할 수 있을 것으로 판단된다.iency를 측정하였다. 분리된 침전층에 혈장을 섞어(5 ml) 실험동물에 정맥주사한 후, 전신 헤파린 처치 상태에서(1 mg/kg) 하행대동맥을 차단하여 우회도관 쪽으로 2시간 동안 혈액을 순환시키고 분리하였다. 각 도관의 내강을 생리식염수 500 ml로 동시에 세척한 다음, 일정 간격으로10$\times$10 mm 크기의 절편을 5개 채취하였다. 절편을 세분하여 측정튜브에 담아 동위원소 측정기(gamma counter, Cobra II , Packard ,USA)를 이용하여 Tc-99m-HMPAO의 분당 count수를 측정함으로써 혈소판의 흡착정도를 정량분석 비교하였다. 결과: 동위원소 측정기를 이용한 평균 count수는 각각의 실험군과 대조군의 비율을 이용하여 비교하였다. 평균 count수는 대조군에서 537.3 Ci/min였고 실험군에서는 311.1Ci/min로 측정되었으며, 두 군 사이의 비율은 대조군에 비하여 실험군이 1: 0.58로 통계적으로 유의하였다.(p=0.004) 결론: 위결과를 통하여 실험군이 대조군에 비하여 혈소판 표면흡착측면에서 우수하다는 것을 정량적으로 증명할 수 있었다. 저자 등이 사용한 in-vivo 동위원소 측정법으로 혈소판 흡착정도의 생체 내 실험으로 유용하며 의료용 고분자 재료의 혈액적합성 판정의 지표로 제시하고자 한다.vs. 실험군(595.5$\pm$179.6) 과 심근 수분 함유량 [n=8, p>0.05, 대조군(87.2$\pm$5.5%) vs. 실험군(82.4$\pm$10.1)] 은 두 군간에 유의한 차이가 없었다. 결론: 이상의

특용자원식물(特用資源植物)의 연구(硏究) - 한국임학회지에 게재된 논문을 중심으로 - (A Study on Researches of Resource-plants for Special Use or Purpose - Based on the Articles Published in the Journal of Korean Forestry -)

  • 이재선;김철우;배찬호;송재모;강효진;황석인;문흥규
    • Journal of Forest and Environmental Science
    • /
    • 제19권1호
    • /
    • pp.85-98
    • /
    • 2003
  • 한국임학회지 (1962년의 1호~2002년의 91권 6호)에 게재된 특용자원식물 관련 논문에서 식 음용식물, 약용식물, 사료식물, 조경식물, 섬유식물, 산업용식물 및 밀원식물로 분류하고 그 내용에 따라 입지환경, 생태, 생리, 번식, 조림(또는 무육, 재배), 유전 육종, 분류(또는 식별), 병 충해와 방제, 동물피해와 방제, 성분분석, 식생정보, 생물공학, 경영 경제 빛 총설로 나누었다. 총 1,434편의 발표 논문 중 유용식물자원을 대상으로 한 논문은 27.6%를 차지하는 396편이었고, 내용은 식생정보 60편(15.2%), 생리 56편(14.1%), 유전 육종 56편(14.1%), 번식 53편(13.4%) 및 생태 37편(9.3%)이었다. 조림(무육 재배)은 11편(2.8%) 으로 특용자원식물의 규모경영이 이루어지지 않고 있음을 시사하고 있으며, 이것은 경영 경제 분야가 6편(1.5%)인 것과 맥을 같이 하고 있었다. 연구대상 식물은 잣나무(42편), 아까시나무(23편), 밤나무(14편) 및 은행나무(14편) 순으로 높았고, 이 식물들과 관련한 연구내용은 번식, 생리, 유전 육종, 생태 및 병 충해 순이었다. 연구의 목적, 내용, 결과 및 대상식물 등을 고려하여 보면, 1) 초본식물에 대한 보다 많은 연구, 2) 타산업 또는 학분 분야와의 공동연구, 3) 자원 보전적 연구 및 4) 연구주체자 간의 연구결과의 공유 등이 매우 요망된다.

  • PDF

Silago 품질에 영향을 미치는 각종요인의 평가 (The Evvalution of Different Factors Influencing the Quality of Silage)

  • 한정대;윤익석
    • 한국초지조사료학회지
    • /
    • 제1권1호
    • /
    • pp.18-28
    • /
    • 1978
  • 재료(材料)의 수확시기(收穫時期)와 여건(予乾), 세절(細切) 등(等)의 물리적(物理的)인 처리(處理)가 싸이레지품질(品質)에 미치는 영향(影響)을 구명(究明)하기 위해 Italian ryegrass(Lolium multi florum)는 출수전(出穗前) I)과 출수기(出穗期) II), 섬다비(Dystaenia takesimana NaKai)는 개화전(開花前) III)에 각각(各各) 예취(刈取)하여 무처리(無處理) A) 1일(日) 여건(予乾) B), $1{\sim}2cm$ 세절(細切) C), 세절후(細切後) 여건(予乾) D)의 4가지 조제방법(調製方法)으로 $1,727cm^3$의 프라스틱 원통 싸이로를 사용(使用)하여 싸이레지 조제후(調製後) 실온(室溫)에서 약(約) 3개월(個月) 저장(貯藏)한 후케 동시(同時)에 개봉(開封)하여 조사(調査)한 바 그 결과(結果)는 다음과 같다. 1. 섬바디는 조섬유함량(粗纖維含量)이 낮고 N.F.E/CP 비율(比率)이 6.31로 Italian ryegrass보다 싸이레지에 적합(適合)한 일반성분(一般成分)을 함유(含有)하고 있었다. 2. 무처리(無處理) 및 세절시(細切時) 일반성분(一般成分) 중(中) N.F.E 손실(損失)이 가장 많았고 여건시(予乾時)는 적었다. 3. 세절(細切), 여건(予乾)은 건물소화율(乾物消化率)을 개선(改善)시켰다. 4. 동일용적내(同一容積內)에 건물충전량(乾物充塡量)은 Italian ryegrass 출수전(出穗前)에 비(比)해 출수기(出穗期) 및 섬바디가 각각(各各) 8%, 69% 증가(增加)되었고, 여건(予乾) 또는 세절시(細切時) 무처리(無處理)보다 각각(各各) $41%{\sim}134%$ 증가(增加)되었다. 5. 저장중(貯藏中) 중량손실(重量損失)은 대부분(大部分)이 첫 주(週)에 발생(發生)되었고 손실(損失)은 4주(週)까지 서서히 계속되었다. 8주(週)까지의 최고손실(最高損失)은 무처리(無處理)의 3.76%였다. 6. 1일(日) 여건(予乾)으로 건물함량(乾物含量)은 $23%{\sim}131%$ 증가(增加) 시켰다. 여건(予乾), 세절(細切)은 pH, 유산함량(乳酸含量)은 유의(有意)하게 증가(增加)시켰으나 반대로 초산(醋酸), 낙산(酪酸) $NH_3-N$ 함량(含量) 유의(有意)하게 감소(減少)시키고 품질개선(品質改善)에 현저(顯著)한 결과(結果)가 인정(認定)되었다. 7. $NH_3-N$과 낙산(酪酸), 유산(乳酸)과 건물함량(乾物含量) 간(間)에는 각각(各各) r=0.782**, r=0.634**의 상관(相關)이 있었으며 회귀방정식(回歸方程式)은 각각(各各) y=12.853X+4.908(X=낙산함량(酪酸含量)), y=0.061X+1.309(X=건물함량(乾物含量))이었다. 8. 이상(以上)의 결과(結果) 양질(良質) 싸이레지 조제(調製)를 위(爲)해서 Italian ryegrass는 여건(予乾) 또는 세절(細切)이 반드시 필요(必要)하며, 섬바디는 여건(予乾), 세절(細切)이 품질개선(品質改善)에 유효(有效)하였다.

  • PDF

천마총 출토 철부(鐵釜)의 제작기법 및 보존처리 (Study on the Manufacturing techniques & Conservation of Iron Pot from Cheonmachong Ancient Tomb)

  • 이승렬;신용비;정원섭
    • 보존과학회지
    • /
    • 제30권3호
    • /
    • pp.263-275
    • /
    • 2014
  • 천마총(황남동 제 155호 고분)에서 출토된 철부(鐵釜)의 제작기법 및 보존처리에 대하여 연구하고자 하였다. 철부의 제작기법을 조사하기 위하여 유물 중 일부를 채취하여 마운팅 후 연마하고, etching을 실시하여 금속조직을 관찰하였고, 비금속개재물부분은 SEM-EDS로 분석을 실시하였다. 금속학적 조직검사와 SEM-EDS분석 결과 철 솥은 백주철 조직이 관찰되었고, 주조 후 상온에서 서서히 건조시킨 것으로 보이며, 취성을 개선하기 위해 별다른 열처리를 시도한 흔적은 보이지 않는다. 몸통 중심부의 폭3cm 두께 1.5cm 전이 확인됨에 따라서 가로식 거푸집을 활용한 이분제작기법을 사용하여 주조한 것으로 추정된다. 이처럼 백주철 조직과 가로식 거푸집을 활용한 제작기법은 비슷한 시기인 식리총과 황남대총에서 출토 된 철 솥에서도 나타나는 것으로, 당시 주조품의 생산기술이 동일하였음을 알 수 있었다. 보존처리는 크게 처리전조사, 이물질제거, 탈염처리, 강화처리, 접합 복원, 색맞춤의 순서로 진행하였으며, 처리과정 중 필요에 따라 세척 및 건조를 실시하였다. 강화처리는 유물의 크기로 인하여 진공함침에 어려움이 있었으므로, 저농도의 Paraloid NAD-10을 2-3차례 붓으로 도포하였고, 보존처리가 완료된 후 15wt.% Paraloid NAD-10용액으로 표면을 재강화하였다. 파손부위의 복원은 섬유강화플라스틱 수지(POLYCOAT FH-245,몰드 적층용)를 사용하여 파손 부위와 유사한 형태의 모형을 만든 후 접합하여 복원하였다. 이번 연구를 통하여 철제유물의 보존처리뿐만 아니라 5-6세기 주조 철솥의 제작기법에 대한 자료를 축적함으로 향후 보다 나은 연구를 위한 발판으로 활용되었으면 한다.

압출성형 공정변수에 따른 율피분말 첨가 반죽의 물성과 식빵의 품질특성 (Quality Characteristics of Dough and Bread Added With Extruded Chestnut Shell Powder Under Various Conditions)

  • 이정숙;윤성준;류기형
    • 산업식품공학
    • /
    • 제21권4호
    • /
    • pp.351-359
    • /
    • 2017
  • 본 연구는 율피분말을 제빵에 효과적으로 활용하기 위한 방안으로 율피분말 및 압출성형 공정변수를 달리한 율피분말 6%를 첨가하여 반죽의 물성과 식빵의 품질특성을 조사하였다. 율피의 압출성형 공정변수는 수분함량 25%와 30%, 용융물 온도는 110, 130, $150^{\circ}C$로 조절하였다. 총 식이섬유 함량은 압출성형 율피분말에서 약간 증가하였으며, 총 폴리페놀 함량은 율피분말이 869.09 mg인데 비하여 수분함량 25%, 용융물 온도 $150^{\circ}C$에서 1,397.17 mg까지 증가하였다. 패리노그램에서, 반죽의 흡수율은 대조군과 율피분말에 비해 압출성형 공정변수 수분함량 25%와 수분함량 30%의 실험군에서 유의적인 증가를 보였다(p<0.05). 2시간 및 3시간 이후의 발효팽창력은 수분함량 25%의 용융물 온도 $150^{\circ}C$와 수분함량 30%의 용융물 온도 $150^{\circ}C$에서 대조군과 비슷한 경향을 나타내었다. 비용적은 대조군이 $3.74{\pm}0.08cc/g$으로 가장 높았으며, 율피분말에 비하여 압출성형율피분말 실험군이 높게 관측되었다(p<0.05). 1일 경과 후의 경도는 수분함량 25%의 용융물 온도 $150^{\circ}C$에서 $113.33{\pm}6.17g$으로 대조군의 $107.42{\pm}14.52g$과 비슷하였다. 이상의 결과로 수분함량 25%의 용융물 온도 $150^{\circ}C$ 및 수분함량 30%의 용융물 온도 $130^{\circ}C$에서 반죽의 물성과 식빵의 품질특성이 전반적으로 향상된 것을 알 수 있었다. 이는 부재료의 첨가에도 불구하고 압출성형 율피분말 전분의 호화 및 식이섬유소의 수분흡수력이 반죽의 물성과 식빵의 품질특성에 영향을 준 것으로 보인다.

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF