• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.321-327
• /
• 2019

Spectral Beam Combining (SBC) is used for a high-power fiber laser in order to overcome the power limitation of single fiber laser. In SBC, several laser bwams with different wavelengths are combined to obtain a single-aperture beam by diffraction grating. The combining efficiency is dependent on a linewidth, beam quality and specific wavelength of each beam among others. In this paper, we consider the method of a wavelength monitoring and a feedback control of laser diodes used as seeds of laser beams to obtain optimum combining conditions. In order to measure the wavelengths of multi-beam, we use the high resolution camera and diffraction grating with 1,800l/mm. The experiment results show the possibility of feedback control of a current and temperature of multi-seed laser diodes to obtain optimum wavelengths for SBC.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.131-138
• /
• 2011

We fabricated distributed feedback InGaAsP/InP laser diodes for optical fiber communication module and characterized the lasing properties in continuous wave operation. The active layer of 7-period InGaAsP(1.127 eV)/InGaAsP(0.954 eV) multi-quantum well structure was grown by the metal-organic chemical vapor deposition. The grating for waveguide was also fabricated by the implementation of the Mach-Zehender holographic method of two laser beams interference of He- Cd laser and the fabricated laser diode has the dimension of the laser length of $400{\mu}m$ and the ridge width of $1.2{\mu}m$. The laser diode shows the threshold current of 3.59 mA, the threshold voltage of 1.059 V. For the room-temperature operation with the current of 13.54 mA and the voltage of 1.12 V, the peak wavelength is about 1309.70 nm and optical power is 13.254 mW.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.218-222
• /
• 2020

In this paper, we have experimentally demonstrated a 2-kW-class spectrally-beam-combined laser with high beam quality, using narrow-linewidth ytterbium-doped polarization-maintaining fiber amplifiers. Five fiber amplifiers with different center wavelengths were implemented for the spectrally-beam-combined laser. The center wavelengths of the five amplifiers were 1062, 1063, 1064, 1065, and 1066 nm, respectively. A phase-modulated laser diode was used as a seed source for each amplifier. The seed sources were modulated by filtered pseudorandom-bit-sequence (PRBS) signals 5 GHz in linewidth. The polarization-maintaining large-mode-area fiber with a core size of 30 ㎛ was used as a delivery fiber to mitigate the stimulated Brillouin scattering (SBS) effect. The laser beams from five amplifiers were spectrally combined by a multilayer dielectric diffraction grating. The maximum output power and beam quality M² of the combined laser were measured to be 2.3 kW and 1.74, respectively.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.876-879
• /
• 2004

The buried fiber optic cable as a distributed intrusion sensor for detecting and locating intruders along the long perimeters is proposed. Phase changes resulting from either the pressure of the intruder on the ground immediately above the buried fiber or from seismic disturbances in the vicinity are sensed by a phase-sensitive optical time-domain reflectometer. Light pulses from a Er:fiber cw laser with a narrow, <3kHz-range, spectral width and a frequency drift of < 1 MHz/min are injected into one end of the fiber, and the backscattered light from the fiber is monitored with a photodetector. Results of preliminary studies, measurement of phase changes produced by pressure and seismic disturbances in buried fiber optic cables and simulation of ${\varphi}-OTDR$ response over long fiber paths, to establish the feasibility of the concept are described. The field experiments indicate adequate phase changes, more than 1t-rad, are produced by intruders on foot and vehicle for burial depths in the 0.2 m to 1 m range in sand, clay and fine gravel soils. The simulations predict a range of 10 km with 35 m range resolution and 30 km with 90 m range resolution. This technology could in a cost-effective manner provide enhanced perimeter security.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.58-63
• /
• 1999

A 10 GHz harmonically mode-locked semiconductor-fiber ring laser was implemented using a semiconductor optical amplifier at $1.5\mu\textrm{m}$ The laser pulse has 13~18 ps pulse duration, 0.4~0.6 nm spectral width and was positively chirped. The output pulse with an average power of 4 dBm was compressed to 6.8 ps using 2 km long standard single mode optical fiber.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.83-88
• /
• 1997

We present a fiber laser sensor that uses a fiber grating as a strain sensor head and an end-reflector of the laser cavity. A passive wavelength. The long-period grating band-rejection filter showed a wide usable filter wavelength range of about 25 nm, and the intensity of transmitted light increased by 16% for 1nm sensor wavelength shift in trhe measurement range.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.102-103
• /
• 2000

최근 광통신 시스템에서는 파장분할다중화(WDM) 방식의 도입으로 인해, 한 개의 레이저 신호를 입사시켜 여러 개의 레이저 신호를 발생시켜 광원으로 사용하는 연구가 활발히 진행되어 왔다. Park et al.[1]은 Erbium Doped Fiber Laser(EDFL)에서 1.1nm 파장간격으로 24라인을 얻었고, Yamashita et al.[2]은 내부 에탈론 구조를 가진 EDFL에서 0.8nm 간격으로 17라인, D.Yu et al.[3]은 반사형 거울과 Circulator를 사용한 Brillouin/Erbium Fiber Laser(BEFL)에서 0.08nm 간격으로 30라인, G.J.Cowle et al.[4]은 Injection-Seed Locking을 이용한 BEFL.에서 0.09nm 간격으로 12라인 그리고 N.S.Kim et al.[5]은 내부 되먹임을 이용한 BEFL에서 0.09nm 간격으로 4라인을 각각 발생시켰다. 여기서 중요한 요소로는 발생된 레이저 신호의 안정성, 각 신호들 간의 파장간격, 레이저 신호의 수 그리고 Peak Intensity 간의 차이 등이 있는데 각 연구방식에 따라 다양한 결과를 보여준다. 본 실험에서는 향상된 되먹임 구조를 가진 BEFL에서 다파장 발생에 관한 연구를 하였다. (중략)

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2207-2208
• /
• 1999

In this paper, we would like to study the oscillation characteristics of single mode fiber laser which is composed of a Fabry-Perot resonator, a pump source of 808nm Laser Diode, a $Er^{3+}$ doped single mode fiber with 0.5um diameter.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.480-486
• /
• 1993

We propose and demanstrate a fiber laser as a sensor, whose output is the frequency of beat signals between eigenpolarization modes of the fiber laser. For the measurement of lateral stress, proportional constant of 4.8 kHz/gram is obtained with a good linearity. For the measurements of temperature and longitudinal strain applied to the polarization maintaining fiber laser, proportional constants of 30 kHz/$^{\circ}C$ -cm, and 43 kHz/${\mu}m$, respectively, are obtained.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.485-494
• /
• 2014

A novel antenna with ellipsoid-paraboloid surfaces configuration is designed for matching the incident radial radiation fiber laser distribution for maximum transmission efficiency. The on-axial and off-axial defocus effects on the optical antenna system, resulting in energy loss, are analyzed in detail. Knowledge of the effects of those defocuses on beam divergence, aberration and antenna transmission efficiency is of great importance to the long range communication systems.