• Membrane and Water Treatment
• /
• 제4권3호
• /
• pp.157-174
• /
• 2013

The present study is devoted to the validation of a new method for in line electrokinetic characterisation of deposits on membrane surfaces. This method is based upon simultaneous measurements of transversal streaming potential and permeates flux at constant pressure before and during the deposit formation. Dead-end filtration experiments were conducted with negative flat membranes forming a narrow slit channel, negative hollow fiber membranes and mono-dispersed suspensions of (negatively charged) polystyrene latex and (positively charged) melamine particles at various concentrations. It was observed that the overall streaming potential coefficient increased in absolute value with the deposited latex quantity, whereas it decreased and changed of sign during the filtration of melamine suspensions. By considering a resistance-in-series model, the streaming potential coefficient of the single deposit ($SP_d$) was deduced from the electrokinetic and hydraulic measurements. The independence of $SP_d$ with respect to growth kinetics validates the measurement method and the reliability of the proposed procedure for calculating $SP_d$. It was found that $SP_d$ levelled off much more quickly when filtration was performed through the slit channel. This different behaviour could result from a non-uniform distribution of the deposit thickness along the membrane given that the position of measuring electrodes is different between the two cells.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.822-829
• /
• 2017

하수처리장에서의 총 인 저감을 위한 방안으로 완속교반/침전 섬유여과시스템을 적용하여 하수 방류수와 반류수를 제어하는 방법에 대해 비교 검토하였다. 물질수지를 통해 인의 최종 농도를 강화된 기준치인 0.2 mg/L로 낮추기 위해서는 약 92.4 kg T-P/day를 제거해야 되는 것으로 분석되었으며, 이를 위한 총 인 제거효율은 하수 방류수는 96%, 반류수(탈수여액)은 69.2% 이상이 되어야 한다. 총 인 제거 목표치를 달성하기 위한 시스템 운영비용을 검토하였으며, 하수방류수를 처리하는 것보다 유량은 적으나 고농도의 인을 함유한 반류수를 처리하는 것이 약품비용은 약 1/2.4, 전력비용은 약 1/120 정도로 절감되는 것으로 나타났다. 한편 반류수 처리를 위해 개발시스템인 완속교반/침전 섬유여과시스템과 일반적인 응집침전시스템을 적용하는 경우에 대한 경제성을 검토하였으며, 완속교반/침전 섬유여과시스템이 일반적인 응집침전시스템에 비해 설치면적이 약 1/7로 작고 약품소요량 및 전력비를 포함한 연간운전비용은 약 1/1.7 소요되어 개발시스템이 보다 경제성이 있는 것으로 평가되었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.54.1-54
• /
• 2002

• 한국재료학회지
• /
• 제34권1호
• /
• pp.12-20
• /
• 2024

This study successfully prepared high-porosity aluminosilicate fibrous porous ceramics through vacuum suction filtration using aluminosilicate fiber as the primary raw material and glass powder as binder, with the appropriate incorporation of glass fiber. The effects of the composition of raw materials and sintering process on the structure and properties of the material were studied. The results show that when the content of glass powder reached 20 wt% and the samples were sintered at the temperature of 1,000 ℃, strong bonds were formed between the binder phase and fibers, resulting in a compressive strength of 0.63 MPa. When the sintering temperatures were increased from 1,000 ℃ to 1,200, the open porosity of the samples decreased from 89.08 % to 82.38 %, while the linear shrinkage increased from 1.13 % to 10.17 %. Meanwhile, during the sintering process, a large amount of cristobalite and mullite were precipitated from the aluminosilicate fibers, which reduced the performance of the aluminosilicate fibers and hindered the comprehensive improvement in sample performance. Based on these conditions, after adding 30 wt% glass fiber and being sintered at 1,000 ℃, the sample exhibited higher compressive strength (1.34 MPa), higher open porosity (89.13 %), and lower linear shrinkage (5.26 %). The aluminosilicate fibrous porous ceramic samples exhibited excellent permeability performance due to their high porosity and interconnected three-dimensional pore structures. When the samples were filtered at a flow rate of 150 mL/min, the measured pressure drop and permeability were 0.56 KPa and 0.77 × 10^-6 m² respectively.

• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.989-994
• /
• 1995

Rigid porous carbon fiber composites with the uniform pore size distribution were prepared by vacuum forming from water slurries containing carbonized PAN fibers, a phenolic resin and ceramic binders. The composites were designed to use for highly efficient carbon fiber filters for particulate filtration and gas adsorption. As the as-received carbon fibers of 1mm in length were milled to an approximate average length of 300${\mu}{\textrm}{m}$, modulus of rupture (MOR) of the composite filter was increased from 1MPa to the value larger than 5 MPa. Modulus of rupture (MOR) for the composite filter fabricated using the milled carbon fiber was increased from 5 MPa to 10 MPa as the carbonization temperature of the PAN fiber was raised from 90$0^{\circ}C$ to 140$0^{\circ}C$. The air permeability and an average pore size of the composite filter were increased from 40 to 270cc/min.$\textrm{cm}^2$ and from 35 to 80${\mu}{\textrm}{m}$, respectively, as the apparent porosity increased from 80 to 95%. It was shown that the MOR of the carbon fiber composite filter was dependent primarily on the average length of carbon fiber, carbonization temperature and the type of bonding materials.

• KSBB Journal
• /
• 제4권1호
• /
• pp.57-61
• /
• 1989

발효액에서 hollow fiber membrane에 의한 Pichia sti-pitis의 분리 공정의 가능성을 검토해 보았다. Permeateflux는 cell의 농도, pH, antifoam agent의 농도, 여과 압력, 그리고 recircultion rate에 의해 영향을 받았으며 온도는 flux의 감소와 별로 관계가 없는 것으로 나타났다. 아울러 microcomputer에 조절되어 membrane을 backflush하는 것이 memnrane의 fouling 문제를 경감 시켜서 발효액에서 P. stipitis를 분리하는 공저의 연장된 조업을 가능케 함을 확인 하였다.

• Korean Chemical Engineering Research
• /
• 제62권1호
• /
• pp.87-98
• /
• 2024

본 연구는 리그노셀룰로오스 섬유와 굴참나무 수피-기반 활성탄(COA)으로 제조한 3층 섬유판에 한지를 조합하여 제작한 섬유판 필터세트의 미세먼지(PM), 휘발성 유기화합물(TVOC), 폼알데하이드(HCHO) 여과능을 조사하기 위하여 수행하였다. 단백질계 접착제를 적용하여 표층에 목섬유 그리고 심층에 재생섬유/COA로 제조한 섬유판(WRF)과 한지로 제작한 섬유판 필터세트는 일반향의 연소에 의하여 발생하는 상기 오염물질을 효과적으로 여과하였다. 섬유판 제조에 있어 표층/심층에 적용되는 접착제의 함지율을 4%/4%, 5%/3%, 6%/2%로 조절하여 WRF를 제조한 후, 이를 한지와 함께 WRF-기반 필터세트 제작에 이용하였다. 이 필터세트의 PM, TVOC, HCHO 여과능은 심층의 함지율이 감소함에 따라 향상되었다. 한편 WRF-기반 필터세트 구성에 있어 45 g/m² 평량의 한지보다 25 g/m² 평량의 한지(KP-25g)를 사용하여 제작한 필터세트에서 여과능이 우수하였다. 표층에 재생섬유와 심층에 목섬유/COA로 제조한 섬유판(RWF)과 KP-25g로 구성한 섬유판 필터세트의 여과능은 WRF와 비교하여 높았다. 소형 실내공간 및 대형 옥외공간에 WRF-기반 섬유판 필터세트 및 무필터 조건과 함께 측정한 PM 및 TVOC 여과능은 RWF-기반 섬유판 필터세트에서 높았다. 따라서 RWF와 KP-25g를 조합하여 제작한 섬유판 필터세트가 실내외 공간에 존재하는 PM, TVOC 여과용 필터로서 적용이 가능할 것으로 생각한다.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1134-1138
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, electrical properties and filtration performance of electrospun filter media are quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. Electrospun filters show same collection efficiency with low pressure drop compare to commercialized HEPA filters. Surface charge potential and surface charge density of electrospun filters are increased with increasing applied voltage. Also collection efficiency of electrospun filters is increased with increasing surface charge potential and surface charge density.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.95-98
• /
• 2006

Filtration by fibrous filter is one of the Principle methods used for removing pollutant particles in the liquid. Because of the increasing need to protect both human health and valuable devices from exposure to fine particles, filtration has become more important. Filters have been developed with modified surface charge characteristics to capture and adsorb particles by electrokinetic interaction between the filter surface and particles contained in water. The main purposes of this study are to develop and evaluate the performance evaluation of the apparatus for making a positively charged porous filter media and to analyze the surface characteristics of the filter media for capturing negavitely charged contaminants mainly bacteria and virus from water. The experimental apparatus consists of a mixing tank, a vacuum pumping system, a injection nozzle, a roller press and a controller. The filter media is composed of glass fiber(50-750 nm), cellulose($10-20{\mu}m$) and colloidal charge modifier. The characteristics of filter media is analyzed by SEM(Scanning Electron Microscopy), AFM(Atomic Force Microscopy) and quantified by measuring the zeta potential values.