• Korean Journal of Environmental Agriculture
• /
• v.33 no.3
• /
• pp.205-212
• /
• 2014

BACKGROUND: This study focused on the contents of flavonoid compounds in vegetables. Generally vegetables have contributed to a healthy diet, arisen from contains a large amount of fiber and functional ingredients. And flavonoid compounds are one of major functional components in the vegetables. currently research of flavonoid contents does not enough, specially in the part of homegrown vegetable. METHODS AND RESULTS: Vegetable samples were purchased in domestic market. Sample extraction by methanol, distilled water, and formic acid based solvent. Also same solvent used for mobile phase in UPLC. Eleven types of flavonoid compounds were analyzed with same kind of external standard and one kind of internal standard (galangin) for quantification. Standard calibration curve presented linearity with the correlation coefficient $R^2$ > 0.98, analysed from 1 to 50 ppm concentration. The quantitative value and multivariate analysis results were derived from the Excel and SIMCA-P11. Overall, onion has largest amount(916.5 mg/100 g) of flavonoid and also other vegetables have has significant amount[Mugwort: 138.8, Galic stem:123.6 mg/100 g etc.] of flavonoid compounds. Edible portion of vegetables per share for simulating by SIMCA-P11, root vegetables has had difference with other vegetables according to distributions and amounts of flavonoid compounds. CONCLUSION: Optionally, the results from this experiment can use to select the material for flavonoid researches. And based on these results, if this experiment will be continuously complemented, and performed, could used in various fields.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.97-109
• /
• 2003

This study was conducted to investigate use possibility on waste water sludges of water disposal plant as raw materials of organic compost at Fertilizer Official Regulation of Fertilizer Management Law in 2002. In heavy metal contents, some water service sludges were discovered a little over than the standard levels of raw material regulated in organic compost and most of them were not reached the levels. But they were difficult for using the raw materials of organic compost owing to shortage of the organic content. It was judged that the fiber and leather sludges were much in the heavy metal contents and they couldn't use as the raw materials of organic compost. There was afraid that a little heavy metal contents of cosmetic sludge were less than the levels, but it was possible to use selectively as a raw material.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2001.11a
• /
• pp.24-39
• /
• 2001

These experiments were conducted to evaluate the nutritional and feeding value of red pepper seed oil meal (RPSOM) as local vegetable protein ingredients for poultry feeding. In the first experiment, nutritional values of RPSOM were evaluated by analyzing chemical compositions and determining true metabolizable energy (TME), nitrogen corrected TME (TMEn) and true available amino acid (TAAA) contents. According to the chemical analysis, RPSOM contained 22.50％ of crude protein, 4.75％ of ether extract, 27.70％ of crude fiber, 0.34 mg／g of capsaicin and 49.97 ppm of xanthophylls. The values of TME and TMEn determined by force-feeding 16 roosters (ISA-Brown) were 1.73 kcal／g and 1.63 kcal／g on dry matter basis, respectively. The average TAAA value of 16 amino acids measured by the force－feeding technique was 81.70％. These values were used for formulating experimental diets containing various levels of RPSOM for broiler chicks and laying hens. Two feeding trials were made to investigate the effects of dietary incorporation of RPSOM into chicken feed performances of broiler chicks and laying hens. In the broiler feeding (Exp. 2), a total of two hundred twenty-five, 4 wk old male broiler chicks (Ross) were randomly divided into 9 groups of 25 birds each and assigned to three experimental diets containing 0, 5 and 10% RPSOM. The birds were fed ad libitum the diets for 3 wk and feed intake, weight gain and feed conversion rate were determined. At the end of the feeding, the blood levels of glutamate oxaloacetate transaminase (GOT), gamma glutamyl transpeptidase (GGT), blood urea nitrogen (BUN) and cholesterol, and the body and fatty acid compositions of leg muscle were measured. No significant differences were observed in weight gain, feed intake, feed conversion rate, body composition, serum levels of GOT, GGT and BUN among the treatments. However, blood cholesterol level was lower (P＜0.05) in 10% RPSOM diet group than those in the other. The dietary RPSOM at 5 and 10% levels increased the content of linoleic acid (P＜0.05) in leg muscle compared to that of control group. The results indicate that RPSOM can be used for broiler feed up to 10% without any significant negative effects on broiler performance. In the layer feeding (Exp. 3), the effects of dietary RPSOM on the performances of laying hen were investigated by feeding ninety 45 wk old laying hens (ISA-Brown) with experimental diets containing 0, 5 and 10% RPSOM for 4 wk (30 birds per treatment). Measurements were made on egg production rate, egg weight, feed intake, Haugh unit, egg shell strength which was higher (P＜0.05) in layers fed 10% RPSOM diet compared to those fed 0 and 5% RPSOM diets. Thus, it can be concluded that RPSOM can be included into laying hen feed up to 10% without any harmful effects.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.91-97
• /
• 2015

Papermakers wish to increase the filler content of printing and writing grades because it allows saving in production cost through fiber replacement and improving the formation, and optical and printing properties of the paper. However, high filler loading in the base paper has negative side effects. It reduces the mechanical properties of paper and induces cracking at the fold after coating process. Fold cracking is one of the most frequent quality complaints for magazines, high quality books, etc. Two approaches were examined as methods to reduce fold cracking. One approach was to use preflocculated fillers, which was expected to reduce the fold cracking because it would decrease the interfiber bonding. The other approach was to use a new coating binder that gives greater binding power and thereby provides an opportunity of reducing the fold cracking of coated paper. When filler preflocculation was employed in producing the base paper, fold cracking becomes more severe than conventional filler loading condition. On the other hand, use of nano sized binder in coating improved the tensile properties of the coating layer and thereby decreased the crack area. It was shown that tensile properties of coating layer played an important role in fold cracking of coating.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.6 no.1
• /
• pp.19-23
• /
• 1986

This experiment was conducted to find out the change of composition and yield of whole crop rye plant by the maturity stage such as boot, heading, milky, dough and yellow ripe. The results of this experiment were as follows: The yield of whole plant was significantly (P<0.01) higher in the dough stage than in the other stages, and stalk yield of whole plant was significantly (P<0.01) higher in the dough stage than in the other stages, and stalk yield of whole plant was the highest in the part of whole plant, ear yield in the yellow ripe stage. Leaf and stalk yield in the ratio of part yield to whole plant yield remarkably decreased according to the passage from boot to yellow ripe stage, but ear yield increased. Dry matter yield increased with advancing maturity stage, and was the highest in the yellow ripe stage (P<0.01). Crude protein contents of whole plant and each parts gradually decreased, and crude fiber content increased with advancing maturity stage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.1
• /
• pp.36-42
• /
• 2015

This study was conducted from 2013 to 2014 to explore the feasibility of the cultivation of warm-season grass as an annual Korean forage crop, while concurrently evaluating the characteristics and forage production of warm-season grass in Korea. The experimental design was a randomized block design (RBD) with three replications. Five bermudagrass [Cynodon dactylon (L.) Pers.] cultivars, two teffgrass (Paspalum notatum Flugge) cultivars, and a Kleingrass [Panicum coloratum L.] cultivar were compared for forage production and quality in the middle region of Korea. After seeding, the numbers of days until seedling emergence for bermudagrass and kleingrass were observed at approximately day 11 and day 12, respectively. The heading dates of teffgrass and kleingrass were on July 12 and July 26, respectively. The dry matter (DM) yield of bermudagrass Tifton 85 was usually greater than the other entries. The crude protein content (CPC) and total digestibility nutrient (TDN) for the teffgrass cultivars were usually greater than the other entries at all study sites. The acid detergent fiber (ADF) and in vitro DM digestibility (IVDMD) were similar across all cultivars.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.2
• /
• pp.131-138
• /
• 2012

This study was conducted to evaluate the characteristics and forage production of bermudagrass (Cynodon dactylon) and bahiagrass (Paspalum notatum) in Jeju. Bermudagrass cultivars evaluated were Common and Ecotype. Bahiagrass cultivars evaluated were Tifton 9 and Argentine. Two warm season grasses were established at the Subtropical Animal Experiment Station in spring 2007. Emergence of bremudagrass and bahiagrass was observed approximately 16 days and 28 days after seeding, respectively. The heading dates of bermudagrass and bahiagrass were on 26 May and in mid-July, respectively. Bermudagrass cultivars had higher dry matter (DM) than bahiagrass at first harvest. Dry matter yield of bahiagrass was higher than that of bermudagrass (p<0.05). Peak forage DM production of bermudagrass and bahiagrass cultivars was in June and July, respectively. The content of crude protein (CP) and total digestibility nutrient (TDN) of bermudagrass cultivars were higher than those of bahiagrass during the first harvest. Acid detergent fiber (ADF) and in vitro DM digestibility (IVDMD) were similar across the four cultivars. In Jeju, bermudagrass and bahiagrass provide a useful option for supplemental summer forage in most livestock forage systems.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.688-696
• /
• 1999

Changes in quality during frozen storage of meat with thermal equalized freezing and various freezing methods were investigated. When beef were frozen at freezing rate of $0.39{\sim}0.66\;cm/h$, average diameter of ice crystal were about $30{\sim}50\;{\mu}m$ and showed broken tissues or irregular cracks. At freezing velocity of $1.14{\sim}2.26\;cm/h$, ice crystals of about $10{\sim}30\;{\mu}m$ was formed mainly inside or between fiber and slight destruction of tissues was occurred. The average diameter (D) of the ice crystals were related to the characteristic freezing time $(t_c)$ by the equation: $D({\mu}m)=4.089+26.88logt_c\;(r^2=0.913)$. Beef with still-air freezing showed higher drip loss than methods of immersion and thermal equalized freezing. Also, drip loss of pork was relatively lower than beef and showed highest value to 7.39% during storage on 40 days at air-blast freezing method. No apparent change of pH during storage of frozen beef and pork by freezing methods were detected. However, least changes for sample with thermal equalized freezing was found compare to sample with still-air and air blast freezing in VBN and TBA value. The fluctuation of frozen storage temperature did not cause noticeable changes on pH and water content. However, drip loss, VBN and TBA values were increased slowly as frequency of fluctuation increased.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.4
• /
• pp.19-25
• /
• 2008

This study was carried out to investigate the bending strength properties of the unreinforced glulam beams and the GFRP laminated glulam beams according to the volume ratio of GFRP. The 7-layer glulam beams ($10cm(b){\times}14cm(h){\times}180cm(l)$) were manufactured, using Larch (Larix kaempferi Carr.) laminae ($2cm(h){\times}10cm(b){\times}360cm(l)$), which were dried to the moisture content of 8% and specific gravity of 0.54. GPRP of 0.1 and 0.3 cm was reinforced between the outmost layer of bottom and next layer. When the glulam beams were reinforced with GFRP at the volume ratio of 0.7% and 2.1%, respectively, the bending strength was increased by 12% and 28%, respectively, in the reinforced beams than in control glulam beams. Also, the GFRP reinforced layer of the glulam beams with GFRP laminations blocked the progression of rupture, and the unbroken part held about 90% of the bending strength. In the results of glue joints test, the block shear strength is higher than $7.1N/mm^2$, the standard of KS F3021, and in the result of delamination, the adhesive strength is good as the water soaking and boiling delamination was less than 5%.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.39-41
• /
• 2011

The recycling rate of recovered paper in Korea is the highest in the world, 92%, but remanufacturing yield is low due to the extremely poor quality of the paper. The poor quality, in turn, influences to the reject amount in deinking process. To increase the yield of old newspaper recycling process, hydrophobic degree of inorganic pigments of deinking stock must be reduced. To determine the hydrophobicity, Pitch Potential Deposit Tester (PDT) was newly designed and applied with respect to the SB latex property of various quality used in Korea; its hydrophobic degree according to Tg, gel content, charge and particle size of latex and optimum designing condition of SB latex. And below are the conclusions: 1. The reason of excessive reject from old newspaper deinking process for total amount of printed ink is loss of inorganic pigments. When lipase, a biochemical catalyst, was applied with the purpose of preventing inorganic pigments loss about more than 70% of total reject weight and promoting hydration of pulp for deinking, deinking process yield of pre flotation secondary stage increased remarkably without any changes of deinking efficiency. 2. Lipase improved deinking stock by cutting ester linkage on surface of hydrophobic materials to promote its hydration. From this, it reached the conclusion that hydration degree of stock exercises significant effect on flotation deinking process yield. 3. Inorganic alkali promotes hydration of deinking stock. But there have been needs for more fundamental measures other than inorganic alkali of promoting hydration for yield improvement. For this, this study intended to find out reasons of chemical properties change on surface of hydrophobic material by change of pH. 4. Pitch Deposit Test (PDT) was performed for understanding principle of why surface of coating flake from OMG is hydrophobic and why it becomes hydrophilic when pH of stock is alkaline. As a result of this test, it is determined that swelling property by change of pH of latex film, which were used as coating adhesive is the reason for hydrophobic change. 5. Hydrophilicity of coating flake increased with hydrophilic pigments. And as more of SB Latex adhesive was used and higher of calcium hardness of stock became, its hydrophilicity decreased. SB Latex adhesive film is reformed by mechanical friction. For having hydrophilicity under neutral pH, strong bruising action such as kneading is required. 6. Because swelling of adhesive film decreases as Tg of SB latex gets lower and mean diameter gets smaller, it shows hydrophobicity under neutral pH. This lowers hydrophilicity of coating flake, which leads to easy elimination with flotation reject on DIP process. Therefore, for improving future flotation yield, it is necessary to develop to use eco-friendly clean SB latex by raising Tg and increasing mean diameter for recycling, and as a result, to reduce excessive loss of coating flake as a reject from deinking process.