• 천문학논총
• /
• 제27권3호
• /
• pp.87-93
• /
• 2012

A low-dispersion fiber feed Littrow-mounted grating spectrometer for education was designed and fabricated. The dispersion element is a reflective type blazed grating Edmundoptics NT 46-075 (spatial frequency 600 lines/mm, dimension $30mm{\times}30mm$, blazed angle 8.6 degree). The optical fiber coupler module for optical guiding from telescope to spectrometer is composed of a multi-mode FC connector - FC connector optical fiber patch cord (core/cladding diameter $50{\mu}m/125{\mu}m$) and two 1.25" throw-tube couplers. The lens for collimating and imaging is a general purpose focal length 50 mm camera lens (f/1.8). The device for optical path control is a rectangular prism (size $25mm{\times}25mm$). The imaging camera sensor is a Meade DSI Pro 2 CCD sensor (black and white, $752{\times}582$ pixels and pixel size $8.3{\mu}m{\times}8.6{\mu}m$). Softwares for data logging and analysis consist of Meade Autostar Suite, NIH imagej and Vernier Logger Pro 3. The wavelength coverage range of the spectrometer is 205 nm at central wavelength 550 nm. The wavelength resolution is 1.7 nm.

• Journal of Ginseng Research
• /
• 제8권2호
• /
• pp.91-104
• /
• 1984

This study was conducted to investigate the characteristics of nonstarchy polysaccharides in Korean ginseng, (Panax ginseng C.A. Meyer). The results obtained are as follows. 1. The total sugar content of ginseng roots were decreased with increasing the cultural period. On the other hand, the crude fiber content was increased with that of the ginseng leaves or stems. But the crude fiber in root was much less than that of leaves and stems. 2. The dietary fiber content of ginseng root on 5 years old was 14.20% as neutral detergent fiber, 9.08% as acid detergent fiber, hemicellulose 5.12%, cellulose 7.98% and lignin of 1.10%, respectively. 3. Much more pectin was found in ginseng roots which was cultivated for shooter Period. And it was contained much more in the root than in the leaves and stems. 4. ginseng hemicellulose content in root was 5% to 10%. It was decreased with increasing: cultivated period. Hemicellulose was constituted of xylose, arabinose, glucose, rhamnose and xylose of these sugars was the predominant. 5. X-ray diffraction Pattern of ginseng cellulose showed maximum intensity at tile interplanar angle of 4.1$^{\circ}$.

• 센서학회지
• /
• 제20권4호
• /
• pp.221-225
• /
• 2011

Intensity-based optical fiber sensors are devised using a blocker which is located between two polymer optical fibers(POFs), one fiber is light-in and the other is light-out. This blocker is moved by an external displacement. Therefore, finding a general formulation of the relation between this displacement and transmission light intensity of various blockers is important to help develop intensity-based optical fiber sensors. In this paper, we consider blockers with arbitrary shapes from circular holes to inclined angled blockers. The transmission light intensities of such blockers should be determined by this generalized equation. In order to verify this equation, the calculated intensities of the blockers are compared with the values acquired from experiment. In the comparison, it is shown that the analytic equation can give the exact values of the transmitted light intensities for the assorted blockers. The range of the displacement measurement is also shown to be about 6 times of the radius of the hole in the case of a 9 degree inclined angle blocker.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.18-26
• /
• 2015

para-aramid fibers were treated by atmosphere air plasma to improve the interfacial adhesion. The wettability of plasma-treated aramid fiber was observed by means of dynamic contact angle surface free energy measurement. Surface roughness were investigated with the help of scanning electron microscopy and atomic force microscopy. The tensile test of aramid fiber roving was carried out to determine the effect of plasma surface treatments on the mechanical properties of the fibers. A pull-out force test was carried out to observe the interfacial adhesion effect with matrix material. It was found that surface modification and a chemical component ratio of the aramid fibers improved wettability and adhesion characterization. After oxygen plasma, it was indicated that modified the surface roughness of aramid fiber increased mechanical interlocking between the fiber surface and vinylester resin. Consequently the oxygen plasma treatment is able to improve fiber-matrix adhesion through excited functional group and etching effect on fiber surface.

• 감성과학
• /
• 제15권4호
• /
• pp.469-476
• /
• 2012

본 연구의 목적은 유연 광섬유의 스마트 의류용 로고 디자인을 개발하기 위한 디자인 지침을 도출하는 것이다. 로고 디자인을 위한 지침 도출의 기준은, 첫째 광섬유 전면에 걸쳐 적절한 밝기 정도를 나타내는지의 여부, 둘째 광섬유 전면에 걸쳐 비교적 균일한 밝기 특성을 나타내는가 등이었다. 이를 위하여, 실험 1에서는 광섬유사의 각도 변화와 길이에 따른 유연 광섬유의 밝기 특성을 분석하였으며, 실험 2에서는 실제 의류용 로고 디자인을 위한 지침을 도출하기 위해, 알파벳 대문자의 주요 형태소 등의 유연 광섬유 밝기 특성을 분석하였다. 두 개의 실험 결과를 토대로 하여, 유연 광섬유로 구성된 의류용 로고 디자인을 위한 지침과 제한점을 도출하였다.

• 센서학회지
• /
• 제13권2호
• /
• pp.96-100
• /
• 2004

Optical fiber sensors have been used to detect small amounts of chemical species. In this work, a new thin polymer-clad fiber sensor is developed. Polyaniline is chemically synthesized and thin clad layers of the polymer are easily deposited on optical fiber by dip-coating technique. The optical property of polyaniline as a sensing material is analyzed by UV-Vis-NIR. The light source is stabilized He-Ne laser at 635 nm wavelength with 1 mW power. The light power transmitted through the optical fiber is measured with a spectrophotometer. By selecting a fixed incident angle, variation of transmitted light intensity through the optical fiber can be detected as gas molecules absorbed in the polyaniline clad layer. Among the various gases, the fabricated optical fiber sensor shows good sensitivity to $NH_{3}$ gas. The optical fiber sensors was shown more improved properties than polymer based sensors which measure conductivity changes.

• 한국산학기술학회논문지
• /
• 제11권5호
• /
• pp.1730-1734
• /
• 2010

원전 2차계통수의 pH를 예측을 위해서는 샘플을 채취, 냉각시킨 후 pH를 측정하게 되는데 이 때 샘플의 온도는 pH를 변화시키는 중요한 요인이 된다. 본 연구에서는 할로겐화 은 광섬유를 이용하여 비접촉식 온도센서를 개발하였고, 열전쌍열을 이용하여 열원으로부터 방출되는 적외선을 측정하였다. 열원과 광섬유 끝단 사이의 거리 및 각도 변화에 따른 광섬유 온도센서의 출력신호를 분석하였으며, 광섬유 온도센서로 측정한 온도범위는 $25{\sim}60^{\circ}C$이다. 본 연구결과를 기초로 원전 2차계통수 pH 샘플의 온도를 측정하기 위해 할로겐화 은 광섬유를 이용한 비접촉식 온도센서의 개발이 가능할 것으로 기대된다.

• 한국광학회지
• /
• 제8권3호
• /
• pp.230-235
• /
• 1997

광섬유의 단면을 적절한 곡률의 곡면으로 가공함으로써 종래 구조에 비해 우수한 특성의 광섬유 Fabry-Peror(FP)간섭 필터를 제작할 수 있음을 이론적으로 분석하였다. 광섬유 단면의 가공된 오목거울의 곡률은 계단형 단일모드 광섬유의 도파모드를 Gaussian빔으로 가정했을 때 광섬유에서 나와 일정거리의 자유공간을 진행한 빔의 파면의 곡률과 일치하여야 하며, 이때 거울의 기울기 0.2.deg., 곡률오차 70.mu.m, 공극거리 오차 8.mu.m, 광축의 횡편차 0.5.mu.m이내의 범위에서 이상적인 배치를 벗어난 경우에도 광섬유간의 거리가 15.mu.m일 때 0.5%이하의 결합손실을 가져 종래에 비해 훨씬 간단한 새로운 구조의 광섬유 FP필터가 제작될 수 있음을 확인하였다. 마지막으로 곡면가공된 광섬유 단면의 간섭파형을 통하여 광섬유 단면을 의도된 구조로 가공할 수 있음을 보였다.

• Geomechanics and Engineering
• /
• 제37권1호
• /
• pp.85-95
• /
• 2024

This study investigates the influence of nano-silica and basalt fiber content, curing duration, and freeze-thaw cycles on the static and dynamic properties of soil specimens. A comprehensive series of tests, including Unconfined Compressive Strength (UCS), static triaxial, and dynamic triaxial tests, were conducted. Additionally, scanning electron microscopy (SEM) analysis was employed to examine the microstructure of treated specimens. Results indicate that a combination of 1% fiber and 10% nano-silica yields optimal soil enhancement. The failure patterns of specimens varied significantly depending on the type of additive. Static triaxial tests revealed a notable reduction in the brittleness index (IB) with the inclusion of basalt fibers. Specimens containing 10% nano-silica and 1% fiber exhibited superior shear strength parameters and UCS. The highest cohesion and friction angle were obtained for treated specimens with 10% nano-silica and 1% fiber, 90 kPa and 37.8°, respectively. Furthermore, an increase in curing time led to a significant increase in UCS values for specimens containing nano-silica. Additionally, the addition of fiber resulted in a decrease in IB, while the addition of nano-silica led to an increase in IB. Increasing nano-silica content in stabilized specimens enhanced shear modulus while decreasing the damping ratio. Freeze-thaw cycles were found to decrease the cohesion of treated specimens based on the results of static triaxial tests. Specimens treated with 10% nano-silica and 1% fiber experienced a reduction in shear modulus and an increase in the damping ratio under freeze-thaw conditions. SEM analysis reveals dense microstructure in nano-silica stabilized specimens, enhanced adhesion of soil particles and fibers, and increased roughness on fiber surfaces.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1265-1267
• /
• 1995

In the fiber-photodiode(PD) coupling module using v-groove, the paraxial approximation is no longer valid because the beam enters obliquely the PD substrate with the angle of $20^{\circ}$ after being reflected from the $55^{\circ}$ mirror formed by anisotropically etching of the (100) silicon wafer. In this paper, we study the beam profile incident on the PD active area and fiber-PD coupling efficiency for this case.