• 한국가스학회지
• /
• 제10권2호
• /
• pp.14-21
• /
• 2006

다공성 중공사막 분리막 기액접촉기을 이용한 황산화물 제거장치를 제작하고 다양한 상용 분리막과 자체 제작한 분리막을 이용하여 황산화물 제거 성능 실험을 수행하였다. 분리막을 이용한 황산화물 제거 성능 평가 결과 대단히 우수한 제거효율을 보였다. 중공사막을 이용하여 $SO_2$를 제거할 경우에 액막 저항을 낮출 수 있는 흡수제와 첨가제의 선정, 막 재질, 막 제조조건 등이 최적의 G-L Contactor개발에 중요한 변수로 나타났다. 향후 보다 소형화되고, 경제적이며 효율이 우수한 G-L Contactor System 개발에 대한 연구를 진행할 것이다.

• 패션비즈니스
• /
• 제11권1호
• /
• pp.15-25
• /
• 2007

As a part of the study for the materials development of compound feelings, therefore, this study investigated into the effects of the colors of warp and weft on the overall colors of fabrics, along with the visual changes of colors by the measuring angle of both warp and weft, by means of cross-dyeing of cotton/PET union fabrics. First, the dyeing of cotton and PET fabrics individually with the same color, the dyeing of PET fabrics followed by that of cotton fabrics resulted in a small difference in color than the dyeing in the reversed order. Second, in the case of the dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the color of cotton fiber, which is warp, gave much influence. In addition, the color change was remarkable among complementary colors, while it was negligible among adjacent colors. Third, in the case of dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the results were different by the measuring angle. When PET was fixed in green and cotton was dyed in ten colors, color-deepening was observed by the inclination in the direction of warp and weft without the dominance over all colors like cotton. When cotton was dyed in red and PET in ten colors, the color of PET appeared dimly in the horizontal case by the direction of the light, and red appeared as inclined in the direction of warp and weft. This is because of the dominance of cotton color over the overall color, since the density of cotton fiber, the warp of union fabrics, is higher than that of PET, the weft. Thus, this is to be considered in the selection of the warp's color. In view of the above results, the color changes are outstanding when the color of warp dominates the overall color and when the colors of warp and weft are complementary, in comparison with the case when the colors are adjacent. The colors also change by the measuring angle.

• 한국통신학회논문지
• /
• 제25권9B호
• /
• pp.1542-1550
• /
• 2000

이동통신망에서 RF 신호를 송수신하는 기지국(base station)과 이동 통신 신호의 교환 전송을 담당하는 중앙국(central station)을 광섬유로 연결하여 구성한 SCM(Subcarrier Multiplexing) 광링크는 RF 신호를 효율적이고 경제적으로 전송하는 시스템으로 널리 사용되고 있다. 그러나 링크의 전송 성능이 광전송 링크와 무선링크의 다양한 환경에 의해 크게 제한되므로, 본 논문에서는 이동통신망에서 CDMA RF 신호전송을 위한 SCM 광링크 시스템의 분석적 모델을 제시하고 다양한 링크 환경에서 전송 성능을 분석하였다. 특히, 광전송 링크에서 레이저 다이오드(LD: Laser Diode)에 의해 발생하는 비선형 왜곡과 무선링크에서 다중 가입자에 의해 발생되는 다중접속간섭(MAI: Multiple Access Interference)을 고려하여 최적의 전송 성능 조건을 제시하였다. 제안된 분석적 모델링으로부터 얻은 성능분석을 통해 최적의 시스템 성능은 사용된 코드의 길이나 다중 가입자의 수에 따라 변화하며 광링크 고유의 잡음과 LD 비선형 왜곡에 의한 영향이 최소가 되는 광변조지수(optical modulation index)를 선택함으로써 얻어짐을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.581-590
• /
• 2020

Pulp refining is the major way to alter the properties of fibers and formed paper. Different combinations of the bar profile of the rotor and stator during low consistency refining processes directly affect the properties of the paper. In this study, a mixture of softwood and hardwood pulp was refined by varying the bar angle of the stator while that of the rotor is fixed at 0º. The pulp samples were collected at different refining times. Then, the pulp and paper properties, such as beating degree, fiber external fibrillation, and tensile and tear indexes were measured to explore the effects of the combined refining plates at different bar angles on paper properties. The results of the experiment show that the combined refining plate of 0º and 5º recorded the most significant improvement in the pulp beating degree and fiber external fibrillation. This consequently increased the fiber bonding area, which in turn, improved both the tensile and the tear indexes of the paper. Also, the influence of the combined refining plates with a larger bar angle on the paper properties was weaker compared to that of smaller angles. This study not only provides ideas for the bar profile design but also improves the optimal selection of refining plates.

• Journal of Animal Science and Technology
• /
• 제62권6호
• /
• pp.777-789
• /
• 2020

Intense artificial selection has been imposed to Luzhong mutton sheep population in the past years. Improvements on growth and reproductive performance are two breeding goals in the present herd. Although some progresses were phenotypically observed possibly due to inbreeding induced by strong selection in terms of these traits, the genomic evaluation was poorly understood. Therefore, a high-density SNP array was used to characterize the pattern of runs of homozygosity (ROH), estimate inbreeding and inbreeding depressions on early growth performance and litter size based upon ROH, and scan positive selection signatures of recent population. Consequently, a low inbreeding level was observed which had negative effects on litter size, but not on early growth performance. And 160 genes were under selection, of which some were reported to be linked to several traits of sheep including body weight, litter size, carcass and meat quality, milk yield and composition, fiber quality and health, and the top genes were associated with growth (growth hormone [GH]- growth hormone receptor [GHR]- Insulin-like growth factor 1 [IGF1] axis) and litter size (bone morphogenic proteins [BMPs]-associated). The effectiveness of previous breeding measures was highlighted, but purging selection was proposed to alleviate the inbreeding depression on litter size, providing some genomic insights to breeding management of Luzhong mutton sheep.

• 폴리머
• /
• 제36권5호
• /
• pp.555-563
• /
• 2012

사출 성형품에서 발생되는 뒤틀림은 성형공정 중 제품의 불균일한 수축과 잔류응력의 이완으로 인하여 나타나는 현상이다. 휨이나 뒤틀림 현상을 방지하기 위해서 성형품이 강성이 있도록 설계하거나 수지에 유리섬유 등으로 보강하여 사용한다. 본 연구에서는 플라스틱의 성형품에서 성형품의 설계에 따른 뒤틀림 현상을 성형조건 별로 알아보았다. 성형품의 설계는 리브로 보강된 두 종류와 보강 리브가 없는 시편을 사용하였다. 수지는 유리섬유로 보강된 비결정성 수지인 PC와 ABS를 사용하였다. 실험결과 휨은 리브의 설계에 따라 큰 변화를 보였다. 게이트 주변, 게이트 반대쪽, 그리고 흐름방향쪽 등 측정위치에 따라서 휨은 다양하게 나타났다. 이러한 휨의 결과는 유리섬유의 배향과도 크게 관련이 있음을 컴퓨터 해석을 통해 확인할 수 있었다. 리브가 없는 단순 평판에서 휨이 가장 작게 나타났으며, 리브가 흐름방향으로 놓여있는 경우가 휨에 대한 큰 저항을 보였다. 시편에 나타난 휨은 성형조건보다는 제품의 설계에 따라 크게 변하였다. 리브의 설계와 그에 따른 게이트의 위치 설정은 유리섬유의 배향과 직접적인 관련이 있으므로 성형품의 휨 조절에 매우 중요함을 보여주었다.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.628-637
• /
• 2004

In many drinking water treatment plants, chlorination process is one of the main techniques used for the disinfection of water. This disinfecting treatment leads to the formation of disinfection by-products (DBPs) such as haloacetonitriles (HANs), trihalomethanes (THMs), haloacetic acids (HAAs). In this study, headspace-solid phase microextraction (HS- SPME) technique was applied for the analysis of HANs in drinking water. The effects of experimental parameters such as selection of SPME fiber, the addition of salts, magnetic stirring, extraction temperature, extraction time and desorption time on the analysis were investigated. Analytical parameters such as linearity, repeatability and detection limits were also evaluated. The $50/30{\mu}m$-divinylbenzene/carboxen/polydimethylsiloxane fiber, extraction time of 30 minutes, extraction temperature of $20^{\circ}C$ and desorption time of 1 minute at $260^{\circ}C$ were the optimal experimental conditions for the analysis of HANs. The correlation coefficients ($r^2$) for HANs was 0.9979~0.9991, respectively. The relative standard deviations (%RSD) for HANs was 2.3~7.6%, respectively. Detection limits (LDs) for HANs was $0.01{\sim}0.5{\mu}g/L$, respectively.

• 센서학회지
• /
• 제25권4호
• /
• pp.280-284
• /
• 2016

For an arc-flash protection system, the selection of arc-flash sensor in implementation is largely dependent on the coverage area and the spatial resolution. Typically, a point sensor is used to accurately measure an arc event within a very narrow region; whereas, a loop or a line sensor can cover several electrical compartment at the same time, but with a poor resolution. In this work, a novel scheme for an arc-flash sensor was developed by making use of the transmission loss of plastic optical fibers (POFs) to cover a broad range with a high spatial resolution. By relating the amplitude ratio of the arc-signals at the ends of the POF with the arc-location, arc events could be located with a resolution of ~5 cm within a spatial range of 10 m, which has not been reported yet.

• 한국전자파학회논문지
• /
• 제25권11호
• /
• pp.1104-1112
• /
• 2014

위성에 활용하기 위한 전개형 경량화 안테나를 구현하기 위하여 사용되는 센서의 요구 성능을 충족하는 안테나의 설계방법을 제시하였다. 탑재되는 SAR(Synthetic Aperture Radar)의 성능을 충족하기 위한 안테나의 제반 특성과 전개방법 및 재료, 중앙판이 있는 전개형 안테나의 특성을 분석하였다. 경량화 안테나로 솔리드 전개형 안테나와 메쉬 전개형 안테나의 전개 성능을 분석하고, 사용 재료로서 CFRP(Carbon Fiber Reinforced Plastics)의 특성을 실험하였다. 중앙판이 있는 전개형 안테나의 경우, 전개 패널과 메쉬를 사용하는 경우 요구 성능을 충족할 수 있음을 확인하였다.

• 상하수도학회지
• /
• 제33권6호
• /
• pp.437-446
• /
• 2019

Reverse osmosis seawater desalination facilities can extend the cleaning cycle and replacement time of the reverse osmosis membrane by pretreatment process. Selection of pretreatment process depends on water quality. It was attempted in this study to select approriate pretreatment process for the Masan bay, which was high in particles and organic content. For this purpose, performances of pretreatment processes such as filter adsorber (FA), pore controllable fiber (PCF), and ultrafiltration (UF) were compared based on the silt density index (SDI). The SDI value of the filtrate should be less than 3. The study results showed that UF can produce the filtrate quality satisfying the requirement. However, the transmembrane pressure (TMP) of UF increased quickly, reaching 0.6 bar within 4 days. In order to secure stable operation, FA and PCF were combined with UF. The study results showed that combination of PCF and UF was able to extend the filtration duration (more than 2 months) until to reach TMP of 0.6 bar.