• 펄프종이기술
• /
• 제35권2호
• /
• pp.58-64
• /
• 2003

Because of its tendency of making strong Hoc on the fiber surface with fines, Meogujaengi has not been valued as a material of Hanji. As an attempt to manufacture high value-added products using the material made from Jumchihanji, this study performed morphological classification and chemical component analysis and selection of pulping of Meogujaengi method. As a result, it can be concluded as follows, 1. Meogujaengi is assumed to be a local variety of Broussonetia karinoki and its outward appearance is distinguished from Broussonetia kazinoki. 2. The bast fiber of Meogujaengi is longer and thinner than that of Broussonetia papyrifera or Broussonetia kazinoki. However, because of the coarse linear of fiber tissue, there are many clusters. 3. The cluster phenomenon of Meogujaengi is nothing to do with its chemical components. Although the contents of its chemical components are different from those of Broussonetia kazinoki, no component was found that obstructs pulping. 4. The pretreatment for suppressing the occurrence of clusters of Meogujaengi was effective, and it was necessary to do secondary beating using hollander beater after beating mixed with PAM using knife beater.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권7호
• /
• pp.418-423
• /
• 2000

The fiber Fabry-Perot interferometric(FFPI) sensor is well known in the field of industrial diagnosis due to its outstanding properties such as tiny size, simple and rugged structure, and easy interrogation. As other fiber interferometric sensors, it also suffers from ambiguous output caused by highly periodic feature in its optical transfer function. In most cases, the ambiguity leads to relatively short dynamic operating range and long processing time during power-on reset, which limits its application to some specific fields requiring very high resolution. In this paper a method based on double sensing scheme was proposed to overcome the above difficulty. By employing a fringe selection auxiliary FFPI sensor the original FFPI sensor can identify its true position on the phase domain. The performance test with 10mm FFPI sensor and a thermocouple temperature sensor for reference shows wide dynamic range 0-900$\ell$ keeping a reasonable resolution of 0.1$\ell$ over the entire range.

• Composites Research
• /
• 제36권4호
• /
• pp.259-263
• /
• 2023

This study investigated the open hole tensile (OHT) properties of carbon fiber/epoxy composites and compared them to bolt joint tensile (BJT) properties. The net nominal modulus and strength (1376 MPa) were found to be higher than the gross nominal strength (1041 MPa), likely due to increasing hole size. The OHT and BJT specimens exhibited similar stiffness, as expected without bolt rotation causing secondary bending. OHT specimens experienced a sharp drop in stress indicating unstable crack propagation, delamination, and catastrophic failure. BJT specimens failed through shear out on the bolt side and bearing failure on the nut side, involving fiber kinking, matrix splitting, and delamination, resulting in lower strength compared to OHT specimens. The strength retention of carbon fiber/epoxy composites with open holes was 66%. Delamination initiation at the hole's edge caused a reduction in the stress concentration factor. Filling the hole with a bolt suppressed this relieving mechanism, leading to lower strength in BJT specimens compared to OHT specimens. Bolt joint efficiency was calculated as 15%. The reduction in strength in bolted joints was attributed to fiber-matrix splitting and delamination, aligning with Hart Smith's bolted joint efficiency diagram. These findings contribute to materials selection and structural reliability estimation for carbon fiber/epoxy composites. They highlight the behavior of open hole and bolt joint configurations under tensile loading, providing valuable insights for engineering applications.

• 대한환경공학회지
• /
• 제35권10호
• /
• pp.743-748
• /
• 2013

본 연구의 목적은 수분이 함유된 한지의 수분을 에탄올, 메탄올, 펜탄 등과 같은 비극성물질로 치환하여 한지 여과지를 만드는데 있다. 실험은 적정 비극성물질의 선택 및 적정 건조방법 그리고 제조된 한지여과지의 물리화학적 특성을 알아보기 위하여 수행되었다. 한지 종이필터를 제조하기 위하여 한지에 함유된 수분을 치환하기 위한 최적 물질은 에탄올이었으며 적정한 건조방법은 냉동 후 진공에 의해 수분을 건조하는 냉동건조방법이었다. 냉동건조에 의해 제조된 필터의 겉보기 밀도는 0.11-0.13 g/mL 으로 자연건조방법의 절반 이었으며 공극율은 약 90%로서 다공성을 나타내었다. 전자현미경 관찰결과 자연건조 및 열건조에 의해 제조된 여과지의 섬유는 섬유끼리 매우 가깝게 밀착되어 있었으나 냉동건조에 의해 제조된 섬유는 섬유간에 간격이 이격되어 있었다. 제조된 여과지의 압력손실은 자연건조 및 열건조 여과지보다 냉동건조에 의해 제조된 한지가 매우 낮았으며 BTEX제거효율은 한지의 수분을 비극성 물질에 의해 치환한 것보다 자연건조시킨 한지가 우수하였다.

• The Journal of Advanced Prosthodontics
• /
• 제8권2호
• /
• pp.158-166
• /
• 2016

PURPOSE. The aim of this study was to determine the fracture resistance and the mode of fracture of endodontically treated teeth restored with different fiber posts and all-ceramic crowns. MATERIALS AND METHODS. Two glass fiber reinforced post systems in two different sizes and polyethylene fiber ribbon in two different thicknesses (n=10) were used. The specimens, restored with all-ceramic crowns, were subjected to a compressive load (in N) delivered at a 130-degree angle to the long axis until a fracture could be noted. The results were analyzed statistically with a One-Way ANOVA test (P<.05). RESULTS. Statistically significant differences were observed between the mean fracture resistance values of Postec, Snowlight, and Kerr Connect thin specimens (P<.0095). The Postec results (395.70 N) were found to be significantly higher than the others. No statistical difference was observed among the thick specimens (P<.2657). The mean fracture resistance values of the Snowlight thick samples were found to be higher than those of the Snowlight thin samples. The specimens were always fractured around the cemento-enamel junction at the palatinal side. No post fracture was observed for the thin Snowlight and Kerr Connect specimens or for the thick Postec and Kerr Connect specimens. Among the common failure types of the specimens, the worst was observed to be the root fracture failure. The highest post dislodgement failure result (80%) was obtained from the thin Kerr Connect specimen. CONCLUSION. In terms of optimizing fracture resistance, the fiber post size selection should be done according to the forces applied to the restored teeth.

• Composites Research
• /
• 제12권4호
• /
• pp.42-54
• /
• 1999

섬유-금속 적층 복합재료(FMLC)는 섬유와 금속 박판으로 구성된 새로운 형태의 구조재로 가볍고 우수한 피로 특성을 가지며 금속과 같이 가소성과 충격저항성이 우수하고, 가공성이 뛰어나다. 본 연구에서는 여러 하중 조건하에 있는 섬유-금속 적층 복합재료를 유전자 알고리듬을 이용하여 최적 설계하였다. 전단변형이론에 근거한 유한요소법을 사용하여 적층판을 해석하였으며, 설계변수로 금속판의 강도와 섬유 층의 수에 따른 적층각도를 두었다. 섬유층과 금속판의 적합도 함수로는 각각 Tasi-Hill failure criterion과 Miser yield criterion을 사용하였다. 유전자 알고리듬의 연산자로는 토너먼트 선택과 균일 교배를 사용하였다. 효율적인 진화를 위해 엘리티스트 모델을 사용하며, 높은 정확도를 가진 해를 얻기 위해 크리프 무작위 탐색(creeping random search) 방법을 통해 더 우수한 자손을 얻었다. 여러 가지 하중 조건에 대하여 최적설계 결과를 나타내었으며, 파괴 지수 측면에서 탄소섬유강화복합재료(CFRP)와 비교하였다. 해석 결과 섬유-금속 적층 복합재료는 탄소섬유강화복합재료에 비하여 집중하중이나 분포하중 형태에 대하여 우수한 특성을 보였으며, 파괴 지수의 편차가 적어 예기치 않은 하중에 잘 견딜 것으로 사료된다.

• 패션비즈니스
• /
• 제26권4호
• /
• pp.100-111
• /
• 2022

After the corona pandemic, when consumers choose clothes, the issue of sustainability has become a more important selection criterion. The eco-friendly functional fiber used in the study is a smartcell, which has functions such as UV protection, decomposition of harmful substances, deodorization, antibacterial and biodegradation. This eco-friendly functional fiber was dyed using five kinds of natural dyes to examine the color change according to dyeability and dyeing conditions. As natural dyes, gardenia, turmeric, sappan wood, lac, and indigo were used. For comparison with smartcell, rayon, a cellulose regenerated fiber, and wool fiber, a protein fiber, were dyed under the same conditions to compare dyeability and color. The study results are as follows. It was found that smartcell had superior dyeability compared to rayon and wool in gardenia dye and showed lower dyeability than wool when dyeing turmeric, sappan wood, and lac dyes, but showed superior or similar dyeability than rayon. In case of indigo dyeing, the dyeability of smartcell was the best when dyed once, but it was found that smartcell had a lower effect on repeated dyeing compared to wool or rayon. Therefore, smartcell has superior dyeability compared to rayon fiber in gardenia, turmeric, sappan wood, and lac dyeing, and in case of indigo dyeing, it is suitable for light dyeing. When smartcell is produced as textile fashion products, natural dyeing is actively introduced and commercialized, and it is hoped that this study can be a reference material.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.491-498
• /
• 1996

The development of a compact two-wavelength Nd:YAG laser for dental and ENT applications is presented. The Nd:YAG resonator generates either 1.06$\mu$m or 1.32$\mu$m. The wavelength selection is made at the control panel. The Nd:YAG laser parameters at 1.06$\mu$m are ; the maximum pulse duration of 150$\mu$s, repetition rates of I-100Hz, and the maximum average power of 25W. At 1.32$\mu$m, the pulse duration is the same where the repetition rates and the maximum average power are I-30Hz and lOW respectively. High voltage power supply consists of a simmer module and two identical high voltage DC converters. In order to make a complete medical laser system, an optical fiber delivery unit, foot pedal and water spray handpiece are also developed. The wavelength selection is reliable since no movement of optical or mechanical components is required. The high voltage power supply is compact, easy to be maintained and applicable for other laser systems due to its modular design.

• 방사선산업학회지
• /
• 제4권3호
• /
• pp.215-219
• /
• 2010

We have subjected to gamma-irradiation to citrus buds and then grafted onto mature citrus tree. Mutant citrus branch lines have been induced. As a result of first selection, we found the several mutant lines showing interesting phenotypes such as higher sugar content. We have selected several branches showing good qualities such as higher sweetness and/or lower acidity. Some branch lines showed over $13^{\circ}Brix$ sugar content and below 0.9% acidity. Other mutant branch lines showed the changes of shape, size, peel thickness, and fiber contents or distribution of fruits. The results suggest that gamma-irradiation is an effective tool for induction of citrus mutant lines.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2006년도 제24회 학술대회발표 논문집
• /
• pp.11-15
• /
• 2006

This work aims to clarify the character and selection of repair papers, based on fibre orientation information of paper cultural properties under restoration; using nondestructive image analysis applied to micrographs of paper surfaces. Image analysis using fast Fourier transform with suitable modifications was demonstrated to be an effective means to determine angle and intensity of fiber orientation as a nondestructive method. In the case of contemporary repair papers, the Japanese handmade paper exhibited a high anisotropy value, while the Korean handmade papers exhibited low anisotropy values. Korea and Japanese traditional hand making papers were well distinguished. Korea and Japanese papers made in the traditional ways showed its own characteristic orientation behavior in accordance with the motion of a bamboo wire.