• 한국초지조사료학회지
• /
• 제19권3호
• /
• pp.221-232
• /
• 1999

일반적으로 건물수량과 암이삭비율을 사일리지용 옥수수(Zea mays L.)의 생산성 비교에서 중요한 요인으로 생각하고 있다. 그러나 사일리지용 옥수수의 품종 비교에는 사초생산성 뿐만아니라 경엽의 품질도 중요하다. 그래서 본 시험은 정부장려 8품종을 한달 간격으로 파종하였을 때 사일리지용 옥수수의 부위별 사료가치를 비교하기 위하여 수행하였다. ADF, NDF, ADL, hemicellulose 및 cellulose 함량은 경엽, 암이삭 및 전식물체 모두에서 적기파종시가 만기파종시보다 낮았다(P<0.01). 공시 품종간에는 경엽과 전식물체에서 섬유소 함량의 차이가 있었다(P<0.01). 파종기간 TDN 및 $NE_1$는 경엽 및 전식물체에서 유의적인 차이가 있었다. 공시품종간 TDN 및 $NE_1$ 는 경엽, 암이삭 및 전 식물체 모두에서 유의적인 차이가 있었다. 전 식물체에서는 공시품종중 'G4624', 'P3352' 및 'P3394'의 TDN 및 $NE_1$가 다른 품종보다 높았다(P<0.05). In vitro 건물 소화율은 적기파종이 만기파종보다 높았으며(P<0.05), 또한 공시품종간에도 유의적인 차이가 있었다. ln vitro 건물소화율과 NDF, ADF, hemicellulose 및 cellulose의 상관계수는 각각 $-0.82^{**}$, $-0.7^{**}$, $-0.63^{**}$ 및 $-0.69^{**}$이었다. 이상의 연구결과를 볼 때 사일리지용 옥수수의 사료가치를 높이기 위해서는 적기파종이 옥수수의 사료가치를 증가시킬 수 있었다. 그리고 품종간 비교에서는, 특히, 경엽과 전식물체의 사료가치가 차이가 있었다. 그러므로 사일리지용 옥수수의 품종 선발에는 경엽과 전식물체의 사료가치도 중요한 요인이라고 생각된다.

• 대한본초학회지
• /
• 제23권2호
• /
• pp.25-31
• /
• 2008

Objectives : In order to distinguish morphological characteristics of trunk bark and root bark of Ulmus davidiana var. japonica (Rehder) Nakai and the trunk bark and root bark of Hemiptelea davidii Planchon were sampled and compared in terms of their external and internal features with flour states according to their medical use, through microscopic examination. Methods : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and the flour of it was mounted by the liquid made by the same ratio of each of glycerin, acetic acid, and water, and then observed and photographed by olymphus-BHT. Results : 1. Internal Features 1) A large parenchymatous cell was observed in the phloem of the slice of both trunk bark and root bark of Ulmi Cortex, However, both of the trunk bark and root bark of Hemipteleae Cortex did not have parenchymatous cell in the phloem; instead, stone cells including much square crystal of calcium oxalate were distributed around fiber bundle, and the parenchymatous cell included much druse crystal of calcium oxalate. 2) In both the Ulmi Cortex and Hemipteleae Cortex, rhytidome was observed in trunk bark, but not in root bark, but in the parenchymatous cell of the root bark of the Ulmi Cortex contained starch grain. 2. Flour States 1) In the flour of root bark of the Ulmi Cortex, a large parenchymatous cell was observed. However, in the flour of trunk bark and root bark of Hemipteleae Cortex, no parenchymatous eel was found; instead, stone cell including square crystal of calcium oxalate and druse crystal of calcium oxalate were observed. 2) There was no remarkable difference between the trunk bark and root bark of Hemipteleae Cortex. However, starch grain was contained in the parenchymatous cell of the root bark of Ulmi Cortex but not in the trunk bark of it. Conclusions : There were some morphological differences in external, internal, and flour parts of Ulmi Cortex and Hemipteleae Cortex. In particular, there was a morphological difference in flour states between the trunk bark and root bark of Ulmi Cortex, it is possible to use microscope to distinguish their flour states.

• 한국대기환경학회지
• /
• 제25권2호
• /
• pp.108-121
• /
• 2009

The suspended particulate matters have been collected on membrane filters and glass fiber filters by an 8-stage cascade impactor for 2 years (Sep. 2005${\sim}$Sep. 2007) in Kyung Hee University-Global Campus located on the border of Yongin and Suwon. The 20 chemical species (Al, Mn, Si, Fe, Cu, Pb, Cr, Ni, V, Cd, Ba, $Na^+$, ${NH_4}^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were analyzed by an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on these chemical information, the PMF receptor model was applied to identify the source of ambient size-by-size particulate matters. The receptor modeling is the one of the statistical methods to achieve resonable air pollution management strategies. A total of 10 sources was identified in 9 size-ranges such as long-range transport, secondary aerosol, $NH_{4}NO_{3}$ related source, coal combustion, sea-salt, soil, oil combustion, auto emission, incineration, and biomass burning. Especially, the secondary aerosol source assorted in fine and coarse modes was intensively studied.

• 콘크리트학회논문집
• /
• 제24권6호
• /
• pp.737-744
• /
• 2012

강재형 댐퍼는 주로 철골구조에서 많이 사용되어 왔으나 최근에 들어 철근콘크리트 건물에도 사용빈도가 증가하는 추세이다. 철근콘크리트 건물에 강재이력댐퍼를 적용하기 위해서는 댐퍼의 접합부재가 댐퍼의 지지능력을 보 및 벽체로 전달하기에 적합한 강도와 강성을 지녀야만 한다. 하지만 균열로 인한 철근콘크리트 요소의 손상은 부득이한 것으로, 댐퍼로부터 지지부재로의 하중전달 메커니즘과 댐퍼 지지부재 이력특성의 규명은 이러한 댐퍼의 거동을 평가하는데 매우 중요하다. 이에 이 연구에서는 EaSy 댐퍼와 같은 강재판형 이력댐퍼의 지지부재와 RC벽체와의 접합상세를 대상으로 실험을 실시하였다. 실험 결과 전단과 관련된 균열의 양과 패턴을 제외하고는 모든 실험체의 파괴패턴은 거의 동일한 것으로 나타났으며, 잘 분산된 균열을 지닌 HD-3 실험체가 에너지소산능력, 강성저하 그리고 강도저하 측면에서 좋은 거동을 보여주었다.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.391-398
• /
• 2016

음향방출기법은 구조물에 존재하는 손상 및 손상 메커니즘을 규명하는 가장 유효한 비파괴검사 수단으로 널리 이용되고 있다. 그러나 기존의 손상위치표정 기법은 탄성파 전파 속도에 크게 의존하는 기법의 한계에 의하여 복합재료 또는 이종의 재료로 구성된 구조물에서의 손상을 탐지하기 어려운 한계점을 가지고 있다. 최근 다양한 분야에서 사용되고 있는 압축천연가스(CNG) 저장용기는 무게와 강성의 효율을 위하여 복합재료를 사용하여 외부를 보강하는 새로운 형태의 구조를 사용하고 있다. 이러한 다층 복합소재의 사용으로 기존의 손상탐지기법으로는 저장용기의 외부에서 가해지는 충격 혹은 결함에 의한 저장탱크에 발생한 손상의 측정이 매우 어렵게 되었다. 이러한 한계를 극복하기 위하여 본 연구에서는 선행연구를 통하여 개발된 에너지 기반 contour D/B map 기법을 이용하여 4 가지 형식의 CNG 저장탱크에 발생한 외부 충격 신호의 손상 위치를 측정하였다. 각각의 형식의 저장탱크에서 측정된 손상 위치 결과를 비교 분석하여 새로운 기법의 측정 성능을 알아보았다.

• 대한본초학회지
• /
• 제20권4호
• /
• pp.95-101
• /
• 2005

Objectives : In order to distinguish Cnidii Rhizoma and Ligustici Chuanxiong Rhizoma (cultivated in Korea and China), their external and internal states were observed via microscopic examination. Methods : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Results : Cnidii Rhizoma, Ligustici Chuanxiong Rhizoma (from Korea), and Ligustici Chuanxiong Rhizoma (from China) all demonstrated similar patterns as following : 1. external form 1) showing irregular nodular form with $2{\sim}7cm$ diameter. 2) having several trochites in parallel, and nodulose root trace on surface. 3) in addition to yellow-white or yellow-gray intersections, yellow-brown oil sacs were distributed, with cambium resembling a form of annulus. 2. internal form 1) its root and rhizome is composed of 10 layers of cork, with narrow cortical layers. 2) its phloem is wide, and oval light yellow-brown oil sacs are distributed around. The closer to the cambium, the smaller it is. 3) cambium is a form of a wave-like ring or an irregular polygon. 4) xylem and vessel are rare, most of which are arranged in a 'V' format, and sometimes xylem fiber is found. 5) pith is composed of parenchymatous cell, and parenchyma is full of starch grains. Conclusions : In conclusion, C officinale, L. chuanxiong (from Korea), and L. chuanxiong (from China) have rhizomes in a similar form with no special difference. Therefore, it is concluded that C. officinale, L. chuanxiong (from Korea), and L. chuanxiong (from China) are categorized into the same species.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.3106-3106
• /
• 2001

Imaging spectrometry or hyperspectral imaging is a recent development that makes possible quantitative and qualitative measurement for food quality and safety. This paper presents the research results that a hyperspectral imaging system can be used effectively for detecting fecal (from duodenum, cecum, and colon) and ingesta contamination on poultry carcasses from the different feed meals (wheat, mile, and corn with soybean) for poultry safety inspection. A hyperspectral imaging system has been developed and tested for the identification of fecal and ingesta surface contamination on poultry carcasses. Hypercube image data including both spectral and spatial domains between 430 and 900 nm were acquired from poultry carcasses with fecal and ingesta contamination. A transportable hyperspectral imaging system including fiber optically fabricated line lights, motorized lens control for line scans, and hypercube image data from contaminated carcasses with different feeds are presented. Calibration method of a hyperspectral imaging system is demonstrated using different lighting sources and reflectance panels. Principal Component and Minimum Noise Fraction transformations will be discussed to characterize hyperspectral images and further image processing algorithms such as image band ratio of dual-wavelength images and its histogram stretching with thresholding process will be demonstrated to identify fecal and ingesta materials on poultry carcasses. This algorithm could be further applied for real-time classification of fecal and ingesta contamination on poultry carcasses in the poultry processing line.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.701-717
• /
• 2003

The objective of this study was to extensively estimate the air quality trends of the study area by surveying con-centration trends in months or seasons, after analyzing the mass concentration of PM-10 samples and the inorganic lements, ion, and total carbon in PM-10. Also, the study introduced to apply the PMF (Positive Matrix Factoriza-tion) model that is useful when absence of the source profile. Thus the model was thought to be suitable in Korea that often has few information about pollution sources. After obtaining results from the PMF modeling, the existing sources at the study area were qualitatively identified The PM-10 particles collected on quartz fiber filters by a PM-10 high-vol air sampler for 3 years (Mar. 1999∼Dec.2001) in Kyung Hee University. The 25 chemical species (Al, Mn, Ti, V, Cr, Fe, Ni, Cu, Zn, As, Se, Cd, Ba, Ce, Pb, Si, N $a^{#}$, N $H_4$$^{+}$, $K^{+}$, $Mg^{2+}$, $Ca^{2+}$, C $l^{[-10]}$ , N $O_3$$^{[-10]}$ , S $O_4$$^{2-}$, TC) were analyzed by ICP-AES, IC, and EA after executing proper pre - treatments of each sample filter. The PMF model was intensively applied to estimate the quantitative contribution of air pollution sources based on the chemical information (128 samples and 25 chemical species). Through a case study of the PMF modeling for the PM-10 aerosols. the total of 11 factors were determined. The multiple linear regression analysis between the observed PM-10 mass concentration and the estimated G matrix had been performed following the FPEAK test. Finally the regression analysis provided source profiles (scaled F matrix). So, 11 sources were qualitatively identified, such as secondary aerosol related source, soil related source, waste incineration source, field burning source, fossil fuel combustion source, industry related source, motor vehicle source, oil/coal combustion source, non-ferrous metal source, and aged sea- salt source, respectively.ively.y.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.90-95
• /
• 2014

Local wall thinning is a point of concern in almost all steel structures such as pipe lines covered with a thermal insulator made up of materials with low thermal conductivity(fiberglass or mineral wool); hence, Non Destructive Technique(NDT) methods that are capable of detecting the wall thinning and defects without removing the insulation are necessary. In this study we developed a Pulsed Eddy Current(PEC) system to detect the wall thinning of Ferro magnetic steel pipes covered with fiber glass thermal insulator and shielded with Aluminum plate. The developed system is capable of detecting the wall thickness change through an insulation of thickness 10cm and 0.4mm aluminum shielding. In order to confirm the thickness change due to wall thinning, two different sensors, a hall sensor and coil sensor were used as a detecting element. In both cases, the results show a very good change corresponding to the thickness change of the test specimen. During these experiments a carbon steel tube of diameter 210mm and a length of 620mm, which is covered with insulator of 95mm thickness was used. To simulate the wall thinning, the thickness of the tube is changed for a specified length such as 2.5mm, 5mm and 8 mm from the inner surface of the tube. A 0.4mm thick Aluminum plate was covered on the Test specimen to simulate the shielding of the insulated pipelines. For both hall sensor and coil detection methods Fast Fourier transform(FFT) was calculated using window approach and the results for the test specimen without Aluminum shielding were summarized which shows a clear identification of thickness change in the test specimen by comparing the magnitude spectra. The PEC system can detect the wall thinning under the 95 mm thickness insulation and 0.4 mm Al shielding, and the output signal showed linear relation with tube wall thickness.

• Smart Structures and Systems
• /
• 제14권5호
• /
• pp.811-830
• /
• 2014

A numerical study has been carried out to simulate an innovative monitoring procedure to detect and localize damage in reinforced concrete beams retrofitted with carbon fiber reinforced polymer (CFRP) unidirectional laminates. The main novelty of the present simulation is its ability to conduct the electromechanical admittance monitoring technique by considerably compressing the amount of data required for damage detection and localization. A FEM simulation of electromechanical admittance-based sensing technique was employed by applying lead zirconate titanate (PZT) transducers to acquire impedance spectrum signatures. Response surface methodology (RSM) is finally adopted as a tool for solving inverse problems to estimate the location and size of damaged areas from the relationship between damage and electromechanical admittance changes computed at PZT transducer surfaces. This statistical metamodel technique allows polynomial models to be produced without requiring complicated modeling or numerous data sets after the generation of damage, leading to considerably lower cost of creating diagnostic database. Finally, a numerical example is carried out regarding a steel-reinforced concrete (RC) beam model monotonically loaded up to its failure which is also retrofitted by a CFRP laminate to verify the validity of the present metamodeling monitoring technique. The load-carrying capacity of concrete is predicted in the present paper by utilizing an Ottosen-type failure surface in order to better take into account the passive confinement behavior of retrofitted concrete material under the application of FRP laminate.