• 제목/요약/키워드: Fiber Dispersion

검색결과 499건 처리시간 0.02초

광 위상 공액기를 중심으로 각 전송 구획에서 하나의 단일 모드 광섬유 중계 구간에만 RDPS를 갖는 광전송 링크의 최적 설계 조건 (Optimal Design Condition of Optical Links with Residual Dispersion Per Span (RDPS) Presented in Only One Single Mode Fiber Span in Each Transmission Session Respect with Optical Phase Conjugator)

  • 이성렬
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2012년도 춘계학술대회
    • /
    • pp.594-597
    • /
    • 2012
  • 전체 전송로 중간에 광 위상 공액기 (OPC; optical phase conjugator)를 둔 광전송 링크에서 파장 분할 다중 (WDM; wavelength division multiplexed) 송신기부터 OPC까지의 전반 전송 구획과 OPC부터 WDM 수신부까지의 후반 전송 구획 각각을 구성하는 단일 모드 광섬유 (SMF; single mode fiber)의 중계 구간 (span)들 중 단지 하나의 중계 구간에서만 RDPS(residual dispersion per span)만 갖고 나머지 중계 구간에서는 RDPS가 0 ps/nm로 설계된 전송 링크에서 WDM 신호를 최상의 성능으로 전송하기 위한 최적의 링크 구조를 도출하였다.

  • PDF

표준 단일모드 광섬유와 EDFA를 이용한 10 Gb/s 40 파장다중 채널 신호의 3000 km 전송에서 분산 보상 맵 최적화와 분산 기울기 불일치 영향 (Dispersion Map Optimization and Dispersion Slope Mismatch Issue on 40 Channel x 10 Gbit/s Transmission Over 3000 km Using Standard SMF and all EDFA Amplification)

  • 김민성;최보훈
    • 한국통신학회논문지
    • /
    • 제30권1A호
    • /
    • pp.1-9
    • /
    • 2005
  • 표준 단일모드 광섬유를 전송선으로 사용하고, Raman 증폭기 없이 EDFA 증폭기만을 사용하여, 각 채널당 10 Gb/s의 파장다중화된 40개 채널신호들을 장거리 전송하는 경제적인 광 링크를 구성한 뒤, 이 링크의 전송 성능 최적화를 위해 분산 맵 구조의 차이에 따른 성능 차이를 분석하였다. 이 링크의 분산 맵은 전치분산보상, 구간분산보상 그리고 후치분산보상으로 나누어지는데 이들의 다양한 조합을 통해 15 가지의 다양한 분산 맵들을 구성한 뒤 각각의 경우를 분석하여 링크 성능을 크게 향상시키는 최적화된 분산맵 구조를 구하였다. 또한, 이 최적화된 분산 조건이, 단일모드 광섬유와 분산보상 광섬유가 가지는 파장에 따른 분산 기울기의 불일치로 인해 받게 되는 영향을 조사하였고, 이 영향이 링크의 성능에 미치는 효과가 무시될 수 있는 분산 기울기의 허용 가능한 불일치 범위를 구했다.

SMF 길이와 중계 구간 당 잉여 분산의 분포가 균일한 분산 제어 광전송 링크 (Dispersion-managed Optical Links with the Uniform Distributions of SMF Lengths and Residual Dispersion Per Span)

  • 이성렬
    • 한국항행학회논문지
    • /
    • 제20권2호
    • /
    • pp.161-166
    • /
    • 2016
  • 대용량 장거리 광통신 시스템에서 광섬유가 갖는 색 분산과 비선형 효과 때문에 신호 왜곡이 발생한다. MSSI (mid-span spectral inversion)와 결합된 분산 제어 (DM; dispersion management) 기술은 이러한 단점을 극복할 수 있는 기술 중 하나이다. DM 링크의 가장 간단한 구조는 전송 링크를 구성하는 모든 광 중계 구간의 단일 모드 광섬유 (SMF; single mode fiber) 길이와 중계 구간 당 잉여분산 (RDPS; residual dispersion per span)을 모두 균일하게 분포시키는 것이다. 본 논문에서는 SMF 길이와 RDPS를 인위적으로 분포시키거나 랜덤하게 분포시킨 링크 구조에서의 성능 평가 시 중요한 기준이 되는 MSSI와 결합된 균일 분포 DM 링크에서의 시스템 성능을 중계 구간 수에 따라 분석하였다.

Characteristics of Compensation for Distorted Optical Pulse with Initial Frequency Chirp in 3 X 40 Gbps WDM Systems Adopted Mid-Span Spectral Inversion

  • Lee, Seong-Real;Lee, Yun-Hyun
    • Journal of electromagnetic engineering and science
    • /
    • 제3권2호
    • /
    • pp.79-85
    • /
    • 2003
  • In this paper, we investigated the degree of compensation for distorted optical pulse of wavelength division multiplexed(WDM) channel with initial frequency chirp generated in optical transmitter. The WDM channel signal distortion is due to chromatic dispersion, self phase modulation(SPM) and cross phase modulation(XPM) in fiber. The considered system is 3 ${\times}$ 40 Gbps intensity modulation direct detection(IM/DD) WDM transmission systems, which adopted mid-span spectral inversion(MSSI) as compensation method. We confirmed that the effect of initial frequency chirp on compensation for signal distortion due to a SPM is gradually decreased as a dispersion coefficient of fiber becomes gradually small. But, in the aspect of a compensation for signal distortion due to both SPM and XPM, the effect of initial frequency chirp on compensation is gradually decreased as a dispersion coefficient of fiber becomes gradually large.

5.12 Te/s(128채널 × 43 Gb/s) WDM 신호의 전송실험 (5.12 Tb/s (128 × 43 Gb/s) WDM transmission over 200 km of medium dispersion fiber)

  • 전상배;손의승;정승필;정윤철
    • 한국광학회지
    • /
    • 제16권2호
    • /
    • pp.143-145
    • /
    • 2005
  • 본 논문은 5.12-Tb/s(128 채널 ${\times} 43 Gb/s$) WDM 신호의 200 km 전송실험에 관한 것이다. 본 실험에서는 Medium Dispersion Fiber를 사용하여 0.8-(bits/s)/Hz의 스펙트럼 효율을 구현하였다. 전송 후 측정된 평균 Q-factor값은 15.2 dB이었다.

SMF 길이와 RDPS가 분포가 인위적으로 분포하는 분산 제어 링크에서 NRD 조절 위치에 따른 왜곡된 WDM 채널 보상 효과 (Effects of the Control Positions of NRD in Optical Link with the Artificially Distributed SMF Lengths and RDPSs on the Compensation for the Distroted WDM Channels)

  • 이성렬
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 춘계학술대회
    • /
    • pp.745-746
    • /
    • 2016
  • 분산 제어가 적용된 광전송 링크에서 각 중계 구간의 단일 모드 광섬유 (SMF; single mode fiber) 길이와 RDPS (residual dispersion per span)가 인위적으로 분포하는 경우 전체 잉여 분산 (NRD; net residual dispersion)을 조절하는 위치에 따른 왜곡된 WDM 채널의 보상 효과를 시뮬레이션을 통해 분석하였다.

  • PDF

효과적인 단열 펄스 압축을 위한 분산감소 광섬유의 분산 특성 및 입력 펄스 진폭 결정 (Determination of the dispersion profile of a dispersion decreasing fiber and the input pulse amplitude for efficient adiabatic pulse compression)

  • 최봉수;서동선
    • 전자공학회논문지D
    • /
    • 제34D권3호
    • /
    • pp.123-130
    • /
    • 1997
  • We determine the dispersion profile of a dispersion decreasing fiber(DDF) for optimum pulse compression from a trade-off between high pulse compression and low pedestal power/short DDF length. We find that the optimum vlaue of the exponential dispersion decreasing factor .alpha. is 0.95 and that the corresponding optimum fiber length is 1.5 times of the initial soliton period. Passing through the dDF, ~10 times of pulse comparession ratio can be achieved without significant increase in pedestal power. To compress relatively broad pulses using a given DDF optimized at a specific pulse width, we also detemrine the optimum input pulse amplitude, as a function of input pulse width.

  • PDF

Measurement of Zero Dispersion Wavelength in an Optical Fiber Using the Oscillatory Behavior of Four-Wave Mixing Efficiency

  • Kim, Dong-Hwan;Kim, Sang-Hyuck;Jo, Jae-Cheol;Choi, Sang-Sam
    • Journal of the Optical Society of Korea
    • /
    • 제5권1호
    • /
    • pp.20-24
    • /
    • 2001
  • Non-destructive measurement of zero-dispersion wavelength variation in a dispersion shifted fiber by four-wave mixing technique is carried out. The oscillatory behavior of the four-wave mixing efficiency is utilized for the measurement of the linear dispersion slope and zero-dispersion wavelength. A simple formula useful for engineering estimation of the characteristics of fiber four-wave mixing efficiency is presented.

Dispersion and Nonlinear Properties of Elliptical Air Hole Photonic Crystal Fiber

  • Rao, MP Srinivasa;Singh, Vivek
    • Current Optics and Photonics
    • /
    • 제2권6호
    • /
    • pp.525-531
    • /
    • 2018
  • The effect of eccentricity on dispersion and nonlinear properties of a photonic crystal fiber having elliptical air holes is investigated using a fully vectorial effective index method. It is found that the effective refractive index increases with increase of eccentricity. The dependence of dispersion and nonlinear properties of the PCF on the eccentricity of the air hole is investigated. It is revealed that eccentricity of the air hole affects the zero dispersion wavelength. Further, the nonlinear properties such as mode field area, nonlinear coefficient and self phase modulation of the Photonic crystal fibers are analyzed. The mode field area increases and the nonlinear coefficient decreases with increase in eccentricity. The variation of the self phase modulation with elliptical air hole is also discussed.

Photonic True-Time Delay for Phased-Array Antenna System using Dispersion Compensating Module and a Multiwavelength Fiber Laser

  • Jeon, Hyun-Bin;Lee, Hojoon
    • Journal of the Optical Society of Korea
    • /
    • 제18권4호
    • /
    • pp.406-413
    • /
    • 2014
  • An optical true-time delay beam-forming system using a tunable dispersion compensating module (DCM) for dense-wavelength division modulation (DWDM) and a multiwavelength fiber ring laser for a phased array antenna is proposed. The multiwavelength fiber ring laser has one output that includes four wavelengths; and four outputs that include only single-wavelength. The advantage of such a multiwavelength fiber ring laser is that it minimizes the number of devices in the phased array antenna system. The time delays according to wavelengths, which are assigned for each antenna element, are obtained from the tunable DCM. The tunable DCM based on a temperature adjustable Fabry-Perot etalon is used. As an experimental result, a DCM could be used to obtain the change of the beam angle by adjusting the dispersion value of the DCM at the fixed lasing wavelengths of the fiber ring laser in the proposed optical true-time delay.