• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.433-440
• /
• 2001

This study was to analyze characteristics of soils reinforced by FPF(Fibrillated Polypropylene Fiber). Laboratory test, model test and field tests were performed on soils reinforced by fibers, to evaluate the shear strength characteristics. For the silty sand, clayey sand and silty clay, the influence of fiber shape, fiber length and fiber content were evaluated from compaction test, direct shear test, uniaxial test, california bearing ratio(CBR) test. Fibrillated type fiber, 5cm long with a content of 0.5% shows 5∼30% increase of friction angle and 7∼55 percent increase of CBR value.

• 한국식품위생안전성학회지
• /
• 제7권4호
• /
• pp.153-163
• /
• 1992

Dietary fiber imparts both mutritional and functional properties to foods. This review deals with (1) the classification of dietary fiber, (2) the plant cell wall models, (3) the relations between structure and physicochemical and functional properties of dietary fiber and (4) the applications of dietary fiber in foods. Dietary fiber can be classified in terms of source, plant function, solubility, charge and topology. Plant cell wall models are presented to provide information on the interconnections of dietary fiber components which determines the content of soluble and insoluble dietary fiber content. In reality, physicochemical and functional properties of dietary fiber originate factors such as chemical constituents , charge, branching degree, conformation and etc. Dietary fibers possess a variety of functional properties in food systems, which thus make them useful in food application. In particular, rheology and gelation of water-soluble gums or hydrocolloids are discussed for their effects on food quality. A guideline s also listed for the gum selection to meet the best product requirements.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.457-460
• /
• 2000

Injection molding is the most widely used process for the industrial forming of plastic articles. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation·orientation and infection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of welding parts in injection-molded products is assessed. And the effects of fiber content and injection mold shapes on the fiber orientation in case of fiber reinforced polymeric composites are studied. experimentally.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.49-54
• /
• 2001

Using waste glass in concrete can cause crack and strength loss by the expansion of alkali-silica reaction(ASR). In this study, ASR expansion and properties of strength were analyzed in terms of brown waste glass content, and fibers(steel fiber, polypropylene fiber) and fiber content for reduction ASR expansion due to waste glass. In this accelerated ASTM C 1260 test of waste glass, pessimum content can not be found. Also, when used the fibers with waste g1ass, there is an effect on reduction of expansion and strength loss due to ASR between the alkali in the cement paste and the silica in the waste glass. Specially, adding 1.5 vol.% of steel fiber to 20% of waste glass the expansion ratio was reduced by 40% and flexural strength was developed by up to 110% comparing with only Waste glass ( $80^{\circ}C$ $H_{2}$ O curing).

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.213-214
• /
• 2012

This paper presents basic study to develop high performance concrete for concrete filled tube with addition content of steel fiber. In this study, all mixtures was added to nylon fiber (1.5 kg/㎥) and steel fiber was mixed by 0, 20 and 40 kg/㎥ respectively. To evaluate the property of high performance concrete was used to various test methods which were slump flow, air content, U-box test, O-lot test and L-flow(to 300 mm, 500 mm). Also, compressive strength test was measured by ages.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권8호
• /
• pp.1116-1124
• /
• 2005

The influence of fiber content of hay (low-fiber 47% NDF and high-fiber 62% NDF of DM) and concentrate level (high 50% and low 20% of ration DM) on chewing activity, passage rate and nutrient digestibility were tested on four restrict-fed (11.1 to 13.7 kg DM/d) Holstein cows in late lactation. Aspects of ruminal fermentation and digesta particle size distribution were also investigated on two ruminally cannulated (100 mm i.d.) cows of the same group of animals. All digestion parameters studied were more affected by the fiber content of the hay and its ratio to non structural carbohydrates than by the concentrate level. Giving a diet of high-fiber (62% NDF) hay and low concentrate level (20%) increased chewing activity but decreased solid passage rate and total digestibility of nutrients due to a limited availability of fermentable OM in the late cut fiber rich hay. A supplementation of high-fiber hay with 50% concentrate in the diet seems to improve the ruminal digestion of cell contents, whilst a depression of the ruminal fiber digestibility was not completely avoided. Giving a diet of low-fiber (47% NDF) hay and high concentrate level (50%) reduced markedly the chewing and rumination activity, affected negatively the rumen conditions and, consequently, the ruminal digestion of fiber. A reduction of the concentrate level from 50 to 20% in the diet of low-fiber hay improved the rumen conditions as reflected by an increase of the ruminal solid passage rate and of fiber digestibility and in a decrease of the concentration of large particles and of the mean particle size of the rumen digesta and of the faeces. Generally, it can be summarised that, (i) concentrate supplementation is not a strategy to overcome limitations of low quality (fiber-rich) hay, and (ii) increase of the roughage quality is an effective strategy in ruminant nutrition, especially when concentrate availability for ruminants is limited.

• Composites Research
• /
• 제19권6호
• /
• pp.16-22
• /
• 2006

다양한 조건 하에서 최상의 관통 특성을 발휘하기 위한 최적 조건에 대해 연구하였다. 섬유 종횡비(AR: 섬유 길이/섬유 직경), 계면 조건 그리고 섬유 함유량을 관통 저항력과 마찰력에 지대한 영향을 미치는 변수들로 고려하였다. 단섬유 강화고무의 관통 저항력은 기지에 비해 최대 3.4배 증가하였다. 동일한 섬유 종횡비와 섬유 함유량에서 계면 조건이 우수할수록 더 높은 관통 저항력을 보였다. 기지와 섬유 종횡비가 155이하인 일부 단섬유 강화고무의 마찰력은 존재치 않았다. 우수한 계면과 높은 섬유 종횡비를 갖는 단섬유 강화고무의 마찰력은 기지의 관통 저항력보다도 더 높았다. 전체적으로 계면 조건과 섬유 종횡비 그리고 섬유 함유량이 단섬유 강화고무의 관통 특성에 지대한 영향이 미침을 확인하였다.

• 한국식품영양과학회지
• /
• 제42권3호
• /
• pp.427-433
• /
• 2013

본 연구는 옥수수 섬유질을 수분주입량의 변화에 따라 압출성형 옥수수 섬유질과 탈전분 압출성형 옥수수 섬유질의 물리화학적 특성 변화를 측정하였다. 원료의 수분주입량은 30, 40, 50%로 조절하였으며 스크루 회전속도와 사출구 온도는 각각 200 rpm, $140^{\circ}C$로 고정시켜 압출성형 하였다. 일반성분 함량은 원료에 비해 감소하였으며, 수분주입량이 30%일 때 옥수수 섬유질과 탈전분 옥수수 섬유질의 불용성 식이섬유 함량은 감소하고 수용성 식이섬유 함량은 증가하였다. 압출성형 옥수수 섬유질의 비기계적 에너지, 직경팽화율, 밀도, 파괴력, 탄성계수는 수분함량이 증가할수록 감소하였고, 비길이는 증가하였다. 압출성형 옥수수 섬유질의 수분흡착지수와 환원당은 수분주입량이 증가할수록 변화가 없었으며 수분용해지수는 감소하였다. 반면에 탈전분 옥수수 섬유질의 수분흡착지수는 감소하고 수분용해지수와 환원당은 증가하였다. 수분주입량 30%일 때 유용성분의 추출이 미량 증가하는 것으로 보아 압출성형공정의 적용하여 섬유질에 포함된 유용성분의 추출이 용이할 것으로 생각된다.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1023-1030
• /
• 2001

The tensile properties of short nylon6 fiber reinforced NR and SBR have been investigated as functions of diameter ratio(DR), interphase condition, fiber aspect ratio(AR), and fiber content. The short-fiber(DR=3 and AR=2) reinforced SBR did not show the dilution effect for all interphase conditions. And the short-fiber(DR=3 and AR=2) reinforced NR did not show the dilution effect except for the no-coating. The better interphase condition, the lower dilution effect at same DR. The tensile moduli are significantly improved due to fiber content and diameter ratio at same interphase condition. The pull-out force increased with the DR. The better interphase condition, the higher pull-out force at same DR. It is found that the DR and AR have an important effect on tensile properties.

• Composites Research
• /
• 제13권5호
• /
• pp.10-17
• /
• 2000

계면상 조건과 단섬유 함유량 증가에 따른 강화고무의 피로특성에 대해 실험적 고찰을 하였다. 피로시험 후 기지고무의 스프링 상수는 약 21% 감소하였고, 강화고무는 반대로 증가하였다. 강화고무의 스프링 상수 변화율은 섬유함유량 증가에 따라 감소하였고, 계면상 조건이 우수할수록 변화율이 적었다. 피로시험 후 기지고무의 온도는 2.5배, 강화고무는 1.7∼2.0배 증가하였다. 강화고무의 온도 변화율은 섬유 함유량 증가에 따라 감소하였고, 동일한 섬유 함유량에서 계면상 조건이 우수할수록 변화율이 적었다. 이번 연구에서 접착제 402와 고무용액을 2번씩 도포한 경우가 가장 우수한 계면상 모델(C)이 되었다. 그리고 이러한 강화고무를 자동차의 Engine Mount Rubber, Bush 그리고 Stopper등의 적용을 검토하였다.