• 한국안광학회지
• /
• 제2권1호
• /
• pp.1-8
• /
• 1997

강탄성 구역 $S_k$ 상태에서 $S_p$ 상태로 스윗청 될 때 ${\beta}-Tb_2(MoO_4)_3$, 단결정의 자발변형텐서 값으로부터 격자점의 상대적 변위를 계산할 수 있는 공식을 유도하였다. 엔탈피의 보존법칙을 이용하여 특정 방향에 대한 문턱 스윗청력의 측정치를 이용하여 임의의 방향에 대한 문턱 스윗청력을 계산할 수 있는 공식을 유도하였으며, 이 공식에서 유도한 이론치와 (${\theta}=90^{\circ}$, ${\phi}$)가 ($90^{\circ}$, $15^{\circ}$), ($90^{\circ}$, $30^{\circ}$), ($90^{\circ}$, $45^{\circ}$), ($90^{\circ}$, $60^{\circ}$), ($90^{\circ}$, $75^{\circ}$)인 경우에 실측한 측정값은 잘 일치하였다.

• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.82-86
• /
• 2013

A poled lead zirconate titanate (PZT) cube specimen is subjected to impulse-type compressive stress with increasing magnitude in parallel to the poling direction at four room and high temperatures. During the ferroelastic domain switching induced by the compressive stress, electric displacement in the poling direction and longitudinal and transverse strains are measured. Using the measured responses, linear material properties, namely, the piezoelectric and elastic compliance coefficients, are evaluated by a graphical method, and the effects of stress and temperature are analyzed. Finally, the dependency of the evaluated linear material properties on relative remnant polarization is analyzed and discussed.

• The Korean Journal of Ceramics
• /
• 제1권4호
• /
• pp.197-203
• /
• 1995

Nearly fully dense PZT samples both with tetragonal and with morphotropic phase boundary compositions were prepared by the conventional powder processing and sintering. A micro-indentation technique was used to evaluate the dependence of fracture toughness on remanent polarization, crack length and the direction of crack propagation. The result shows that the toughness increases with the remanent polarization along the poling direction and decreases in the transverse direction. The dependence of toughness on the remanent polarization is neither symmetric nor linear but rather shown to be saturated quickly with the increase in remanent polariztion. R-curve behaviors are observed in both poled and unpoled samples. Sequential SEM and XRD studies on annealed, poled, ground, fractured and etched samples show that domain switching is evident as a viable toughening mechanism but might depend upon the rate of crack propagation. Grain bridging is also observed as one of the active toughening mechanisms.