• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.49-52
• /
• 2000

The hole flanging experiments are performed on a flat circular plates with a hole in the center and the flangeability and fracture behavior of TRIP steel and ferrite-bainite duplex steel were examined. Over the ranges of conditions investigated, the flangeability of ferrite-bainite duplex steel is better than TRIP steel and the term 'hole flanging capacity' introduced in this study. Fracture behavior of TRIP steel and ferrite-bainite duplex steel was characterized by petal formation at the edge of flange. In case of crack propagation, crack tip diversion that is supposed to be responsible for flangeability occurs more severely on HSLA Steel.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.147-152
• /
• 2002

Effect of lip shape on the hole flangeability of high strength steel sheets is investigated. Circular plates of various hole sizes are tested and the variation of lip length as well as the variation of thickness on the sectional views of the finished lip were studied. The conventional hole flanging process is limited to a certain limit hole diameter below which failure will ensue during the hole expansion. The intention of this work is to examine the effect of lip shape on the flangeability of TRIP steel and Ferrite-Bainite duplex steel and find out major parameters which can affect flanging shape of high strength hot rolled steels. Over the ranges of conditions investigated, the minimum hole diameter of F+B steel is better than TRIP steel. while, the lip-shape accuracy of TRIP steel is better than that of F+B steel. although the tensile strength and elongation of %P steel are superior than those of Ferrite-Bainite duplex steel, the flangeability is found to be not so strongly sensitive to the tensile properties but sensitive to displacement on the circumferential direction of hole edge.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1252-1262
• /
• 1999

자동차 휠, 멤버 등의 소재로 사용되는 인장강도 580MPa급 열연강판의 버링성형성을 향상시키기 위하여 강판의 신장 플랜지성(stretch-flangeability)에 대한 미세조직 및 열간압연후 냉각인자의 영향에 대하여 검토하였다. 열간압연후 3단 냉각제어 및 권취온도의 극저온화에 의하여 신장플랜지성이 우수한 페라이트-베이나이트 복합조직강의 제조가 가능하며, 3단 제어냉각에서 강판의 온도를 $Ar_3$ 직하의 페라이트변태역에서 일정 시간 유지하면 페라이트 변태 및 NbC의 석출이 조장됨을 확인하였다. 페라이트-베이나이트 복합조직 열연강판의 우수한 신장플랜지성은 3단 냉각 및 극저온 권취에 의한 등축 페라이트 분율의 증가, 입계 세멘타이트의 미세화 및 구성 상간의 경도차 저하에 의하여 타발공정에서의 미소균열 생성 및 전파가 억제되기 때문인 것으로 판단되었다. 아울러 0.08wt%C-1.5wt%Mn-0.04wt%Nb 성분계를 이용하여 제조된 인장강도 580MPa급 페라이트-베이나이트 복합조직 열연강판은 연신율 22% 이상, 구멍확장율 (신장플랜지성) 90% 이상의 재질특성을 가지며, 버링비 60% 이상의 자동차 휠 디스크에 적용 가능한 것으로 판명되었다.

• 소성∙가공
• /
• 제10권6호
• /
• pp.465-470
• /
• 2001

Hole flanging experiments are performed on flat circular plates with a hole in the center and the flangeability and fracture behaviors of TRIP steels and ferrite-Bainite duplex steels were examined. In the hole flanging, deformation by lip and petalling occurs when plates are struck by punches of various shapes and high circumferential strains induced in the target material cause radial cracking and the subsequent rotation of the affected plate material in a number of symmetric petals. In all cases, failure of the plate was due to lip fracture that results from multiple localized neckings that take place around the hole periphery where straining is most severe and a somewhat regular pattern was observed in a fracture shape. The neck characteristics in flange formation and the transition from the lip to petal mode at which fracture occurs were compared with two materials.