Biofilm is a structured community of microorganism encapsulated within a self-developed polymeric matrix and adherent to a living or a solid surface. In this study, we investigated the effects of various substrates on the formation of biofilm in Vibrio parahaemolyticus. We found that biofilm formation profoundly increased in a substrate, that consisted of calcium chloride, calcium nitrate, and calcium sulfate in 1% peptone water. On the other hand, a dramatic reduction in biofilm formation was observed in a substrate, that consisted of glucose and ferric chloride in LB broth. These results suggest that V. parahaemolyticus prefer to form a biofilm on the surface of a crustacean or a clam, where calcium ion is rich, and also where seawater temperature is relatively lower. In contrast, high levels of glucose in a crustacean or a clam body resulting from increased seawater temperature, can make V. parahaemolyticus detach from it and lead to free floating.
In the paper, with corrosion velocity measurement and metallographic observation on specimens after sulfuric acid/ferric sulfate boiling experiment, intergranular corrosion tendency of the new type ultra low carbon stainless steel developed by ourselves which experienced solution treatment at different temperatures was evaluated. A VHX 500 super depth field tridimensional microscope was used to observe corrosion patterns on the sample surfaces. The depth and width of grain boundary corrosion groove were measured by the tridimensional microscope, which indicated that the corrosion degrees of the samples which received solution treatment at different temperatures are quite different. Transgranular corrosion at different degree occurred along with forged glide lines. After comparison it was proved that the stainless steel treated at $1100^{\circ}C$ performs very well against intergranular corrosion.
The purpose of this study was to investigate the proprieties of practical application and possibility of bacterial leaching method to the low copper minerals in Korea. Therfore, ore samples and mine water of the Talsung, Ilkwang, Taekwang, Yongho and Siheung were analyzed chemically, mineralogically, and bacteriologically. The results obtained were as follows ; 1. The range of pH value was 2.6-3.8. 2. Copper contents in ore samples of Talsung and Ilkwang were 0.38% and 0.63%, and those in mine water of Talsung nad ilkwang were 584 .$\mu$g and 15.$\mu$g per ml, respectively. 3. Ferric sulfate contents in mine water of Tlsung and Ilkwang were 27.2.$\mu$g and 10.5.$\mu$g per ml, respectively. 4. Ferrobacillus ferroosxidans was isolated and identified from Talsung and Ilkwang mine water and specially Thiobacillus thiooxidans was isolated from Ilkwang mine water.
S.albus subsp.와 S.globosus에서 Tetracyclin과 Streptomycin 같은 항생물질을 생성된다는 것은 이미 전보에서 밝힌 바 있다. 이들 두 種의 생장최적조건과 항생제 생성정도와의 관계를 배지성분과 그 농도에 따라 검토하였다. 그 결과 S.albus subsp.와 S.globosus 모두 배양시간이 130~150시간이 될때 항생물질 생성과 균체량이 최고에 달했다. 그리고 PH는 그 근처에서만 떨어지는 현상을 볼 수 있었다. 또한 두 균주 모두 탄소원으로서는 starch(4~5%)질소원으로서는 soybeam meal(1.5~2.0%)에서 균체의 생장도 양호하고 향균력도 높게 나타났다. 이외의 성분으로는 calcium carbonate(2mg/ml), potassium phosphate' dibasic(0.05M~0.01M), magnesium sulfate(0.01M~0.03M) ferric chloride(0.01M)가 가장 생장에 좋은 배지농도로 추정되며 zinc ion(0.0005M)은 균체생장을 현저하게 억제하였다.
유포자 유산균인 Lactobacillus sporogenes 가 특이하게 균체외 $\beta$-galactosidase를 다량 생산하는 것을 발견하여 효소생산을 위한 영양요구성과 배양조건을 조사하였다. 영양요구성으로는 탄소원으로서 lactose 1%, 유기질소원으로서 peptone 1.5%, 무기질소원으로서 ammonium sulfate 0.2%, phosphorus 원으로 ammonium phosphate, dibasic을 0.8%. mineral은 potassium chloride 0.05%, ferric chloride 0.001% 첨가했을 때 최대의 효소생산을 나타내었다. 배지의 최적 initial pH는 7.0, 최적배양온도는 37$^{\circ}C$, aeration효과는 500$m\ell$용 진탕 flask에 배지량을 50~200$m\ell$ 주입, 140 strokes/min (진폭 7cm)으로 진탕 배양하였을 때 최고의 효소생산을 나타냈다. 상기의 최적조건에서 균체증식은 24시간 배양에 최고에 달하는 반면 $\beta$-galactosidase 생산은 균체내 효소생산의 경우 균체증식 속도와 비례적으로 증가하여 배양 24시간 전후에서 30U/$m\ell$로 최고치를 나타내고 균체외 효소는 배양 40시간 전후 즉, 균증식의 후기 정지기에서 38U/$m\ell$로 가장 높은 효소생산량을 보였다. 또한 fermentor 실험 역시 flask배양과 거의 비슷한 배양 양상을 보였으며 균체외 효소역가는 45U/$m\ell$로 진탕 flask 배양 결과보다 다소 양호하였다.
Hiroyuki Kokawa;Masayuki Shimada;Wang, Zhan-Jie;Yutaka S. Sato
대한용접접합학회:학술대회논문집
/
대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
/
pp.250-254
/
2002
Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.
유치의 치수절단술에 사용되는 약제로는 formocresol, ferric sulfate, 수산화칼슘 등이 있다. 그 중에서 formocresol은 치수조직의 고정능력과 높은 임상적 성공을 보임으로써 아직까지 널리 사용되고 있으나 자체독성이 매우 강하여 영구 계승치 치배의 변위나 결손, 법랑질 형성부전, 전신 흡수로 인한 돌연변이 가능성과 암유발 가능성 역시 보고되고 있다. 최근에는 formocresol의 근관내 적용시 불완전한 임시충전에 의한 미세누출로 주위 치은과 치조골의 괴사를 야기한 보고가 있으며 과잉의 formocresol을 적용하였을 경우에도 치조골의 괴사의 원인이 될 수 있다고 하였다. 본 증례는 개인치과에서 formocresol을 이용한 치수치료를 받은 후 지속되는 동통으로 인해 상악 좌측 제 2유구치를 발거하였으나, 증상이 개선되지 않아 본원에 의뢰되었다. 환아는 8세 남아로 심한 구취 및 계승 영구치 치관 주위로 환형의 치조골 괴사를 보여 부골절제술을 시행하고 1년 7개월간 관찰을 하였을 때 정상적인 치근 성장은 이루어졌으나 결손된 치조골 및 부착치은의 완전한 조직재생 소견은 관찰되지 않았다. Formocresol에 의한 치주조직에 대한 부작용은 비가역적이므로 formocresol의 사용에 있어 적응증 여부를 잘 판단해야 하며, 철저한 임시 가봉에 주의를 기울여야 할 것이다.
물에 대한 용해도가 높아 수질오염을 시킬 가능성이 있는 제초제 dicamba를 분해시키기 위하여 zerovalent iron 및 Fenton reagent를 처리하여 분해되는 정도와 분해산물을 동정하였다. ZVI에 의한 dicamba의 분해 반응속도는 pH 3.0이 pH 5.0 조건보다 빠르게 진행되었으며 처리된 ZVI의 양이 0.05%에서 1.0%(w/v)로 증가됨에 따라 분해율이 증가되어 반응 3시간 이내에 90% 이상이 분해되었다. 그러나 ZVI의 처리량이 증가됨에 따라 반응후 용액의 pH 상승으로 인하여 dicamba의 분해효율은 증가되지 않았다. ZVI 처리에 의해 생성된 dicamba의 분해 산물을 diazomethane 유도체화 과정을 거쳐 GC-MS로 분석한 결과 dicamba 구조내의 잔기가 없는 부분에 hydroxylation된 형태인 4-hydroxy dicamba 혹은 5-hydroxy dicamba, 4,5-dihydroxy dicamba 그리고 dicamba 구조내의 carboxyl기가 hydroxyl기로 전환된 형태인 3,6-dichloro-2-methoxyphenol로 예상되는 compound를 확인하였다. 이러한 반응산물은 ferric sulfate를 이용한 Fenton 반응에서 조사된 dicamba의 분해 산물과 동일한 것으로 확인되었다. 그러나 ZVI에 의한 dicamba의 탈염소화 분해산물은 확인되지 않았다. 따라서 호기적 조건 하에서 ZVI 처리에 의해 유도되는 제초제 dicamba의 주된 분해 경로는 환원반응보다는 반응용액 중에 존재하는 $O_2$와 $Fe^0$의 산화에 의해 생성된 $Fe^{2+}$ 사이의 Fenton 반응과 같은 산화반응인 것으로 사료된다.
본 연구는 응집공정과 오존처리공정으로 생물학적 난분해성 물질을 함유한 매립장 침출수를 처리하고, 전 오존처리와 후 오존처리에 의한 수처리 효율을 비교 분석하기 위하여 실시하였으며, 결과를 아래와 같이 요약하였다. 1) $COD_{Cr}$을 제거하기 위하여 침출수의 pH를 4,7,11로 조절하고, 오존주입량을 $75mgO_3/min$ ($4.5gO_3/hr$)으로 90분간 오존처리한 결과 각 pH별 제거효율은 각각 48.2%, 52.6%, 62.3%로 나타났다. pH를 증가시킴으로써 $COD_{Cr}$의 제거효율이 증가하였는데, 이는 높은 pH에서 오존의 가기 분해속도가 빨라져 비선택적으로 수중 유기물과 반응하고, 오존보다 산화력이 강한 hydroxyl radical($OH{\cdot}$)의 생성이 촉진되었기 때문으로 판단된다. 2) 주 응집제로 사용되는 무기응집제는 폐수처리에 많이 이용되고 있는 alum, ferric chloride 및 ferrous sulfate를 이용하였으며, 그 결과 pH5와 응집제 주입량 $2,000m{\ell}/{\ell}$에서 Ferric chloride가 12.0%의 $COD_{Cr}$ 제거효율로 가장 우수한 것으로 조사되었다. 그리고 응집보조제로 사용한 유기 응집제는 cation(C-101P), anion(A-601P) 및 nonion(SC-050)을 이용한 결과 cation(C-101P)이 pH5와 주입량 $100m{\ell}/{\ell}$에서 19.8%의 $COD_{Cr}$제거효율로 가장 효율적인 응집보조제로 조사되었다. 3) 오존주입량을 $75mgO_3/min$ ($4.5gO_3/hr$)으로 90분간 오존처리한 결과 색도와 탁도는 각각 88.6%와 97%가 제거되었으며, $COD_{Cr}$ 및 $COD_{Mn}$보다 훨씬 높은 제거효율을 보인 것은 오존이 색도 및 탁도 유발물질을 선택적으로, 그리고 우선적으로 산화시킨 것으로 판단된다. 4) $COD_{Cr}$ 색도 및 탁도는 후 오존처리보다 전 오존처리에 의하여 8.0%, 3.5%, 그리고 1% 각각 제거 효율이 증가하였는데, 이는 응집전 오존처리가 응집효율을 증가시킨다는 여러 연구결과와 일치하는 것으로 조사되었다.
This study was conducted to remove the dyes in dye wastewater by the chemical precipitation or biological treatment which are one of the main pollutants in dye wastewater. In order to remove the disperse dyes effectively in aqueous solution by chemical precipitation process, coagulation and flocculation tests were carried out using several coagulants on various reaction conditions. It was found that the Ferrous sulfate was the most effective coagulant for the removal of disperse dye(DB79), and we could get the best result for the removal of disperse dye(DB56) in the aspects of TOC removal efficiency and sludge yield. When the Ferrous sulfate dosage was 800mg/l, the sludge settling velocity was very fast$(SV_{30}=4\%)$, and the color was effectively removed in the disperse dye(DB79) solution. Although the color removal was ineffective when the Alum was used as a coagulant, the sludge yield decreased in comparison with the Ferrous sulfate or the Ferric sulfate being used in the disperse dye(DB56) solution. In order to decolorize disperse dye(DR17) by using biological treatment process, a strain which has potential ability to degrade disperse dyes was isolated from natural system. The optimal culture conditions of temperature and pH were found to be $40^{\circ}C\;and\;8.5\~9$, respectively. When yeast extract was mixed with polypeptone at the mixing ratio of 1:1 as a nitrogen source, decolorization efficiency was highest$(93\%)$ among the nitrogen sources. The strain screened was excellent to adjust to pH, and it seems to have ability to control pH needed to growth. The optimal culture conditions in concentration of $MgSO_{4.}\cdot7H_2O\;and\;KH_2PO_4$ were $0.1\%(w/v)\;and\;0.2\%(w/v)$, respectively. Strains degrading and decolorizing reactive dyes, RB198 and RR141 which were isolated from water system, are named RBK1 and RRK. And the cell growth characteristics of RBK1 and RRK were investigated. The optimal culture conditions of temperature and pH were found to be 30t' and 7.0, respectively. Optimum nitrogen source was peptone, and it was found that decolorization efficiencies by strains RBK1 and RRK, were $85\%\;and\;62\%$, respectively, with introduction of 4,000mg/l of peptone. In the case of RBK1, color removal efficiencies were very high below 400mg/l. Decolorization efficiency was over $90\%$ at 20hours of culture time. The Color degradation ability of RRK was lower than that of RBK1.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.