• 한국세라믹학회지
• /
• 제24권3호
• /
• pp.215-222
• /
• 1987

${\alpha}$-Ferric Hydrous Oxide and ${\alpha}$-Ferric Oxide were obtained as following processes that Ferric Nitrate solution was adjusted to pH 6-8 with Ammonium Hydroxide, refluxed the Iron precipitate for 1 hr. at 80$^{\circ}C$, washed it with water and Methanol (95%), dried it to obtain ${\alpha}$-Ferric Hydrous Oxide at 60$^{\circ}C$, and then heated in atmosphere to prepare ${\alpha}$-Ferric Oxide for 1 hr. at 450$^{\circ}C$. Mica particles cleaned with ultrasonicator (45KHz) in water were mixed with Ferric Nitrate solution and treated it to adsorb ${\alpha}$-Ferric Oxide on the surface of mica particles by using the abovementioned processes, but the heated temperature was at 500$^{\circ}C$. The maximum wavelength of reflected light on the surface of mica-${\alpha}$-Ferric Oxide (50%) was appeared at 546nm but -Ferric Oxide free mica only was at 436 nm. The maximum wavelength was shifted to longer when the weight ratios of ${\alpha}$-Ferric Oxide to mica was changed from 1% to 50%.

• 한국세라믹학회지
• /
• 제13권1호
• /
• pp.25-29
• /
• 1976

The properties vary with quality of ferric-oxide that is major material of ferrites. In this point of view, a manufacturing method of pure and homogeneous fine ferric oxide is very important. The characters of this study are as follows: 1) Ferric oxide was made from waste pickling liquor of steel. 2) The crude ferric-oxide that is made by roasting the pickling liquor was dissolved in 20% HCI solution and then produced ferric chloride is purified by ethyl ether extraction. 3) The methanol solution of purified ferric chloride was sprayed into the refractory tube with compressed air and propane gas and then ignited leading to the ferric-oxide powder. 4) The produced oxide powder was introduced to the scrubber type vessel throught cooling system in order to collect the powder. 5) Crystalline phase of the powder was identified by X-ray diffraction and particle size, crystalline shape of the powder were investigated by settling method and electron microscope and the effects of concentration of ferric chloride in methanol on grain size were discussed. Results were obtained as fellows: 1) Total impurity in the ferric oxide produced from waste pickling liquor was 3.7%. 2) The solubilityof crude ferric oxide that was made from waste pickling liquor in HCI solution increased with the HCI concentration and reached to saturation range at 15% HCI concentration. 3) Extraction of FeCl3 increased with HCI concentration which is solvent. 4) Alpha ferric oxide obtained was very fine crystalline particles, the mean crystalline grain increased with the concentration of ferric chloride, and mean grain size distributed from 3.5$\mu$(at 0.5mole/l) to 0.5$\mu$(at 0.05mole/l).

• 한국광물학회지
• /
• 제24권3호
• /
• pp.189-194
• /
• 2011

화성의 암권 진화 연구에서 최근 각광받는 광물은 적철석으로 대표되는 3가철 산화물이다. 물리적 방법의 하나인 잔류자화기억도 실험은 비파괴적이고 지구 기원이 아닌 고체 시료의 자화특성 규명에 유용하게 사용된다. 금번 연구에서는 알루미늄 농도를 조절하며 열수반응과 탈수반응을 통해 총 8개 성분의 3 가철 산화물을 합성하였다. 이들 시료에 대해 잔류자화기억도와 자화상실온도($T_N$)를 측정하였다. 3가철 산화물의 격자상수는 알루미늄의 3가철 함량이 증가하며 감소한다. 3 가철 산화물의 자화상실 온도 역시 알루미늄의 몰농도가 증가하며 감소한다. 알루미늄이 거의 첨가되지 않은 적철석의 $T_N$은 광물의 합성방법과 무관하게 대략 $690^{\circ}C$로 수렴한다. 탈수반응으로 합성된 3가철 산화물의 잔류자화기억도는 알루미늄의 함량에 거의 무관하게 매우 높지만, 열수반응으로 합성된 3가철 산화물의 잔류자화기억도는 알루미늄 함량이 증가하며 동반 상승한다. 상대적으로 쉽고 측정이 간단하며 비파괴적인 잔류자화기억도를 이용하면 추후 암석 내 3가철 산화물 입자의 성인 유추가 가능하며, 특히 화성의 암권 진화 규명에도 일조하리라 예상된다.

• 자원리싸이클링
• /
• 제11권5호
• /
• pp.21-23
• /
• 2002

A new process based on the co-precipitation method was developed fer removing harmful impurities during Mn-Zn ferrite production such as $SiO_2$ and P from waste pickle liquor. By this process a final result of less than 100 ppm of $SiO_2$ and less than 10 ppm of P content in the ferric oxide is easily attained. Though Ca cannot be removed by this process, water rinsing of the ferric oxide is effective fer reducing Ca content to less than 100 pm. For further purification, the origins of each impurity must be investigated and then taken away.

• 사상체질의학회지
• /
• 제3권1호
• /
• pp.173-183
• /
• 1991

These studies were conducted about the effects of Ferric oxide in the aspect of the basic pharmacology through experimental animals with the investigation of its clinical effects on oriental medical literatures of Ferric oxide. The results were as follows: 1. The analgenic effects induced by acetic acid were significant. 2. The anticonvulsive effects induced by ECT unit were significant. 3. The sedative effects in Rotor rod method were significant. 4. The number of platelets was increased but not significantly. 5. Prothrombin time was decreased significantly. 6. Fibrinogen was increased but not significantly. 7. The degree of concentration of FDP was decreased significantly. According to the above results, it is considered that Ferric oxide retains effectiveness on the treatment of cerebral stroke.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2577-2583
• /
• 2009

Presented are the formation of iron oxide layers on evaporator tubes in an actual fossil power plant operated under all volatile treatment (AVT) condition and an experimental simulation of iron oxide formation in the presence of ferrous and ferric ions. After actual operations for 12781 and 36326 hr in the power plant, two iron oxide layers of magnetite on the evaporator tubes were found: a continuous inner layer and a porous outer layer. The experimental simulation (i.e., artificial corrosion in the presence of ferrous and ferric ions at 100 ppm level for 100 hr) reveals that ferrous ions turn the continuous inner oxide layer on tube metal to cracks and pores, while ferric ions facilitate the production of porous outer oxide layer consisting of large crystallites. Based on a comparison of the oxide layers produced in the experimental simulation with those observed on the actually used tubes, we propose possible routes for oxid layer formation schematically. In addition, the limits of the proposed corrosion routes are discussed in detail.

• Journal of Pharmaceutical Investigation
• /
• 제35권6호
• /
• pp.467-469
• /
• 2005

The purpose of this study was to investigate main ingredients of Hwangtoh (Korean yellow ochre), especially ferric oxide $(Fe_{2}O_{3})$ content. In this study, X-ray fluorescence spectrophotometry was employed to analyze the ingredients of Hwangtoh. The ferric oxide $(Fe_{2}O_{3})$ contents of Hwangtoh from Hwa Sun, Ham An, Chil Gok, Sun Chun, Ha Dong, San Chung, Go Chang, Kim Che and Jeong Eup were 1.5, 5.66, 11.76, 6.63, 2.74, 11.4, 4.84, 7.21 and 6.23%, respectively. Based on the above results, any Hwangtoh sample didn't meet the ferric oxide $(Fe_{2}O_{3})$ content criterion.

• 상하수도학회지
• /
• 제27권5호
• /
• pp.641-648
• /
• 2013

Arsenic (As) contamination in drinking water is severe problem for about 100 million people who live in Bangladesh, Cambodia, Nepal, India, Vietnam, Myanmar, Mongolia, and Ethiopia etc. Chronic doses cause skin cancer, blackfoot disease, and cardiac damage. Even though the biosand filter (BSF) is popular in many developing countries, it could not remove effectively hazardous ions as As. Adsorbent is effective and feasible to reduce As. In this study the improved biosand filter (iBSF) was embedded with adsorbent, was tested to evaluate As removal as well as organic removal. In 20 days removal of turbidity, bacteria, and $UV_{254}$ have shown 60-95 % removal. Arsenic was removed more than 99.9 % in the columns embedded with silica oxides of ferric manganese ($FM{\alpha}$) while 5.8 ~ 38.3 % in columns without $FM{\alpha}$. Isotherm test showed that average amount of the adsorbed arsenic on the oxides was 0.56 mg/G.

• 한국재료학회지
• /
• 제20권6호
• /
• pp.301-306
• /
• 2010

The chemical formula of magnetite ($Fe_3O_4$) is $FeO{\cdot}Fe_2O_3$, t magnetite being composed of divalent ferrous ion and trivalent ferric ion. In this study, the influence of the coexistence of ferrous and ferric ion on the formation of iron oxide was investigated. The effect of the co-precipitation parameters (equivalent ratio and reaction temperature) on the formation of iron oxide was investigated using ferric sulfate, ferrous sulfate and ammonia. The equivalent ratio was varied from 0.1 to 3.0 and the reaction temperature was varied from 25 to 75. The concentration of the three starting solutions was 0.01mole. Jarosite was formed when equivalent ratios were 0.1-0.25 and jarosite, goethite, magnetite were formed when equivalent ratios were 0.25-0.6. Single-phase magnetite was formed when the equivalent ratio was above 0.65. The crystallite size and median particle size of the magnetite decreased when the equivalent ratio was increased from 0.65 to 3.0. However, the crystallite size and median particle size of the magnetite increased when the reaction temperature was increased from $25^{\circ}C$ to $75^{\circ}C$. When ferric and ferrous sulfates were used together, the synthetic conditions to get single phase magnetite became simpler than when ferrous sulfate was used alone because of the co-existence of $Fe^{2+}$ and $Fe^{3+}$ in the solution.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.123-125
• /
• 2005